Failed
gprs:sysmo.cs_paging_gprs_active.py (from gprs_sysmo)
Stacktrace
osmo-stp_10.42.42.5(pid=20316): Process ended prematurely: osmo-stp_10.42.42.5(pid=20316) [trial-2397↪gprs:sysmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=20316)]
Standard Output
---------------------------------------------- trial-2397 gprs:sysmo cs_paging_gprs_active.py ---------------------------------------------- 00:46:07.504487 tst gprs:sysmo: Using 1 x ip_address (candidates: 9) 00:46:07.514990 tst gprs:sysmo: Using 1 x bts (candidates: 1) 00:46:07.638503 tst cs_paging_gprs_active.py: using LAC 37372 00:46:07.765463 tst cs_paging_gprs_active.py: using RAC 142 00:46:07.885577 tst cs_paging_gprs_active.py: using CellId 37372 00:46:08.003013 tst cs_paging_gprs_active.py: using BVCI 37373 00:46:08.026173 tst gprs:sysmo: Using 1 x ip_address (candidates: 9) 00:46:08.036720 tst gprs:sysmo: Using 1 x ip_address (candidates: 9) 00:46:08.047313 tst gprs:sysmo: Using 1 x ip_address (candidates: 9) 00:46:08.057685 tst gprs:sysmo: Using 1 x ip_address (candidates: 9) 00:46:08.067969 tst gprs:sysmo: Using 1 x ip_address (candidates: 9) 00:46:08.078376 tst gprs:sysmo: Using 1 x ip_address (candidates: 9) 00:46:08.088717 tst gprs:sysmo: Using 1 x ip_address (candidates: 9) 00:46:08.099008 tst gprs:sysmo: Using 1 x ip_address (candidates: 9) 00:46:08.109590 tst gprs:sysmo: Using 1 x modem (candidates: 4) 00:46:08.224782 tst gprs:sysmo: Using 1 x modem (candidates: 4) 00:46:08.520511 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 00:46:08.657906 run iperf3-srv_10.42.42.10: Starting iperf3-srv 00:46:08.995023 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=20306): Launched 00:46:09.274814 run iperf3-srv_10.42.42.10(pid=20307): Launched 00:46:09.474287 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 00:46:09.609718 run iperf3-srv_10.42.42.10: Starting iperf3-srv 00:46:09.946149 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=20308): Launched 00:46:10.224794 run iperf3-srv_10.42.42.10(pid=20309): Launched 00:46:10.424186 tst cs_paging_gprs_active.py:38: start network... 00:46:10.559877 run osmo-hlr_10.42.42.2: Starting osmo-hlr 00:46:11.071867 run create_hlr_db(pid=20310): Launched 00:46:11.260000 bus /sierra_2: Setting Powered False 00:46:12.280537 run create_hlr_db(pid=20310): Terminated: ok {rc=0} 00:46:12.686242 run pcap-recorder_any(filters='host 10.42.42.2')(pid=20312): Launched 00:46:12.987226 run osmo-hlr_10.42.42.2(pid=20313): Launched 00:46:13.097541 run osmo-stp_10.42.42.5: Starting osmo-stp 00:46:13.618113 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=20315): Launched 00:46:13.920446 run osmo-stp_10.42.42.5(pid=20316): Launched 00:46:14.031055 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 00:46:15.537631 run pcap-recorder_any(filters='host 10.42.42.6')(pid=20318): Launched 00:46:15.644771 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 00:46:15.947208 run patchelf(pid=20319): Launched 00:46:16.138380 run osmo-stp_10.42.42.5(pid=20316): ERR: Terminated: ERROR {rc=1} [trial-2397↪gprs:sysmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=20316)] 00:46:16.270550 run osmo-stp_10.42.42.5(pid=20316): stdout: | (launched: 2022-12-14_00:46:13.771267) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 00:46:16.401918 run osmo-stp_10.42.42.5(pid=20316): stderr: | �[0;m�[38;5;43m20221214004613937 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214004613937 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214004613937 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214004613937 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214004613938 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214004613938 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214004613938 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 00:46:16.529571 run osmo-stp_10.42.42.5(pid=20316): stdout: | (launched: 2022-12-14_00:46:13.771267) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 00:46:16.656197 run osmo-stp_10.42.42.5(pid=20316): stderr: | �[0;m�[38;5;43m20221214004613937 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214004613937 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214004613937 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214004613937 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214004613938 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214004613938 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214004613938 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 00:46:16.803085 run patchelf(pid=20319): Terminating (SIGINT) 00:46:16.977512 run patchelf(pid=20319): Terminated: ok {rc=0} 00:46:17.009399 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=20316): Process ended prematurely: osmo-stp_10.42.42.5(pid=20316) [trial-2397↪gprs:sysmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=20316)] [trial-2397↪gprs:sysmo↪cs_paging_gprs_active.py:38] 00:46:17.020150 tst cs_paging_gprs_active.py:38: Test FAILED (9.5 sec) 00:46:17.080431 run osmo-hlr_10.42.42.2(pid=20313): ERR: Terminated: ERROR {rc=237} [trial-2397↪gprs:sysmo↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=20313)] 00:46:17.129797 run osmo-hlr_10.42.42.2(pid=20313): stdout: | (launched: 2022-12-14_00:46:12.838715) 00:46:17.179136 run osmo-hlr_10.42.42.2(pid=20313): stderr: | �[0;m�[1;31m20221214004613010 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214004613010 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214004613010 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214004613010 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214004613010 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214004613010 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214004613030 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2397/run.2022-12-14_00-40-22/gprs:sysmo/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214004613040 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214004613040 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214004613041 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 00:46:17.222386 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=20306): Terminating (SIGTERM) 00:46:17.261270 run iperf3-srv_10.42.42.10(pid=20307): Terminating (SIGTERM) 00:46:17.300156 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=20308): Terminating (SIGTERM) 00:46:17.339049 run iperf3-srv_10.42.42.10(pid=20309): Terminating (SIGTERM) 00:46:17.378010 run pcap-recorder_any(filters='host 10.42.42.2')(pid=20312): Terminating (SIGTERM) 00:46:17.417024 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=20315): Terminating (SIGTERM) 00:46:17.455881 run pcap-recorder_any(filters='host 10.42.42.6')(pid=20318): Terminating (SIGTERM) 00:46:17.464853 --- ParallelTerminationStrategy: PID 20306 died... 00:46:17.517128 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=20306): Terminated: ok {rc=0} 00:46:17.526461 --- ParallelTerminationStrategy: PID 20307 died... 00:46:17.578264 run iperf3-srv_10.42.42.10(pid=20307): Terminated {rc=256} 00:46:17.587565 --- ParallelTerminationStrategy: PID 20308 died... 00:46:17.639511 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=20308): Terminated: ok {rc=0} 00:46:17.648875 --- ParallelTerminationStrategy: PID 20309 died... 00:46:17.700755 run iperf3-srv_10.42.42.10(pid=20309): Terminated {rc=256} 00:46:17.710465 --- ParallelTerminationStrategy: PID 20312 died... 00:46:17.763313 run pcap-recorder_any(filters='host 10.42.42.2')(pid=20312): Terminated: ok {rc=0} 00:46:17.772698 --- ParallelTerminationStrategy: PID 20315 died... 00:46:17.824820 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=20315): Terminated: ok {rc=0} 00:46:17.834204 --- ParallelTerminationStrategy: PID 20318 died... 00:46:17.886186 run pcap-recorder_any(filters='host 10.42.42.6')(pid=20318): Terminated: ok {rc=0} 00:46:17.973059 bus /gobi_0: Setting Powered False 00:46:19.075165 bus /gobi_0: Setting Powered False 00:46:20.184117 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=20316): Process ended prematurely: osmo-stp_10.42.42.5(pid=20316) [trial-2397↪gprs:sysmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=20316)]