Failed
gprs:trx-lms+mod-bts0-egprs.cs_paging_gprs_active.py (from gprs_trx-lms+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=24159): Process ended prematurely: osmo-stp_10.42.42.5(pid=24159) [trial-2397↪gprs:trx-lms+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=24159)]
Standard Output
---------------------------------------------- trial-2397 gprs:trx-lms+mod-bts0-egprs cs_paging_gprs_active.py ---------------------------------------------- 01:29:44.382531 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 01:29:44.393877 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x bts (candidates: 1) 01:29:44.532467 tst cs_paging_gprs_active.py: using LAC 37603 01:29:44.650393 tst cs_paging_gprs_active.py: using RAC 118 01:29:44.768816 tst cs_paging_gprs_active.py: using CellId 37603 01:29:44.889562 tst cs_paging_gprs_active.py: using BVCI 37604 01:29:44.912782 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 01:29:44.923655 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 01:29:44.934304 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 01:29:44.944994 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 01:29:44.955515 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 01:29:44.966057 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 01:29:44.976781 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 01:29:44.987228 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 01:29:44.998153 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x modem (candidates: 4) 01:29:45.119484 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x modem (candidates: 4) 01:29:45.398548 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 01:29:45.524826 run iperf3-srv_10.42.42.10: Starting iperf3-srv 01:29:45.844417 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=24149): Launched 01:29:46.131061 run iperf3-srv_10.42.42.10(pid=24150): Launched 01:29:46.319663 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 01:29:46.449310 run iperf3-srv_10.42.42.10: Starting iperf3-srv 01:29:46.810362 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=24151): Launched 01:29:47.115248 run iperf3-srv_10.42.42.10(pid=24152): Launched 01:29:47.318856 tst cs_paging_gprs_active.py:38: start network... 01:29:47.455967 run osmo-hlr_10.42.42.2: Starting osmo-hlr 01:29:47.970373 run create_hlr_db(pid=24153): Launched 01:29:48.158366 bus /gobi_6: Setting Powered False 01:29:49.178468 run create_hlr_db(pid=24153): Terminated: ok {rc=0} 01:29:49.613884 run pcap-recorder_any(filters='host 10.42.42.2')(pid=24155): Launched 01:29:49.940472 run osmo-hlr_10.42.42.2(pid=24156): Launched 01:29:50.061948 run osmo-stp_10.42.42.5: Starting osmo-stp 01:29:50.631971 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=24158): Launched 01:29:50.960376 run osmo-stp_10.42.42.5(pid=24159): Launched 01:29:51.078119 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 01:29:51.647177 run pcap-recorder_any(filters='host 10.42.42.6')(pid=24161): Launched 01:29:51.763231 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 01:29:52.048600 run patchelf(pid=24162): Launched 01:29:52.241038 run osmo-stp_10.42.42.5(pid=24159): ERR: Terminated: ERROR {rc=1} [trial-2397↪gprs:trx-lms+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=24159)] 01:29:52.380816 run osmo-stp_10.42.42.5(pid=24159): stdout: | (launched: 2022-12-14_01:29:50.797663) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 01:29:52.520570 run osmo-stp_10.42.42.5(pid=24159): stderr: | �[0;m�[38;5;43m20221214012950992 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214012950992 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214012950992 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214012950993 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214012950993 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214012950993 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214012950993 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 01:29:52.655236 run osmo-stp_10.42.42.5(pid=24159): stdout: | (launched: 2022-12-14_01:29:50.797663) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 01:29:52.788391 run osmo-stp_10.42.42.5(pid=24159): stderr: | �[0;m�[38;5;43m20221214012950992 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214012950992 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214012950992 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214012950993 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214012950993 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214012950993 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214012950993 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 01:29:52.943869 run patchelf(pid=24162): Terminating (SIGINT) 01:29:53.126469 run patchelf(pid=24162): Terminated: ok {rc=0} 01:29:53.159907 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=24159): Process ended prematurely: osmo-stp_10.42.42.5(pid=24159) [trial-2397↪gprs:trx-lms+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=24159)] [trial-2397↪gprs:trx-lms+mod-bts0-egprs↪cs_paging_gprs_active.py:38] 01:29:53.169993 tst cs_paging_gprs_active.py:38: Test FAILED (8.8 sec) 01:29:53.233838 run osmo-hlr_10.42.42.2(pid=24156): ERR: Terminated: ERROR {rc=237} [trial-2397↪gprs:trx-lms+mod-bts0-egprs↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=24156)] 01:29:53.285707 run osmo-hlr_10.42.42.2(pid=24156): stdout: | (launched: 2022-12-14_01:29:49.778824) 01:29:53.338084 run osmo-hlr_10.42.42.2(pid=24156): stderr: | �[0;m�[1;31m20221214012949979 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214012949979 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214012949979 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214012949979 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214012949979 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214012949979 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214012949991 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2397/run.2022-12-14_00-40-22/gprs:trx-lms+mod-bts0-egprs/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214012949999 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214012949999 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214012949999 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 01:29:53.383178 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=24149): Terminating (SIGTERM) 01:29:53.425313 run iperf3-srv_10.42.42.10(pid=24150): Terminating (SIGTERM) 01:29:53.467525 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=24151): Terminating (SIGTERM) 01:29:53.509564 run iperf3-srv_10.42.42.10(pid=24152): Terminating (SIGTERM) 01:29:53.551980 run pcap-recorder_any(filters='host 10.42.42.2')(pid=24155): Terminating (SIGTERM) 01:29:53.594204 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=24158): Terminating (SIGTERM) 01:29:53.636270 run pcap-recorder_any(filters='host 10.42.42.6')(pid=24161): Terminating (SIGTERM) 01:29:53.646070 --- ParallelTerminationStrategy: PID 24149 died... 01:29:53.702712 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=24149): Terminated: ok {rc=0} 01:29:53.712777 --- ParallelTerminationStrategy: PID 24150 died... 01:29:53.768900 run iperf3-srv_10.42.42.10(pid=24150): Terminated {rc=256} 01:29:53.778960 --- ParallelTerminationStrategy: PID 24151 died... 01:29:53.835328 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=24151): Terminated: ok {rc=0} 01:29:53.845431 --- ParallelTerminationStrategy: PID 24152 died... 01:29:53.901790 run iperf3-srv_10.42.42.10(pid=24152): Terminated {rc=256} 01:29:53.911889 --- ParallelTerminationStrategy: PID 24155 died... 01:29:53.968334 run pcap-recorder_any(filters='host 10.42.42.2')(pid=24155): Terminated: ok {rc=0} 01:29:53.978505 --- ParallelTerminationStrategy: PID 24158 died... 01:29:54.034867 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=24158): Terminated: ok {rc=0} 01:29:54.045106 --- ParallelTerminationStrategy: PID 24161 died... 01:29:54.101425 run pcap-recorder_any(filters='host 10.42.42.6')(pid=24161): Terminated: ok {rc=0} 01:29:54.188337 bus /gobi_0: Setting Powered False 01:29:55.295075 bus /gobi_0: Setting Powered False 01:29:56.402770 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=24159): Process ended prematurely: osmo-stp_10.42.42.5(pid=24159) [trial-2397↪gprs:trx-lms+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=24159)]