Failed
gprs:trx-b200+mod-bts0-dynts-ipa.ping_idle_ping.py (from gprs_trx-b200+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=29952): Process ended prematurely: osmo-stp_10.42.42.5(pid=29952) [trial-2398↪gprs:trx-b200+mod-bts0-dynts-ipa↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=29952)]
Standard Output
---------------------------------------------- trial-2398 gprs:trx-b200+mod-bts0-dynts-ipa ping_idle_ping.py ---------------------------------------------- 02:32:44.178083 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 02:32:44.190109 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 02:32:44.356271 tst ping_idle_ping.py: using LAC 37935 02:32:44.482034 tst ping_idle_ping.py: using RAC 195 02:32:44.606260 tst ping_idle_ping.py: using CellId 37935 02:32:44.732336 tst ping_idle_ping.py: using BVCI 37936 02:32:44.756741 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 02:32:44.768149 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 02:32:44.779252 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 02:32:44.790580 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 02:32:44.802045 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 02:32:44.813575 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 02:32:44.825218 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 02:32:44.836781 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 02:32:45.123331 tst ping_idle_ping.py:24: start network... 02:32:45.256621 run osmo-hlr_10.42.42.2: Starting osmo-hlr 02:32:45.760328 run create_hlr_db(pid=29946): Launched 02:32:45.953493 bus /gobi_6: Setting Powered False 02:32:47.000312 run create_hlr_db(pid=29946): Terminated: ok {rc=0} 02:32:47.419164 run pcap-recorder_any(filters='host 10.42.42.2')(pid=29948): Launched 02:32:47.714259 run osmo-hlr_10.42.42.2(pid=29949): Launched 02:32:47.822473 run osmo-stp_10.42.42.5: Starting osmo-stp 02:32:48.332254 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=29951): Launched 02:32:48.626448 run osmo-stp_10.42.42.5(pid=29952): Launched 02:32:48.733472 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 02:32:49.245130 run pcap-recorder_any(filters='host 10.42.42.6')(pid=29954): Launched 02:32:49.349959 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 02:32:49.605701 run patchelf(pid=29955): Launched 02:32:49.778168 run osmo-stp_10.42.42.5(pid=29952): ERR: Terminated: ERROR {rc=1} [trial-2398↪gprs:trx-b200+mod-bts0-dynts-ipa↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=29952)] 02:32:49.904095 run osmo-stp_10.42.42.5(pid=29952): stdout: | (launched: 2022-12-14_02:32:48.482285) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 02:32:50.030202 run osmo-stp_10.42.42.5(pid=29952): stderr: | �[0;m�[38;5;43m20221214023248651 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214023248651 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214023248651 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214023248652 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214023248652 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214023248652 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214023248652 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 02:32:50.152265 run osmo-stp_10.42.42.5(pid=29952): stdout: | (launched: 2022-12-14_02:32:48.482285) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 02:32:50.273308 run osmo-stp_10.42.42.5(pid=29952): stderr: | �[0;m�[38;5;43m20221214023248651 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214023248651 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214023248651 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214023248652 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214023248652 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214023248652 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214023248652 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 02:32:50.414828 run patchelf(pid=29955): Terminating (SIGINT) 02:32:50.582830 run patchelf(pid=29955): Terminated: ok {rc=0} 02:32:50.613229 tst ping_idle_ping.py:27: ERR: Error: osmo-stp_10.42.42.5(pid=29952): Process ended prematurely: osmo-stp_10.42.42.5(pid=29952) [trial-2398↪gprs:trx-b200+mod-bts0-dynts-ipa↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=29952)] [trial-2398↪gprs:trx-b200+mod-bts0-dynts-ipa↪ping_idle_ping.py:27] 02:32:50.621757 tst ping_idle_ping.py:27: Test FAILED (6.4 sec) 02:32:50.681503 run osmo-hlr_10.42.42.2(pid=29949): ERR: Terminated: ERROR {rc=237} [trial-2398↪gprs:trx-b200+mod-bts0-dynts-ipa↪ping_idle_ping.py↪ping_idle_ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=29949)] 02:32:50.730725 run osmo-hlr_10.42.42.2(pid=29949): stdout: | (launched: 2022-12-14_02:32:47.568584) 02:32:50.780138 run osmo-hlr_10.42.42.2(pid=29949): stderr: | �[0;m�[1;31m20221214023247743 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214023247743 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214023247743 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214023247743 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214023247743 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214023247743 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214023247755 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2398/run.2022-12-14_02-07-46/gprs:trx-b200+mod-bts0-dynts-ipa/ping_idle_ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214023247766 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214023247766 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214023247766 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 02:32:50.822336 run pcap-recorder_any(filters='host 10.42.42.2')(pid=29948): Terminating (SIGTERM) 02:32:50.862086 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=29951): Terminating (SIGTERM) 02:32:50.901642 run pcap-recorder_any(filters='host 10.42.42.6')(pid=29954): Terminating (SIGTERM) 02:32:50.910793 --- ParallelTerminationStrategy: PID 29948 died... 02:32:50.963970 run pcap-recorder_any(filters='host 10.42.42.2')(pid=29948): Terminated: ok {rc=0} 02:32:50.973658 --- ParallelTerminationStrategy: PID 29951 died... 02:32:51.027164 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=29951): Terminated: ok {rc=0} 02:32:51.036678 --- ParallelTerminationStrategy: PID 29954 died... 02:32:51.089219 run pcap-recorder_any(filters='host 10.42.42.6')(pid=29954): Terminated: ok {rc=0} 02:32:51.176647 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping_idle_ping.py", line 27, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=29952): Process ended prematurely: osmo-stp_10.42.42.5(pid=29952) [trial-2398↪gprs:trx-b200+mod-bts0-dynts-ipa↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=29952)]