Failed
gprs:trx-umtrx+mod-bts0-dynts-ipa.cs_paging_gprs_active.py (from gprs_trx-umtrx+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=31363): Process ended prematurely: osmo-stp_10.42.42.5(pid=31363) [trial-2398↪gprs:trx-umtrx+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=31363)]
Standard Output
---------------------------------------------- trial-2398 gprs:trx-umtrx+mod-bts0-dynts-ipa cs_paging_gprs_active.py ---------------------------------------------- 02:48:55.929538 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 02:48:55.940670 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 02:48:56.106301 tst cs_paging_gprs_active.py: using LAC 38022 02:48:56.235344 tst cs_paging_gprs_active.py: using RAC 27 02:48:56.353230 tst cs_paging_gprs_active.py: using CellId 38022 02:48:56.471005 tst cs_paging_gprs_active.py: using BVCI 38023 02:48:56.494415 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 02:48:56.505265 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 02:48:56.515817 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 02:48:56.526458 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 02:48:56.537315 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 02:48:56.548018 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 02:48:56.558915 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 02:48:56.569664 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 02:48:56.580615 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 02:48:56.703033 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 02:48:56.981353 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 02:48:57.107163 run iperf3-srv_10.42.42.10: Starting iperf3-srv 02:48:57.419893 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=31353): Launched 02:48:57.680315 run iperf3-srv_10.42.42.10(pid=31354): Launched 02:48:57.864212 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 02:48:57.989609 run iperf3-srv_10.42.42.10: Starting iperf3-srv 02:48:58.303071 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=31355): Launched 02:48:58.562732 run iperf3-srv_10.42.42.10(pid=31356): Launched 02:48:58.746611 tst cs_paging_gprs_active.py:38: start network... 02:48:58.871712 run osmo-hlr_10.42.42.2: Starting osmo-hlr 02:48:59.355657 run create_hlr_db(pid=31357): Launched 02:48:59.528873 bus /gobi_6: Setting Powered False 02:49:00.550981 run create_hlr_db(pid=31357): Terminated: ok {rc=0} 02:49:01.017875 run pcap-recorder_any(filters='host 10.42.42.2')(pid=31359): Launched 02:49:01.406885 run osmo-hlr_10.42.42.2(pid=31360): Launched 02:49:01.622769 run osmo-stp_10.42.42.5: Starting osmo-stp 02:49:02.273716 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=31362): Launched 02:49:02.577732 run osmo-stp_10.42.42.5(pid=31363): Launched 02:49:02.687585 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 02:49:03.214072 run pcap-recorder_any(filters='host 10.42.42.6')(pid=31365): Launched 02:49:03.321516 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 02:49:03.592089 run patchelf(pid=31366): Launched 02:49:03.769882 run osmo-stp_10.42.42.5(pid=31363): ERR: Terminated: ERROR {rc=1} [trial-2398↪gprs:trx-umtrx+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=31363)] 02:49:03.899730 run osmo-stp_10.42.42.5(pid=31363): stdout: | (launched: 2022-12-14_02:49:02.428882) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 02:49:04.029909 run osmo-stp_10.42.42.5(pid=31363): stderr: | �[0;m�[38;5;43m20221214024902599 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214024902599 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214024902600 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214024902600 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214024902602 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214024902602 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214024902602 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 02:49:04.155364 run osmo-stp_10.42.42.5(pid=31363): stdout: | (launched: 2022-12-14_02:49:02.428882) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 02:49:04.280427 run osmo-stp_10.42.42.5(pid=31363): stderr: | �[0;m�[38;5;43m20221214024902599 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214024902599 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214024902600 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214024902600 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214024902602 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214024902602 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214024902602 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 02:49:04.425996 run patchelf(pid=31366): Terminating (SIGINT) 02:49:04.597610 run patchelf(pid=31366): Terminated: ok {rc=0} 02:49:04.629174 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=31363): Process ended prematurely: osmo-stp_10.42.42.5(pid=31363) [trial-2398↪gprs:trx-umtrx+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=31363)] [trial-2398↪gprs:trx-umtrx+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38] 02:49:04.638313 tst cs_paging_gprs_active.py:38: Test FAILED (8.7 sec) 02:49:04.698150 run osmo-hlr_10.42.42.2(pid=31360): ERR: Terminated: ERROR {rc=237} [trial-2398↪gprs:trx-umtrx+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=31360)] 02:49:04.746741 run osmo-hlr_10.42.42.2(pid=31360): stdout: | (launched: 2022-12-14_02:49:01.191495) 02:49:04.796099 run osmo-hlr_10.42.42.2(pid=31360): stderr: | �[0;m�[1;31m20221214024901494 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214024901494 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214024901494 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214024901494 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214024901494 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214024901494 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214024901513 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2398/run.2022-12-14_02-07-46/gprs:trx-umtrx+mod-bts0-dynts-ipa/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214024901526 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214024901526 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214024901526 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 02:49:04.838352 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=31353): Terminating (SIGTERM) 02:49:04.877925 run iperf3-srv_10.42.42.10(pid=31354): Terminating (SIGTERM) 02:49:04.917489 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=31355): Terminating (SIGTERM) 02:49:04.957030 run iperf3-srv_10.42.42.10(pid=31356): Terminating (SIGTERM) 02:49:04.996569 run pcap-recorder_any(filters='host 10.42.42.2')(pid=31359): Terminating (SIGTERM) 02:49:05.036213 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=31362): Terminating (SIGTERM) 02:49:05.075892 run pcap-recorder_any(filters='host 10.42.42.6')(pid=31365): Terminating (SIGTERM) 02:49:05.085269 --- ParallelTerminationStrategy: PID 31353 died... 02:49:05.138498 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=31353): Terminated: ok {rc=0} 02:49:05.148246 --- ParallelTerminationStrategy: PID 31354 died... 02:49:05.201106 run iperf3-srv_10.42.42.10(pid=31354): Terminated {rc=256} 02:49:05.210759 --- ParallelTerminationStrategy: PID 31355 died... 02:49:05.263357 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=31355): Terminated: ok {rc=0} 02:49:05.273056 --- ParallelTerminationStrategy: PID 31356 died... 02:49:05.325642 run iperf3-srv_10.42.42.10(pid=31356): Terminated {rc=256} 02:49:05.335582 --- ParallelTerminationStrategy: PID 31359 died... 02:49:05.388643 run pcap-recorder_any(filters='host 10.42.42.2')(pid=31359): Terminated: ok {rc=0} 02:49:05.398374 --- ParallelTerminationStrategy: PID 31362 died... 02:49:05.451155 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=31362): Terminated: ok {rc=0} 02:49:05.460751 --- ParallelTerminationStrategy: PID 31365 died... 02:49:05.513289 run pcap-recorder_any(filters='host 10.42.42.6')(pid=31365): Terminated: ok {rc=0} 02:49:05.601029 bus /gobi_0: Setting Powered False 02:49:06.702823 bus /gobi_0: Setting Powered False 02:49:07.813215 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=31363): Process ended prematurely: osmo-stp_10.42.42.5(pid=31363) [trial-2398↪gprs:trx-umtrx+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=31363)]