Failed
gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend.cs_paging_gprs_active.py (from gprs_nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend)
Stacktrace
osmo-stp_10.42.42.5(pid=2255): Process ended prematurely: osmo-stp_10.42.42.5(pid=2255) [trial-2398↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=2255)]
Standard Output
---------------------------------------------- trial-2398 gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend cs_paging_gprs_active.py ---------------------------------------------- 03:20:00.733279 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 03:20:00.744611 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x bts (candidates: 1) 03:20:00.899290 tst cs_paging_gprs_active.py: using LAC 38187 03:20:01.031345 tst cs_paging_gprs_active.py: using RAC 192 03:20:01.208225 tst cs_paging_gprs_active.py: using CellId 38187 03:20:01.333782 tst cs_paging_gprs_active.py: using BVCI 38188 03:20:01.358149 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 03:20:01.369930 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 03:20:01.381435 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 03:20:01.393106 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 03:20:01.404793 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 03:20:01.418737 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 03:20:01.430939 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 03:20:01.442788 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 03:20:01.455112 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 03:20:01.576601 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 03:20:01.929425 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 03:20:02.060651 run iperf3-srv_10.42.42.10: Starting iperf3-srv 03:20:02.447210 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=2245): Launched 03:20:02.723581 run iperf3-srv_10.42.42.10(pid=2246): Launched 03:20:02.920522 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 03:20:03.054950 run iperf3-srv_10.42.42.10: Starting iperf3-srv 03:20:03.387150 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=2247): Launched 03:20:03.662778 run iperf3-srv_10.42.42.10(pid=2248): Launched 03:20:03.859268 tst cs_paging_gprs_active.py:38: start network... 03:20:03.992894 run osmo-hlr_10.42.42.2: Starting osmo-hlr 03:20:04.500813 run create_hlr_db(pid=2249): Launched 03:20:04.686903 bus /gobi_6: Setting Powered False 03:20:05.710138 run create_hlr_db(pid=2249): Terminated: ok {rc=0} 03:20:06.136903 run pcap-recorder_any(filters='host 10.42.42.2')(pid=2251): Launched 03:20:06.460020 run osmo-hlr_10.42.42.2(pid=2252): Launched 03:20:06.581015 run osmo-stp_10.42.42.5: Starting osmo-stp 03:20:07.122280 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=2254): Launched 03:20:07.445472 run osmo-stp_10.42.42.5(pid=2255): Launched 03:20:07.563103 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 03:20:08.127055 run pcap-recorder_any(filters='host 10.42.42.6')(pid=2257): Launched 03:20:08.242087 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 03:20:08.522527 run patchelf(pid=2258): Launched 03:20:08.710929 run osmo-stp_10.42.42.5(pid=2255): ERR: Terminated: ERROR {rc=1} [trial-2398↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=2255)] 03:20:08.849044 run osmo-stp_10.42.42.5(pid=2255): stdout: | (launched: 2022-12-14_03:20:07.286059) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 03:20:08.987237 run osmo-stp_10.42.42.5(pid=2255): stderr: | �[0;m�[38;5;43m20221214032007475 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214032007475 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214032007475 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214032007476 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214032007476 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214032007476 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214032007476 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 03:20:09.121596 run osmo-stp_10.42.42.5(pid=2255): stdout: | (launched: 2022-12-14_03:20:07.286059) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 03:20:09.253936 run osmo-stp_10.42.42.5(pid=2255): stderr: | �[0;m�[38;5;43m20221214032007475 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214032007475 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214032007475 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214032007476 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214032007476 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214032007476 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214032007476 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 03:20:09.408654 run patchelf(pid=2258): Terminating (SIGINT) 03:20:09.591345 run patchelf(pid=2258): Terminated: ok {rc=0} 03:20:09.624645 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=2255): Process ended prematurely: osmo-stp_10.42.42.5(pid=2255) [trial-2398↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=2255)] [trial-2398↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38] 03:20:09.634645 tst cs_paging_gprs_active.py:38: Test FAILED (8.9 sec) 03:20:09.698604 run osmo-hlr_10.42.42.2(pid=2252): ERR: Terminated: ERROR {rc=237} [trial-2398↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=2252)] 03:20:09.750518 run osmo-hlr_10.42.42.2(pid=2252): stdout: | (launched: 2022-12-14_03:20:06.301114) 03:20:09.803252 run osmo-hlr_10.42.42.2(pid=2252): stderr: | �[0;m�[1;31m20221214032006502 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214032006502 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214032006502 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214032006502 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214032006502 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214032006502 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214032006514 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2398/run.2022-12-14_02-07-46/gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214032006524 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214032006524 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214032006524 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 03:20:09.848122 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=2245): Terminating (SIGTERM) 03:20:09.890846 run iperf3-srv_10.42.42.10(pid=2246): Terminating (SIGTERM) 03:20:09.933658 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=2247): Terminating (SIGTERM) 03:20:09.975867 run iperf3-srv_10.42.42.10(pid=2248): Terminating (SIGTERM) 03:20:10.018463 run pcap-recorder_any(filters='host 10.42.42.2')(pid=2251): Terminating (SIGTERM) 03:20:10.060746 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=2254): Terminating (SIGTERM) 03:20:10.103322 run pcap-recorder_any(filters='host 10.42.42.6')(pid=2257): Terminating (SIGTERM) 03:20:10.112887 --- ParallelTerminationStrategy: PID 2245 died... 03:20:10.169608 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=2245): Terminated: ok {rc=0} 03:20:10.179506 --- ParallelTerminationStrategy: PID 2246 died... 03:20:10.236247 run iperf3-srv_10.42.42.10(pid=2246): Terminated {rc=256} 03:20:10.246198 --- ParallelTerminationStrategy: PID 2247 died... 03:20:10.302668 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=2247): Terminated: ok {rc=0} 03:20:10.312545 --- ParallelTerminationStrategy: PID 2248 died... 03:20:10.368645 run iperf3-srv_10.42.42.10(pid=2248): Terminated {rc=256} 03:20:10.378658 --- ParallelTerminationStrategy: PID 2251 died... 03:20:10.434950 run pcap-recorder_any(filters='host 10.42.42.2')(pid=2251): Terminated: ok {rc=0} 03:20:10.444905 --- ParallelTerminationStrategy: PID 2254 died... 03:20:10.501010 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=2254): Terminated: ok {rc=0} 03:20:10.510967 --- ParallelTerminationStrategy: PID 2257 died... 03:20:10.567990 run pcap-recorder_any(filters='host 10.42.42.6')(pid=2257): Terminated: ok {rc=0} 03:20:10.657251 bus /gobi_0: Setting Powered False 03:20:11.766580 bus /gobi_0: Setting Powered False 03:20:12.875768 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=2255): Process ended prematurely: osmo-stp_10.42.42.5(pid=2255) [trial-2398↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=2255)]