Failed
gprs:sysmo+mod-bts0-dynts-osmo.cs_paging_gprs_active.py (from gprs_sysmo+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=28541): Process ended prematurely: osmo-stp_10.42.42.5(pid=28541) [trial-2398↪gprs:sysmo+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28541)]
Standard Output
---------------------------------------------- trial-2398 gprs:sysmo+mod-bts0-dynts-osmo cs_paging_gprs_active.py ---------------------------------------------- 02:16:31.738188 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 02:16:31.753439 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 02:16:31.912798 tst cs_paging_gprs_active.py: using LAC 37848 02:16:32.070419 tst cs_paging_gprs_active.py: using RAC 108 02:16:32.229728 tst cs_paging_gprs_active.py: using CellId 37848 02:16:32.370115 tst cs_paging_gprs_active.py: using BVCI 37849 02:16:32.395515 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 02:16:32.406799 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 02:16:32.417769 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 02:16:32.428761 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 02:16:32.440653 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 02:16:32.452390 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 02:16:32.464362 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 02:16:32.476009 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 02:16:32.487970 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 02:16:32.608693 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 02:16:32.886064 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 02:16:33.011715 run iperf3-srv_10.42.42.10: Starting iperf3-srv 02:16:33.324688 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28531): Launched 02:16:33.584377 run iperf3-srv_10.42.42.10(pid=28532): Launched 02:16:33.767689 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 02:16:33.892679 run iperf3-srv_10.42.42.10: Starting iperf3-srv 02:16:34.204411 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28533): Launched 02:16:34.464247 run iperf3-srv_10.42.42.10(pid=28534): Launched 02:16:34.647413 tst cs_paging_gprs_active.py:38: start network... 02:16:34.773976 run osmo-hlr_10.42.42.2: Starting osmo-hlr 02:16:35.256850 run create_hlr_db(pid=28535): Launched 02:16:35.430095 bus /gobi_6: Setting Powered False 02:16:36.458637 run create_hlr_db(pid=28535): Terminated: ok {rc=0} 02:16:36.863809 run pcap-recorder_any(filters='host 10.42.42.2')(pid=28537): Launched 02:16:37.166194 run osmo-hlr_10.42.42.2(pid=28538): Launched 02:16:37.285561 run osmo-stp_10.42.42.5: Starting osmo-stp 02:16:37.815599 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=28540): Launched 02:16:38.117297 run osmo-stp_10.42.42.5(pid=28541): Launched 02:16:38.226622 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 02:16:38.752084 run pcap-recorder_any(filters='host 10.42.42.6')(pid=28543): Launched 02:16:38.859471 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 02:16:39.122761 run patchelf(pid=28544): Launched 02:16:39.299390 run osmo-stp_10.42.42.5(pid=28541): ERR: Terminated: ERROR {rc=1} [trial-2398↪gprs:sysmo+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28541)] 02:16:39.428812 run osmo-stp_10.42.42.5(pid=28541): stdout: | (launched: 2022-12-14_02:16:37.968304) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 02:16:39.558538 run osmo-stp_10.42.42.5(pid=28541): stderr: | �[0;m�[38;5;43m20221214021638139 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214021638140 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214021638140 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214021638140 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214021638141 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214021638141 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214021638141 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 02:16:39.683098 run osmo-stp_10.42.42.5(pid=28541): stdout: | (launched: 2022-12-14_02:16:37.968304) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 02:16:39.807017 run osmo-stp_10.42.42.5(pid=28541): stderr: | �[0;m�[38;5;43m20221214021638139 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214021638140 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214021638140 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214021638140 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214021638141 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214021638141 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214021638141 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 02:16:39.952070 run patchelf(pid=28544): Terminating (SIGINT) 02:16:40.123450 run patchelf(pid=28544): Terminated: ok {rc=0} 02:16:40.154976 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=28541): Process ended prematurely: osmo-stp_10.42.42.5(pid=28541) [trial-2398↪gprs:sysmo+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28541)] [trial-2398↪gprs:sysmo+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38] 02:16:40.164257 tst cs_paging_gprs_active.py:38: Test FAILED (8.5 sec) 02:16:40.223782 run osmo-hlr_10.42.42.2(pid=28538): ERR: Terminated: ERROR {rc=237} [trial-2398↪gprs:sysmo+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=28538)] 02:16:40.272612 run osmo-hlr_10.42.42.2(pid=28538): stdout: | (launched: 2022-12-14_02:16:37.017275) 02:16:40.321781 run osmo-hlr_10.42.42.2(pid=28538): stderr: | �[0;m�[1;31m20221214021637194 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214021637194 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214021637194 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214021637194 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214021637194 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214021637194 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214021637212 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2398/run.2022-12-14_02-07-46/gprs:sysmo+mod-bts0-dynts-osmo/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214021637221 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214021637221 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214021637221 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 02:16:40.363820 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28531): Terminating (SIGTERM) 02:16:40.403473 run iperf3-srv_10.42.42.10(pid=28532): Terminating (SIGTERM) 02:16:40.443068 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28533): Terminating (SIGTERM) 02:16:40.482501 run iperf3-srv_10.42.42.10(pid=28534): Terminating (SIGTERM) 02:16:40.522073 run pcap-recorder_any(filters='host 10.42.42.2')(pid=28537): Terminating (SIGTERM) 02:16:40.561593 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=28540): Terminating (SIGTERM) 02:16:40.600820 run pcap-recorder_any(filters='host 10.42.42.6')(pid=28543): Terminating (SIGTERM) 02:16:40.610038 --- ParallelTerminationStrategy: PID 28531 died... 02:16:40.663298 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28531): Terminated: ok {rc=0} 02:16:40.672843 --- ParallelTerminationStrategy: PID 28532 died... 02:16:40.725210 run iperf3-srv_10.42.42.10(pid=28532): Terminated {rc=256} 02:16:40.734666 --- ParallelTerminationStrategy: PID 28533 died... 02:16:40.787877 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28533): Terminated: ok {rc=0} 02:16:40.797452 --- ParallelTerminationStrategy: PID 28534 died... 02:16:40.849960 run iperf3-srv_10.42.42.10(pid=28534): Terminated {rc=256} 02:16:40.859563 --- ParallelTerminationStrategy: PID 28537 died... 02:16:40.912149 run pcap-recorder_any(filters='host 10.42.42.2')(pid=28537): Terminated: ok {rc=0} 02:16:40.921672 --- ParallelTerminationStrategy: PID 28540 died... 02:16:40.974041 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=28540): Terminated: ok {rc=0} 02:16:40.983481 --- ParallelTerminationStrategy: PID 28543 died... 02:16:41.036142 run pcap-recorder_any(filters='host 10.42.42.6')(pid=28543): Terminated: ok {rc=0} 02:16:41.123940 bus /gobi_0: Setting Powered False 02:16:42.228347 bus /gobi_0: Setting Powered False 02:16:43.333607 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=28541): Process ended prematurely: osmo-stp_10.42.42.5(pid=28541) [trial-2398↪gprs:sysmo+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28541)]