Failed
gprs:trx-b200+mod-bts0-dynts-ipa.cs_paging_gprs_active.py (from gprs_trx-b200+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=29901): Process ended prematurely: osmo-stp_10.42.42.5(pid=29901) [trial-2398↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=29901)]
Standard Output
---------------------------------------------- trial-2398 gprs:trx-b200+mod-bts0-dynts-ipa cs_paging_gprs_active.py ---------------------------------------------- 02:31:53.724375 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 02:31:53.735655 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 02:31:53.897163 tst cs_paging_gprs_active.py: using LAC 37931 02:31:54.016738 tst cs_paging_gprs_active.py: using RAC 191 02:31:54.133682 tst cs_paging_gprs_active.py: using CellId 37931 02:31:54.249743 tst cs_paging_gprs_active.py: using BVCI 37932 02:31:54.272726 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 02:31:54.283540 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 02:31:54.294165 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 02:31:54.304562 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 02:31:54.315032 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 02:31:54.325557 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 02:31:54.336061 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 02:31:54.346463 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 02:31:54.357060 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 02:31:54.471622 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 02:31:54.763215 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 02:31:54.898136 run iperf3-srv_10.42.42.10: Starting iperf3-srv 02:31:55.230438 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=29891): Launched 02:31:55.506293 run iperf3-srv_10.42.42.10(pid=29892): Launched 02:31:55.703254 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 02:31:55.837833 run iperf3-srv_10.42.42.10: Starting iperf3-srv 02:31:56.169934 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=29893): Launched 02:31:56.446320 run iperf3-srv_10.42.42.10(pid=29894): Launched 02:31:56.644062 tst cs_paging_gprs_active.py:38: start network... 02:31:56.778560 run osmo-hlr_10.42.42.2: Starting osmo-hlr 02:31:57.284475 run create_hlr_db(pid=29895): Launched 02:31:57.470336 bus /gobi_6: Setting Powered False 02:31:58.491839 run create_hlr_db(pid=29895): Terminated: ok {rc=0} 02:31:58.892806 run pcap-recorder_any(filters='host 10.42.42.2')(pid=29897): Launched 02:31:59.192825 run osmo-hlr_10.42.42.2(pid=29898): Launched 02:31:59.306847 run osmo-stp_10.42.42.5: Starting osmo-stp 02:31:59.826231 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=29900): Launched 02:32:00.126653 run osmo-stp_10.42.42.5(pid=29901): Launched 02:32:00.236365 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 02:32:00.757450 run pcap-recorder_any(filters='host 10.42.42.6')(pid=29903): Launched 02:32:00.865773 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 02:32:01.165467 run patchelf(pid=29904): Launched 02:32:01.343054 run osmo-stp_10.42.42.5(pid=29901): ERR: Terminated: ERROR {rc=1} [trial-2398↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=29901)] 02:32:01.473326 run osmo-stp_10.42.42.5(pid=29901): stdout: | (launched: 2022-12-14_02:31:59.978133) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 02:32:01.604046 run osmo-stp_10.42.42.5(pid=29901): stderr: | �[0;m�[38;5;43m20221214023200149 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214023200149 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214023200149 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214023200149 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214023200150 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214023200150 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214023200150 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 02:32:01.730333 run osmo-stp_10.42.42.5(pid=29901): stdout: | (launched: 2022-12-14_02:31:59.978133) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 02:32:01.855271 run osmo-stp_10.42.42.5(pid=29901): stderr: | �[0;m�[38;5;43m20221214023200149 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214023200149 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214023200149 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214023200149 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214023200150 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214023200150 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214023200150 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 02:32:02.001643 run patchelf(pid=29904): Terminating (SIGINT) 02:32:02.191820 run patchelf(pid=29904): Terminated: ok {rc=0} 02:32:02.226401 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=29901): Process ended prematurely: osmo-stp_10.42.42.5(pid=29901) [trial-2398↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=29901)] [trial-2398↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38] 02:32:02.237077 tst cs_paging_gprs_active.py:38: Test FAILED (8.5 sec) 02:32:02.302283 run osmo-hlr_10.42.42.2(pid=29898): ERR: Terminated: ERROR {rc=237} [trial-2398↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=29898)] 02:32:02.355032 run osmo-hlr_10.42.42.2(pid=29898): stdout: | (launched: 2022-12-14_02:31:59.045615) 02:32:02.409161 run osmo-hlr_10.42.42.2(pid=29898): stderr: | �[0;m�[1;31m20221214023159222 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214023159222 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214023159222 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214023159222 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214023159222 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214023159222 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214023159234 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2398/run.2022-12-14_02-07-46/gprs:trx-b200+mod-bts0-dynts-ipa/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214023159243 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214023159243 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214023159243 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 02:32:02.454796 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=29891): Terminating (SIGTERM) 02:32:02.497591 run iperf3-srv_10.42.42.10(pid=29892): Terminating (SIGTERM) 02:32:02.540388 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=29893): Terminating (SIGTERM) 02:32:02.583384 run iperf3-srv_10.42.42.10(pid=29894): Terminating (SIGTERM) 02:32:02.626328 run pcap-recorder_any(filters='host 10.42.42.2')(pid=29897): Terminating (SIGTERM) 02:32:02.669396 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=29900): Terminating (SIGTERM) 02:32:02.712195 run pcap-recorder_any(filters='host 10.42.42.6')(pid=29903): Terminating (SIGTERM) 02:32:02.721886 --- ParallelTerminationStrategy: PID 29891 died... 02:32:02.779632 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=29891): Terminated: ok {rc=0} 02:32:02.789696 --- ParallelTerminationStrategy: PID 29892 died... 02:32:02.846944 run iperf3-srv_10.42.42.10(pid=29892): Terminated {rc=256} 02:32:02.856868 --- ParallelTerminationStrategy: PID 29893 died... 02:32:02.914678 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=29893): Terminated: ok {rc=0} 02:32:02.925004 --- ParallelTerminationStrategy: PID 29894 died... 02:32:02.982260 run iperf3-srv_10.42.42.10(pid=29894): Terminated {rc=256} 02:32:02.992209 --- ParallelTerminationStrategy: PID 29897 died... 02:32:03.049471 run pcap-recorder_any(filters='host 10.42.42.2')(pid=29897): Terminated: ok {rc=0} 02:32:03.059446 --- ParallelTerminationStrategy: PID 29900 died... 02:32:03.116721 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=29900): Terminated: ok {rc=0} 02:32:03.126787 --- ParallelTerminationStrategy: PID 29903 died... 02:32:03.184320 run pcap-recorder_any(filters='host 10.42.42.6')(pid=29903): Terminated: ok {rc=0} 02:32:03.272617 bus /gobi_0: Setting Powered False 02:32:04.374597 bus /gobi_0: Setting Powered False 02:32:05.483453 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=29901): Process ended prematurely: osmo-stp_10.42.42.5(pid=29901) [trial-2398↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=29901)]