Failed
gprs:trx-sysmocell5000.cs_paging_gprs_active.py (from gprs_trx-sysmocell5000)
Stacktrace
osmo-stp_10.42.42.5(pid=30377): Process ended prematurely: osmo-stp_10.42.42.5(pid=30377) [trial-2398↪gprs:trx-sysmocell5000↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=30377)]
Standard Output
---------------------------------------------- trial-2398 gprs:trx-sysmocell5000 cs_paging_gprs_active.py ---------------------------------------------- 02:38:41.693965 tst gprs:trx-sysmocell5000: Using 1 x ip_address (candidates: 9) 02:38:41.704635 tst gprs:trx-sysmocell5000: Using 1 x bts (candidates: 1) 02:38:41.838444 tst cs_paging_gprs_active.py: using LAC 37968 02:38:41.953996 tst cs_paging_gprs_active.py: using RAC 228 02:38:42.074423 tst cs_paging_gprs_active.py: using CellId 37968 02:38:42.189984 tst cs_paging_gprs_active.py: using BVCI 37969 02:38:42.212653 tst gprs:trx-sysmocell5000: Using 1 x ip_address (candidates: 9) 02:38:42.223223 tst gprs:trx-sysmocell5000: Using 1 x ip_address (candidates: 9) 02:38:42.233610 tst gprs:trx-sysmocell5000: Using 1 x ip_address (candidates: 9) 02:38:42.243907 tst gprs:trx-sysmocell5000: Using 1 x ip_address (candidates: 9) 02:38:42.254663 tst gprs:trx-sysmocell5000: Using 1 x ip_address (candidates: 9) 02:38:42.265731 tst gprs:trx-sysmocell5000: Using 1 x ip_address (candidates: 9) 02:38:42.276247 tst gprs:trx-sysmocell5000: Using 1 x ip_address (candidates: 9) 02:38:42.286768 tst gprs:trx-sysmocell5000: Using 1 x ip_address (candidates: 9) 02:38:42.297228 tst gprs:trx-sysmocell5000: Using 1 x modem (candidates: 4) 02:38:42.417817 tst gprs:trx-sysmocell5000: Using 1 x modem (candidates: 4) 02:38:42.696132 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 02:38:42.820849 run iperf3-srv_10.42.42.10: Starting iperf3-srv 02:38:43.129512 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=30367): Launched 02:38:43.386944 run iperf3-srv_10.42.42.10(pid=30368): Launched 02:38:43.568692 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 02:38:43.692805 run iperf3-srv_10.42.42.10: Starting iperf3-srv 02:38:44.000415 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=30369): Launched 02:38:44.256282 run iperf3-srv_10.42.42.10(pid=30370): Launched 02:38:44.437996 tst cs_paging_gprs_active.py:38: start network... 02:38:44.561655 run osmo-hlr_10.42.42.2: Starting osmo-hlr 02:38:45.040604 run create_hlr_db(pid=30371): Launched 02:38:45.212001 bus /sierra_2: Setting Powered False 02:38:46.250136 run create_hlr_db(pid=30371): Terminated: ok {rc=0} 02:38:46.702457 run pcap-recorder_any(filters='host 10.42.42.2')(pid=30373): Launched 02:38:47.090244 run osmo-hlr_10.42.42.2(pid=30374): Launched 02:38:47.218644 run osmo-stp_10.42.42.5: Starting osmo-stp 02:38:47.737668 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=30376): Launched 02:38:48.035876 run osmo-stp_10.42.42.5(pid=30377): Launched 02:38:48.145258 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 02:38:48.665636 run pcap-recorder_any(filters='host 10.42.42.6')(pid=30379): Launched 02:38:48.771994 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 02:38:49.031709 run patchelf(pid=30380): Launched 02:38:49.206413 run osmo-stp_10.42.42.5(pid=30377): ERR: Terminated: ERROR {rc=1} [trial-2398↪gprs:trx-sysmocell5000↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=30377)] 02:38:49.334195 run osmo-stp_10.42.42.5(pid=30377): stdout: | (launched: 2022-12-14_02:38:47.889122) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 02:38:49.462660 run osmo-stp_10.42.42.5(pid=30377): stderr: | �[0;m�[38;5;43m20221214023848060 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214023848060 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214023848061 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214023848061 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214023848062 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214023848062 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214023848062 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 02:38:49.586097 run osmo-stp_10.42.42.5(pid=30377): stdout: | (launched: 2022-12-14_02:38:47.889122) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 02:38:49.708321 run osmo-stp_10.42.42.5(pid=30377): stderr: | �[0;m�[38;5;43m20221214023848060 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214023848060 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214023848061 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214023848061 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214023848062 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214023848062 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214023848062 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 02:38:49.851306 run patchelf(pid=30380): Terminating (SIGINT) 02:38:50.019577 run patchelf(pid=30380): Terminated: ok {rc=0} 02:38:50.050697 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=30377): Process ended prematurely: osmo-stp_10.42.42.5(pid=30377) [trial-2398↪gprs:trx-sysmocell5000↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=30377)] [trial-2398↪gprs:trx-sysmocell5000↪cs_paging_gprs_active.py:38] 02:38:50.059858 tst cs_paging_gprs_active.py:38: Test FAILED (8.4 sec) 02:38:50.119297 run osmo-hlr_10.42.42.2(pid=30374): ERR: Terminated: ERROR {rc=237} [trial-2398↪gprs:trx-sysmocell5000↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=30374)] 02:38:50.167851 run osmo-hlr_10.42.42.2(pid=30374): stdout: | (launched: 2022-12-14_02:38:46.870200) 02:38:50.216972 run osmo-hlr_10.42.42.2(pid=30374): stderr: | �[0;m�[1;31m20221214023847146 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214023847146 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214023847146 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214023847146 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214023847146 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214023847146 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214023847166 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2398/run.2022-12-14_02-07-46/gprs:trx-sysmocell5000/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214023847179 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214023847179 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214023847179 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 02:38:50.258894 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=30367): Terminating (SIGTERM) 02:38:50.298333 run iperf3-srv_10.42.42.10(pid=30368): Terminating (SIGTERM) 02:38:50.337780 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=30369): Terminating (SIGTERM) 02:38:50.376987 run iperf3-srv_10.42.42.10(pid=30370): Terminating (SIGTERM) 02:38:50.416299 run pcap-recorder_any(filters='host 10.42.42.2')(pid=30373): Terminating (SIGTERM) 02:38:50.455491 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=30376): Terminating (SIGTERM) 02:38:50.494831 run pcap-recorder_any(filters='host 10.42.42.6')(pid=30379): Terminating (SIGTERM) 02:38:50.503843 --- ParallelTerminationStrategy: PID 30367 died... 02:38:50.556466 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=30367): Terminated: ok {rc=0} 02:38:50.565896 --- ParallelTerminationStrategy: PID 30368 died... 02:38:50.618016 run iperf3-srv_10.42.42.10(pid=30368): Terminated {rc=256} 02:38:50.627366 --- ParallelTerminationStrategy: PID 30369 died... 02:38:50.679708 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=30369): Terminated: ok {rc=0} 02:38:50.689094 --- ParallelTerminationStrategy: PID 30370 died... 02:38:50.741005 run iperf3-srv_10.42.42.10(pid=30370): Terminated {rc=256} 02:38:50.750324 --- ParallelTerminationStrategy: PID 30373 died... 02:38:50.802694 run pcap-recorder_any(filters='host 10.42.42.2')(pid=30373): Terminated: ok {rc=0} 02:38:50.812077 --- ParallelTerminationStrategy: PID 30376 died... 02:38:50.864639 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=30376): Terminated: ok {rc=0} 02:38:50.874180 --- ParallelTerminationStrategy: PID 30379 died... 02:38:50.926844 run pcap-recorder_any(filters='host 10.42.42.6')(pid=30379): Terminated: ok {rc=0} 02:38:51.009929 bus /gobi_0: Setting Powered False 02:38:52.111470 bus /gobi_0: Setting Powered False 02:38:53.222583 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=30377): Process ended prematurely: osmo-stp_10.42.42.5(pid=30377) [trial-2398↪gprs:trx-sysmocell5000↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=30377)]