Failed
gprs:nanobts+band-1900.cs_paging_gprs_active.py (from gprs_nanobts+band-1900)
Stacktrace
osmo-stp_10.42.42.5(pid=9337): Process ended prematurely: osmo-stp_10.42.42.5(pid=9337) [trial-2399↪gprs:nanobts+band-1900↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9337)]
Standard Output
---------------------------------------------- trial-2399 gprs:nanobts+band-1900 cs_paging_gprs_active.py ---------------------------------------------- 04:38:16.486533 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 04:38:16.498073 tst gprs:nanobts+band-1900: Using 1 x bts (candidates: 1) 04:38:16.634259 tst cs_paging_gprs_active.py: using LAC 38600 04:38:16.755907 tst cs_paging_gprs_active.py: using RAC 95 04:38:16.879228 tst cs_paging_gprs_active.py: using CellId 38600 04:38:17.000093 tst cs_paging_gprs_active.py: using BVCI 38601 04:38:17.023996 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 04:38:17.035397 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 04:38:17.046673 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 04:38:17.057960 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 04:38:17.069199 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 04:38:17.080135 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 04:38:17.091281 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 04:38:17.102342 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 04:38:17.113586 tst gprs:nanobts+band-1900: Using 1 x modem (candidates: 4) 04:38:17.233867 tst gprs:nanobts+band-1900: Using 1 x modem (candidates: 4) 04:38:17.511400 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 04:38:17.636720 run iperf3-srv_10.42.42.10: Starting iperf3-srv 04:38:17.949818 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=9327): Launched 04:38:18.210426 run iperf3-srv_10.42.42.10(pid=9328): Launched 04:38:18.393866 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 04:38:18.518843 run iperf3-srv_10.42.42.10: Starting iperf3-srv 04:38:18.831862 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=9329): Launched 04:38:19.093287 run iperf3-srv_10.42.42.10(pid=9330): Launched 04:38:19.276098 tst cs_paging_gprs_active.py:38: start network... 04:38:19.400780 run osmo-hlr_10.42.42.2: Starting osmo-hlr 04:38:19.889961 run create_hlr_db(pid=9331): Launched 04:38:20.062766 bus /sierra_2: Setting Powered False 04:38:21.085693 run create_hlr_db(pid=9331): Terminated: ok {rc=0} 04:38:21.514701 run pcap-recorder_any(filters='host 10.42.42.2')(pid=9333): Launched 04:38:21.840371 run osmo-hlr_10.42.42.2(pid=9334): Launched 04:38:21.960107 run osmo-stp_10.42.42.5: Starting osmo-stp 04:38:22.525920 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=9336): Launched 04:38:22.851659 run osmo-stp_10.42.42.5(pid=9337): Launched 04:38:22.969540 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 04:38:23.538199 run pcap-recorder_any(filters='host 10.42.42.6')(pid=9339): Launched 04:38:23.654347 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 04:38:23.939158 run patchelf(pid=9340): Launched 04:38:24.120855 run osmo-stp_10.42.42.5(pid=9337): ERR: Terminated: ERROR {rc=1} [trial-2399↪gprs:nanobts+band-1900↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9337)] 04:38:24.250989 run osmo-stp_10.42.42.5(pid=9337): stdout: | (launched: 2022-12-14_04:38:22.690633) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 04:38:24.381182 run osmo-stp_10.42.42.5(pid=9337): stderr: | �[0;m�[38;5;43m20221214043822883 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214043822883 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214043822883 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214043822883 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214043822884 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214043822884 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214043822884 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 04:38:24.506897 run osmo-stp_10.42.42.5(pid=9337): stdout: | (launched: 2022-12-14_04:38:22.690633) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 04:38:24.631526 run osmo-stp_10.42.42.5(pid=9337): stderr: | �[0;m�[38;5;43m20221214043822883 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214043822883 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214043822883 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214043822883 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214043822884 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214043822884 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214043822884 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 04:38:24.776433 run patchelf(pid=9340): Terminating (SIGINT) 04:38:24.947102 run patchelf(pid=9340): Terminated: ok {rc=0} 04:38:24.978511 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=9337): Process ended prematurely: osmo-stp_10.42.42.5(pid=9337) [trial-2399↪gprs:nanobts+band-1900↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9337)] [trial-2399↪gprs:nanobts+band-1900↪cs_paging_gprs_active.py:38] 04:38:24.987880 tst cs_paging_gprs_active.py:38: Test FAILED (8.5 sec) 04:38:25.048306 run osmo-hlr_10.42.42.2(pid=9334): ERR: Terminated: ERROR {rc=237} [trial-2399↪gprs:nanobts+band-1900↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=9334)] 04:38:25.097311 run osmo-hlr_10.42.42.2(pid=9334): stdout: | (launched: 2022-12-14_04:38:21.680481) 04:38:25.146843 run osmo-hlr_10.42.42.2(pid=9334): stderr: | �[0;m�[1;31m20221214043821876 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214043821876 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214043821876 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214043821876 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214043821876 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214043821877 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214043821888 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2399/run.2022-12-14_03-34-50/gprs:nanobts+band-1900/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214043821898 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214043821898 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214043821898 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 04:38:25.188904 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=9327): Terminating (SIGTERM) 04:38:25.228234 run iperf3-srv_10.42.42.10(pid=9328): Terminating (SIGTERM) 04:38:25.267791 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=9329): Terminating (SIGTERM) 04:38:25.307263 run iperf3-srv_10.42.42.10(pid=9330): Terminating (SIGTERM) 04:38:25.346811 run pcap-recorder_any(filters='host 10.42.42.2')(pid=9333): Terminating (SIGTERM) 04:38:25.386198 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=9336): Terminating (SIGTERM) 04:38:25.425617 run pcap-recorder_any(filters='host 10.42.42.6')(pid=9339): Terminating (SIGTERM) 04:38:25.435181 --- ParallelTerminationStrategy: PID 9327 died... 04:38:25.488504 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=9327): Terminated: ok {rc=0} 04:38:25.498214 --- ParallelTerminationStrategy: PID 9328 died... 04:38:25.550789 run iperf3-srv_10.42.42.10(pid=9328): Terminated {rc=256} 04:38:25.560385 --- ParallelTerminationStrategy: PID 9329 died... 04:38:25.613145 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=9329): Terminated: ok {rc=0} 04:38:25.622717 --- ParallelTerminationStrategy: PID 9330 died... 04:38:25.675345 run iperf3-srv_10.42.42.10(pid=9330): Terminated {rc=256} 04:38:25.684903 --- ParallelTerminationStrategy: PID 9333 died... 04:38:25.737749 run pcap-recorder_any(filters='host 10.42.42.2')(pid=9333): Terminated: ok {rc=0} 04:38:25.747339 --- ParallelTerminationStrategy: PID 9336 died... 04:38:25.800105 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=9336): Terminated: ok {rc=0} 04:38:25.809881 --- ParallelTerminationStrategy: PID 9339 died... 04:38:25.862707 run pcap-recorder_any(filters='host 10.42.42.6')(pid=9339): Terminated: ok {rc=0} 04:38:25.946395 bus /gobi_0: Setting Powered False 04:38:27.048559 bus /gobi_0: Setting Powered False 04:38:28.155637 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=9337): Process ended prematurely: osmo-stp_10.42.42.5(pid=9337) [trial-2399↪gprs:nanobts+band-1900↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9337)]