Failed
gprs:sysmo+mod-bts0-dynts-osmo.cs_paging_gprs_active.py (from gprs_sysmo+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=4725): Process ended prematurely: osmo-stp_10.42.42.5(pid=4725) [trial-2399↪gprs:sysmo+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=4725)]
Standard Output
---------------------------------------------- trial-2399 gprs:sysmo+mod-bts0-dynts-osmo cs_paging_gprs_active.py ---------------------------------------------- 03:43:43.049170 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 03:43:43.059867 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 03:43:43.205829 tst cs_paging_gprs_active.py: using LAC 38309 03:43:43.325117 tst cs_paging_gprs_active.py: using RAC 59 03:43:43.446335 tst cs_paging_gprs_active.py: using CellId 38309 03:43:43.567744 tst cs_paging_gprs_active.py: using BVCI 38310 03:43:43.591163 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 03:43:43.602018 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 03:43:43.612612 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 03:43:43.623347 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 03:43:43.633942 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 03:43:43.644497 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 03:43:43.655265 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 03:43:43.666207 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 03:43:43.677097 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 03:43:43.798295 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 03:43:44.097671 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 03:43:44.235865 run iperf3-srv_10.42.42.10: Starting iperf3-srv 03:43:44.579117 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=4715): Launched 03:43:44.863775 run iperf3-srv_10.42.42.10(pid=4716): Launched 03:43:45.065698 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 03:43:45.203160 run iperf3-srv_10.42.42.10: Starting iperf3-srv 03:43:45.546057 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=4717): Launched 03:43:45.830705 run iperf3-srv_10.42.42.10(pid=4718): Launched 03:43:46.045237 tst cs_paging_gprs_active.py:38: start network... 03:43:46.177091 run osmo-hlr_10.42.42.2: Starting osmo-hlr 03:43:46.719141 run create_hlr_db(pid=4719): Launched 03:43:46.898709 bus /gobi_6: Setting Powered False 03:43:47.917701 run create_hlr_db(pid=4719): Terminated: ok {rc=0} 03:43:48.355228 run pcap-recorder_any(filters='host 10.42.42.2')(pid=4721): Launched 03:43:48.686434 run osmo-hlr_10.42.42.2(pid=4722): Launched 03:43:48.808105 run osmo-stp_10.42.42.5: Starting osmo-stp 03:43:49.375475 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=4724): Launched 03:43:49.683147 run osmo-stp_10.42.42.5(pid=4725): Launched 03:43:49.793589 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 03:43:50.332304 run pcap-recorder_any(filters='host 10.42.42.6')(pid=4727): Launched 03:43:50.441244 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 03:43:50.710137 run patchelf(pid=4728): Launched 03:43:50.889528 run osmo-stp_10.42.42.5(pid=4725): ERR: Terminated: ERROR {rc=1} [trial-2399↪gprs:sysmo+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=4725)] 03:43:51.020416 run osmo-stp_10.42.42.5(pid=4725): stdout: | (launched: 2022-12-14_03:43:49.531316) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 03:43:51.151588 run osmo-stp_10.42.42.5(pid=4725): stderr: | �[0;m�[38;5;43m20221214034349706 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214034349706 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214034349706 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214034349706 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214034349707 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214034349707 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214034349707 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 03:43:51.278188 run osmo-stp_10.42.42.5(pid=4725): stdout: | (launched: 2022-12-14_03:43:49.531316) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 03:43:51.403528 run osmo-stp_10.42.42.5(pid=4725): stderr: | �[0;m�[38;5;43m20221214034349706 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214034349706 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214034349706 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214034349706 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214034349707 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214034349707 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214034349707 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 03:43:51.549132 run patchelf(pid=4728): Terminating (SIGINT) 03:43:51.719860 run patchelf(pid=4728): Terminated: ok {rc=0} 03:43:51.751301 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=4725): Process ended prematurely: osmo-stp_10.42.42.5(pid=4725) [trial-2399↪gprs:sysmo+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=4725)] [trial-2399↪gprs:sysmo+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38] 03:43:51.760559 tst cs_paging_gprs_active.py:38: Test FAILED (8.7 sec) 03:43:51.820377 run osmo-hlr_10.42.42.2(pid=4722): ERR: Terminated: ERROR {rc=237} [trial-2399↪gprs:sysmo+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=4722)] 03:43:51.869131 run osmo-hlr_10.42.42.2(pid=4722): stdout: | (launched: 2022-12-14_03:43:48.523076) 03:43:51.918652 run osmo-hlr_10.42.42.2(pid=4722): stderr: | �[0;m�[1;31m20221214034348725 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214034348725 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214034348725 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214034348725 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214034348725 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214034348725 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214034348738 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2399/run.2022-12-14_03-34-50/gprs:sysmo+mod-bts0-dynts-osmo/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214034348746 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214034348746 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214034348746 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 03:43:51.960515 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=4715): Terminating (SIGTERM) 03:43:51.999751 run iperf3-srv_10.42.42.10(pid=4716): Terminating (SIGTERM) 03:43:52.039199 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=4717): Terminating (SIGTERM) 03:43:52.078339 run iperf3-srv_10.42.42.10(pid=4718): Terminating (SIGTERM) 03:43:52.117587 run pcap-recorder_any(filters='host 10.42.42.2')(pid=4721): Terminating (SIGTERM) 03:43:52.156762 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=4724): Terminating (SIGTERM) 03:43:52.195914 run pcap-recorder_any(filters='host 10.42.42.6')(pid=4727): Terminating (SIGTERM) 03:43:52.205102 --- ParallelTerminationStrategy: PID 4715 died... 03:43:52.258245 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=4715): Terminated: ok {rc=0} 03:43:52.268186 --- ParallelTerminationStrategy: PID 4716 died... 03:43:52.320911 run iperf3-srv_10.42.42.10(pid=4716): Terminated {rc=256} 03:43:52.330460 --- ParallelTerminationStrategy: PID 4717 died... 03:43:52.383037 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=4717): Terminated: ok {rc=0} 03:43:52.392571 --- ParallelTerminationStrategy: PID 4718 died... 03:43:52.444715 run iperf3-srv_10.42.42.10(pid=4718): Terminated {rc=256} 03:43:52.454333 --- ParallelTerminationStrategy: PID 4721 died... 03:43:52.506603 run pcap-recorder_any(filters='host 10.42.42.2')(pid=4721): Terminated: ok {rc=0} 03:43:52.516101 --- ParallelTerminationStrategy: PID 4724 died... 03:43:52.568514 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=4724): Terminated: ok {rc=0} 03:43:52.578105 --- ParallelTerminationStrategy: PID 4727 died... 03:43:52.630623 run pcap-recorder_any(filters='host 10.42.42.6')(pid=4727): Terminated: ok {rc=0} 03:43:52.713194 bus /gobi_0: Setting Powered False 03:43:53.820013 bus /gobi_0: Setting Powered False 03:43:54.932324 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=4725): Process ended prematurely: osmo-stp_10.42.42.5(pid=4725) [trial-2399↪gprs:sysmo+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=4725)]