Failed
gprs:trx-sysmocell5000+mod-bts0-dynts-ipa.cs_paging_gprs_active.py (from gprs_trx-sysmocell5000+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=6696): Process ended prematurely: osmo-stp_10.42.42.5(pid=6696) [trial-2399↪gprs:trx-sysmocell5000+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=6696)]
Standard Output
---------------------------------------------- trial-2399 gprs:trx-sysmocell5000+mod-bts0-dynts-ipa cs_paging_gprs_active.py ---------------------------------------------- 04:08:09.532326 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 04:08:09.543311 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 04:08:09.697665 tst cs_paging_gprs_active.py: using LAC 38439 04:08:09.819275 tst cs_paging_gprs_active.py: using RAC 189 04:08:09.934721 tst cs_paging_gprs_active.py: using CellId 38439 04:08:10.050194 tst cs_paging_gprs_active.py: using BVCI 38440 04:08:10.072830 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 04:08:10.083790 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 04:08:10.094614 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 04:08:10.105333 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 04:08:10.116041 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 04:08:10.126749 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 04:08:10.137660 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 04:08:10.148385 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 04:08:10.159258 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 04:08:10.278441 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 04:08:10.552389 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 04:08:10.675935 run iperf3-srv_10.42.42.10: Starting iperf3-srv 04:08:10.983555 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=6686): Launched 04:08:11.239314 run iperf3-srv_10.42.42.10(pid=6687): Launched 04:08:11.420267 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 04:08:11.543194 run iperf3-srv_10.42.42.10: Starting iperf3-srv 04:08:11.850762 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=6688): Launched 04:08:12.106801 run iperf3-srv_10.42.42.10(pid=6689): Launched 04:08:12.287474 tst cs_paging_gprs_active.py:38: start network... 04:08:12.411119 run osmo-hlr_10.42.42.2: Starting osmo-hlr 04:08:12.889389 run create_hlr_db(pid=6690): Launched 04:08:13.059214 bus /gobi_6: Setting Powered False 04:08:14.082400 run create_hlr_db(pid=6690): Terminated: ok {rc=0} 04:08:14.507180 run pcap-recorder_any(filters='host 10.42.42.2')(pid=6692): Launched 04:08:14.825767 run osmo-hlr_10.42.42.2(pid=6693): Launched 04:08:14.943416 run osmo-stp_10.42.42.5: Starting osmo-stp 04:08:15.500203 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=6695): Launched 04:08:15.819317 run osmo-stp_10.42.42.5(pid=6696): Launched 04:08:16.024775 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 04:08:16.574668 run pcap-recorder_any(filters='host 10.42.42.6')(pid=6698): Launched 04:08:16.685573 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 04:08:16.968877 run patchelf(pid=6699): Launched 04:08:17.149499 run osmo-stp_10.42.42.5(pid=6696): ERR: Terminated: ERROR {rc=1} [trial-2399↪gprs:trx-sysmocell5000+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=6696)] 04:08:17.285525 run osmo-stp_10.42.42.5(pid=6696): stdout: | (launched: 2022-12-14_04:08:15.662388) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 04:08:17.423138 run osmo-stp_10.42.42.5(pid=6696): stderr: | �[0;m�[38;5;43m20221214040815863 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214040815863 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214040815864 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214040815864 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214040815865 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214040815865 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214040815865 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 04:08:17.555798 run osmo-stp_10.42.42.5(pid=6696): stdout: | (launched: 2022-12-14_04:08:15.662388) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 04:08:17.687288 run osmo-stp_10.42.42.5(pid=6696): stderr: | �[0;m�[38;5;43m20221214040815863 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214040815863 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214040815864 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214040815864 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214040815865 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214040815865 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214040815865 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 04:08:17.839881 run patchelf(pid=6699): Terminating (SIGINT) 04:08:18.019217 run patchelf(pid=6699): Terminated: ok {rc=0} 04:08:18.052626 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=6696): Process ended prematurely: osmo-stp_10.42.42.5(pid=6696) [trial-2399↪gprs:trx-sysmocell5000+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=6696)] [trial-2399↪gprs:trx-sysmocell5000+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38] 04:08:18.063289 tst cs_paging_gprs_active.py:38: Test FAILED (8.6 sec) 04:08:18.127284 run osmo-hlr_10.42.42.2(pid=6693): ERR: Terminated: ERROR {rc=237} [trial-2399↪gprs:trx-sysmocell5000+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=6693)] 04:08:18.179156 run osmo-hlr_10.42.42.2(pid=6693): stdout: | (launched: 2022-12-14_04:08:14.669733) 04:08:18.231865 run osmo-hlr_10.42.42.2(pid=6693): stderr: | �[0;m�[1;31m20221214040814862 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214040814862 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214040814862 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214040814862 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214040814862 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214040814862 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214040814874 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2399/run.2022-12-14_03-34-50/gprs:trx-sysmocell5000+mod-bts0-dynts-ipa/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214040814882 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214040814882 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214040814882 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 04:08:18.276570 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=6686): Terminating (SIGTERM) 04:08:18.318664 run iperf3-srv_10.42.42.10(pid=6687): Terminating (SIGTERM) 04:08:18.360710 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=6688): Terminating (SIGTERM) 04:08:18.402762 run iperf3-srv_10.42.42.10(pid=6689): Terminating (SIGTERM) 04:08:18.444621 run pcap-recorder_any(filters='host 10.42.42.2')(pid=6692): Terminating (SIGTERM) 04:08:18.486578 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=6695): Terminating (SIGTERM) 04:08:18.528624 run pcap-recorder_any(filters='host 10.42.42.6')(pid=6698): Terminating (SIGTERM) 04:08:18.538271 --- ParallelTerminationStrategy: PID 6686 died... 04:08:18.594421 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=6686): Terminated: ok {rc=0} 04:08:18.604347 --- ParallelTerminationStrategy: PID 6687 died... 04:08:18.660254 run iperf3-srv_10.42.42.10(pid=6687): Terminated {rc=256} 04:08:18.670185 --- ParallelTerminationStrategy: PID 6688 died... 04:08:18.726093 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=6688): Terminated: ok {rc=0} 04:08:18.736055 --- ParallelTerminationStrategy: PID 6689 died... 04:08:18.791971 run iperf3-srv_10.42.42.10(pid=6689): Terminated {rc=256} 04:08:18.801916 --- ParallelTerminationStrategy: PID 6692 died... 04:08:18.857782 run pcap-recorder_any(filters='host 10.42.42.2')(pid=6692): Terminated: ok {rc=0} 04:08:18.867763 --- ParallelTerminationStrategy: PID 6695 died... 04:08:18.924003 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=6695): Terminated: ok {rc=0} 04:08:18.934010 --- ParallelTerminationStrategy: PID 6698 died... 04:08:18.990337 run pcap-recorder_any(filters='host 10.42.42.6')(pid=6698): Terminated: ok {rc=0} 04:08:19.077353 bus /gobi_0: Setting Powered False 04:08:20.182950 bus /gobi_0: Setting Powered False 04:08:21.295719 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=6696): Process ended prematurely: osmo-stp_10.42.42.5(pid=6696) [trial-2399↪gprs:trx-sysmocell5000+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=6696)]