Failed
dynts:trx-lms+mod-bts0-dynts67-osmo.switch_tch_pdch.py (from dynts_trx-lms+mod-bts0-dynts67-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=8580): Process ended prematurely: osmo-stp_10.42.42.5(pid=8580) [trial-2399↪dynts:trx-lms+mod-bts0-dynts67-osmo↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8580)]
Standard Output
---------------------------------------------- trial-2399 dynts:trx-lms+mod-bts0-dynts67-osmo switch_tch_pdch.py ---------------------------------------------- 04:27:28.169077 tst dynts:trx-lms+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 04:27:28.180090 tst dynts:trx-lms+mod-bts0-dynts67-osmo: Using 1 x bts (candidates: 1) 04:27:28.333537 tst switch_tch_pdch.py: using LAC 38541 04:27:28.449975 tst switch_tch_pdch.py: using RAC 36 04:27:28.599216 tst switch_tch_pdch.py: using CellId 38541 04:27:28.714970 tst switch_tch_pdch.py: using BVCI 38542 04:27:28.738140 tst dynts:trx-lms+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 04:27:28.749240 tst dynts:trx-lms+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 04:27:28.760129 tst dynts:trx-lms+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 04:27:28.771056 tst dynts:trx-lms+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 04:27:28.781954 tst dynts:trx-lms+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 04:27:28.792884 tst dynts:trx-lms+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 04:27:28.803862 tst dynts:trx-lms+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 04:27:28.814833 tst dynts:trx-lms+mod-bts0-dynts67-osmo: Using 1 x modem (candidates: 2) 04:27:28.934876 tst dynts:trx-lms+mod-bts0-dynts67-osmo: Using 1 x modem (candidates: 2) 04:27:29.222803 tst switch_tch_pdch.py:51: start network... 04:27:29.355437 run osmo-hlr_10.42.42.2: Starting osmo-hlr 04:27:29.829400 run create_hlr_db(pid=8574): Launched 04:27:29.959560 bus /gobi_6: Setting Powered False 04:27:31.054631 run create_hlr_db(pid=8574): Terminated: ok {rc=0} 04:27:31.463196 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8576): Launched 04:27:31.901663 run osmo-hlr_10.42.42.2(pid=8577): Launched 04:27:32.139869 run osmo-stp_10.42.42.5: Starting osmo-stp 04:27:32.652441 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8579): Launched 04:27:32.948637 run osmo-stp_10.42.42.5(pid=8580): Launched 04:27:33.055818 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 04:27:33.549736 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8582): Launched 04:27:33.654702 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 04:27:33.913502 run patchelf(pid=8583): Launched 04:27:34.087263 run osmo-stp_10.42.42.5(pid=8580): ERR: Terminated: ERROR {rc=1} [trial-2399↪dynts:trx-lms+mod-bts0-dynts67-osmo↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8580)] 04:27:34.214505 run osmo-stp_10.42.42.5(pid=8580): stdout: | (launched: 2022-12-14_04:27:32.803032) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 04:27:34.341850 run osmo-stp_10.42.42.5(pid=8580): stderr: | �[0;m�[38;5;43m20221214042732972 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214042732972 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214042732972 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214042732973 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214042732973 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214042732973 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214042732973 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 04:27:34.464296 run osmo-stp_10.42.42.5(pid=8580): stdout: | (launched: 2022-12-14_04:27:32.803032) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 04:27:34.585968 run osmo-stp_10.42.42.5(pid=8580): stderr: | �[0;m�[38;5;43m20221214042732972 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214042732972 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214042732972 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214042732973 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214042732973 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214042732973 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214042732973 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 04:27:34.727923 run patchelf(pid=8583): Terminating (SIGINT) 04:27:34.894661 run patchelf(pid=8583): Terminated: ok {rc=0} 04:27:34.925099 tst switch_tch_pdch.py:54: ERR: Error: osmo-stp_10.42.42.5(pid=8580): Process ended prematurely: osmo-stp_10.42.42.5(pid=8580) [trial-2399↪dynts:trx-lms+mod-bts0-dynts67-osmo↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8580)] [trial-2399↪dynts:trx-lms+mod-bts0-dynts67-osmo↪switch_tch_pdch.py:54] 04:27:34.933616 tst switch_tch_pdch.py:54: Test FAILED (6.8 sec) 04:27:34.994048 run osmo-hlr_10.42.42.2(pid=8577): ERR: Terminated: ERROR {rc=237} [trial-2399↪dynts:trx-lms+mod-bts0-dynts67-osmo↪switch_tch_pdch.py↪switch_tch_pdch.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=8577)] 04:27:35.043225 run osmo-hlr_10.42.42.2(pid=8577): stdout: | (launched: 2022-12-14_04:27:31.619390) 04:27:35.093314 run osmo-hlr_10.42.42.2(pid=8577): stderr: | �[0;m�[1;31m20221214042731858 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214042731858 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214042731858 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214042731858 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214042731858 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214042731858 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214042731875 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2399/run.2022-12-14_03-34-50/dynts:trx-lms+mod-bts0-dynts67-osmo/switch_tch_pdch.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214042731891 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214042731891 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214042731891 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 04:27:35.135890 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8576): Terminating (SIGTERM) 04:27:35.175379 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8579): Terminating (SIGTERM) 04:27:35.215100 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8582): Terminating (SIGTERM) 04:27:35.224358 --- ParallelTerminationStrategy: PID 8576 died... 04:27:35.277678 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8576): Terminated: ok {rc=0} 04:27:35.287313 --- ParallelTerminationStrategy: PID 8579 died... 04:27:35.340157 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8579): Terminated: ok {rc=0} 04:27:35.349812 --- ParallelTerminationStrategy: PID 8582 died... 04:27:35.402610 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8582): Terminated: ok {rc=0} 04:27:35.490932 bus /gobi_0: Setting Powered False 04:27:36.593233 bus /gobi_0: Setting Powered False 04:27:37.704661 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/dynts/switch_tch_pdch.py", line 54, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=8580): Process ended prematurely: osmo-stp_10.42.42.5(pid=8580) [trial-2399↪dynts:trx-lms+mod-bts0-dynts67-osmo↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8580)]