Failed
gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend.iperf3.py (from gprs_nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend)
Stacktrace
osmo-stp_10.42.42.5(pid=10266): Process ended prematurely: osmo-stp_10.42.42.5(pid=10266) [trial-2399↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10266)]
Standard Output
---------------------------------------------- trial-2399 gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend iperf3.py ---------------------------------------------- 04:47:42.534279 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 04:47:42.546691 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x bts (candidates: 1) 04:47:42.690756 tst iperf3.py: using LAC 38649 04:47:42.819150 tst iperf3.py: using RAC 144 04:47:42.945382 tst iperf3.py: using CellId 38649 04:47:43.072191 tst iperf3.py: using BVCI 38650 04:47:43.096889 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 04:47:43.108741 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 04:47:43.120317 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 04:47:43.131965 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 04:47:43.143934 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 04:47:43.155821 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 04:47:43.167881 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 04:47:43.179732 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 04:47:43.191875 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 04:47:43.472333 tst iperf3.py:8: start iperfv3 server 10.42.42.10:5003... 04:47:43.597113 run iperf3-srv_10.42.42.10: Starting iperf3-srv 04:47:43.910568 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10258): Launched 04:47:44.170775 run iperf3-srv_10.42.42.10(pid=10259): Launched 04:47:44.353532 tst iperf3.py:8: start network... 04:47:44.478297 run osmo-hlr_10.42.42.2: Starting osmo-hlr 04:47:44.963199 run create_hlr_db(pid=10260): Launched 04:47:45.136155 bus /gobi_6: Setting Powered False 04:47:46.207597 run create_hlr_db(pid=10260): Terminated: ok {rc=0} 04:47:46.636088 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10262): Launched 04:47:47.047225 run osmo-hlr_10.42.42.2(pid=10263): Launched 04:47:47.250208 run osmo-stp_10.42.42.5: Starting osmo-stp 04:47:47.812829 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10265): Launched 04:47:48.138718 run osmo-stp_10.42.42.5(pid=10266): Launched 04:47:48.256352 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 04:47:48.824104 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10268): Launched 04:47:48.940644 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 04:47:49.224472 run patchelf(pid=10269): Launched 04:47:49.414000 run osmo-stp_10.42.42.5(pid=10266): ERR: Terminated: ERROR {rc=1} [trial-2399↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10266)] 04:47:49.552611 run osmo-stp_10.42.42.5(pid=10266): stdout: | (launched: 2022-12-14_04:47:47.977483) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 04:47:49.691176 run osmo-stp_10.42.42.5(pid=10266): stderr: | �[0;m�[38;5;43m20221214044748167 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214044748167 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214044748168 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214044748168 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214044748169 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214044748169 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214044748169 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 04:47:49.825787 run osmo-stp_10.42.42.5(pid=10266): stdout: | (launched: 2022-12-14_04:47:47.977483) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 04:47:49.959042 run osmo-stp_10.42.42.5(pid=10266): stderr: | �[0;m�[38;5;43m20221214044748167 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214044748167 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214044748168 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214044748168 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214044748169 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214044748169 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214044748169 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 04:47:50.113816 run patchelf(pid=10269): Terminating (SIGINT) 04:47:50.294942 run patchelf(pid=10269): Terminated: ok {rc=0} 04:47:50.328484 tst iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=10266): Process ended prematurely: osmo-stp_10.42.42.5(pid=10266) [trial-2399↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10266)] [trial-2399↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8] 04:47:50.338621 tst iperf3.py:8: Test FAILED (7.8 sec) 04:47:50.402098 run osmo-hlr_10.42.42.2(pid=10263): ERR: Terminated: ERROR {rc=237} [trial-2399↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=10263)] 04:47:50.454001 run osmo-hlr_10.42.42.2(pid=10263): stdout: | (launched: 2022-12-14_04:47:46.793843) 04:47:50.506703 run osmo-hlr_10.42.42.2(pid=10263): stderr: | �[0;m�[1;31m20221214044747130 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214044747130 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214044747130 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214044747130 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214044747130 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214044747130 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214044747144 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2399/run.2022-12-14_03-34-50/gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214044747152 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214044747152 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214044747152 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 04:47:50.551345 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10258): Terminating (SIGTERM) 04:47:50.593672 run iperf3-srv_10.42.42.10(pid=10259): Terminating (SIGTERM) 04:47:50.635571 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10262): Terminating (SIGTERM) 04:47:50.677542 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10265): Terminating (SIGTERM) 04:47:50.719320 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10268): Terminating (SIGTERM) 04:47:50.728879 --- ParallelTerminationStrategy: PID 10258 died... 04:47:50.785120 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10258): Terminated: ok {rc=0} 04:47:50.794998 --- ParallelTerminationStrategy: PID 10259 died... 04:47:50.850534 run iperf3-srv_10.42.42.10(pid=10259): Terminated {rc=256} 04:47:50.860390 --- ParallelTerminationStrategy: PID 10262 died... 04:47:50.916286 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10262): Terminated: ok {rc=0} 04:47:50.926192 --- ParallelTerminationStrategy: PID 10265 died... 04:47:50.982137 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10265): Terminated: ok {rc=0} 04:47:50.991960 --- ParallelTerminationStrategy: PID 10268 died... 04:47:51.047942 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10268): Terminated: ok {rc=0} 04:47:51.134732 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module> setup_run_iperf3_test_parallel(1) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=10266): Process ended prematurely: osmo-stp_10.42.42.5(pid=10266) [trial-2399↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10266)]