Failed
gprs:oc2g+mod-bts0-dynts-ipa.cs_paging_gprs_active.py (from gprs_oc2g+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=5206): Process ended prematurely: osmo-stp_10.42.42.5(pid=5206) [trial-2399↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=5206)]
Standard Output
---------------------------------------------- trial-2399 gprs:oc2g+mod-bts0-dynts-ipa cs_paging_gprs_active.py ---------------------------------------------- 03:50:36.547361 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 03:50:36.558117 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 03:50:36.706962 tst cs_paging_gprs_active.py: using LAC 38346 03:50:36.832575 tst cs_paging_gprs_active.py: using RAC 96 03:50:36.956144 tst cs_paging_gprs_active.py: using CellId 38346 03:50:37.094868 tst cs_paging_gprs_active.py: using BVCI 38347 03:50:37.119626 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 03:50:37.130787 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 03:50:37.141678 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 03:50:37.152631 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 03:50:37.163782 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 03:50:37.175062 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 03:50:37.186367 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 03:50:37.197525 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 03:50:37.208860 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 03:50:37.330282 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 03:50:37.606598 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 03:50:37.730336 run iperf3-srv_10.42.42.10: Starting iperf3-srv 03:50:38.039173 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=5196): Launched 03:50:38.297329 run iperf3-srv_10.42.42.10(pid=5197): Launched 03:50:38.478567 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 03:50:38.602315 run iperf3-srv_10.42.42.10: Starting iperf3-srv 03:50:38.911574 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=5198): Launched 03:50:39.169278 run iperf3-srv_10.42.42.10(pid=5199): Launched 03:50:39.350865 tst cs_paging_gprs_active.py:38: start network... 03:50:39.474734 run osmo-hlr_10.42.42.2: Starting osmo-hlr 03:50:39.955952 run create_hlr_db(pid=5200): Launched 03:50:40.127122 bus /gobi_6: Setting Powered False 03:50:41.149427 run create_hlr_db(pid=5200): Terminated: ok {rc=0} 03:50:41.575787 run pcap-recorder_any(filters='host 10.42.42.2')(pid=5202): Launched 03:50:41.897332 run osmo-hlr_10.42.42.2(pid=5203): Launched 03:50:42.038862 run osmo-stp_10.42.42.5: Starting osmo-stp 03:50:42.595815 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=5205): Launched 03:50:42.916448 run osmo-stp_10.42.42.5(pid=5206): Launched 03:50:43.032670 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 03:50:43.594049 run pcap-recorder_any(filters='host 10.42.42.6')(pid=5208): Launched 03:50:43.709310 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 03:50:43.989683 run patchelf(pid=5209): Launched 03:50:44.177665 run osmo-stp_10.42.42.5(pid=5206): ERR: Terminated: ERROR {rc=1} [trial-2399↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=5206)] 03:50:44.315265 run osmo-stp_10.42.42.5(pid=5206): stdout: | (launched: 2022-12-14_03:50:42.758836) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 03:50:44.453260 run osmo-stp_10.42.42.5(pid=5206): stderr: | �[0;m�[38;5;43m20221214035042948 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214035042948 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214035042949 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214035042949 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214035042950 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214035042950 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214035042950 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 03:50:44.587130 run osmo-stp_10.42.42.5(pid=5206): stdout: | (launched: 2022-12-14_03:50:42.758836) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 03:50:44.719279 run osmo-stp_10.42.42.5(pid=5206): stderr: | �[0;m�[38;5;43m20221214035042948 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214035042948 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214035042949 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214035042949 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214035042950 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214035042950 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214035042950 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 03:50:44.872161 run patchelf(pid=5209): Terminating (SIGINT) 03:50:45.051396 run patchelf(pid=5209): Terminated: ok {rc=0} 03:50:45.084395 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=5206): Process ended prematurely: osmo-stp_10.42.42.5(pid=5206) [trial-2399↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=5206)] [trial-2399↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38] 03:50:45.094273 tst cs_paging_gprs_active.py:38: Test FAILED (8.6 sec) 03:50:45.157361 run osmo-hlr_10.42.42.2(pid=5203): ERR: Terminated: ERROR {rc=237} [trial-2399↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=5203)] 03:50:45.208762 run osmo-hlr_10.42.42.2(pid=5203): stdout: | (launched: 2022-12-14_03:50:41.738851) 03:50:45.260704 run osmo-hlr_10.42.42.2(pid=5203): stderr: | �[0;m�[1;31m20221214035041984 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214035041984 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214035041984 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214035041984 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214035041984 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214035041984 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214035041997 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2399/run.2022-12-14_03-34-50/gprs:oc2g+mod-bts0-dynts-ipa/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214035042007 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214035042007 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214035042007 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 03:50:45.305050 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=5196): Terminating (SIGTERM) 03:50:45.346497 run iperf3-srv_10.42.42.10(pid=5197): Terminating (SIGTERM) 03:50:45.387930 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=5198): Terminating (SIGTERM) 03:50:45.429428 run iperf3-srv_10.42.42.10(pid=5199): Terminating (SIGTERM) 03:50:45.470967 run pcap-recorder_any(filters='host 10.42.42.2')(pid=5202): Terminating (SIGTERM) 03:50:45.512334 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=5205): Terminating (SIGTERM) 03:50:45.554219 run pcap-recorder_any(filters='host 10.42.42.6')(pid=5208): Terminating (SIGTERM) 03:50:45.563786 --- ParallelTerminationStrategy: PID 5196 died... 03:50:45.619780 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=5196): Terminated: ok {rc=0} 03:50:45.629642 --- ParallelTerminationStrategy: PID 5197 died... 03:50:45.684838 run iperf3-srv_10.42.42.10(pid=5197): Terminated {rc=256} 03:50:45.694673 --- ParallelTerminationStrategy: PID 5198 died... 03:50:45.750082 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=5198): Terminated: ok {rc=0} 03:50:45.759838 --- ParallelTerminationStrategy: PID 5199 died... 03:50:45.815314 run iperf3-srv_10.42.42.10(pid=5199): Terminated {rc=256} 03:50:45.825175 --- ParallelTerminationStrategy: PID 5202 died... 03:50:45.884869 run pcap-recorder_any(filters='host 10.42.42.2')(pid=5202): Terminated: ok {rc=0} 03:50:45.895186 --- ParallelTerminationStrategy: PID 5205 died... 03:50:45.951602 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=5205): Terminated: ok {rc=0} 03:50:45.961956 --- ParallelTerminationStrategy: PID 5208 died... 03:50:46.018357 run pcap-recorder_any(filters='host 10.42.42.6')(pid=5208): Terminated: ok {rc=0} 03:50:46.110369 bus /gobi_0: Setting Powered False 03:50:47.222829 bus /gobi_0: Setting Powered False 03:50:48.332107 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=5206): Process ended prematurely: osmo-stp_10.42.42.5(pid=5206) [trial-2399↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=5206)]