Failed
gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend.iperf3.py (from gprs_nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend)
Stacktrace
osmo-stp_10.42.42.5(pid=27043): Process ended prematurely: osmo-stp_10.42.42.5(pid=27043) [trial-2401↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=27043)]
Standard Output
---------------------------------------------- trial-2401 gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend iperf3.py ---------------------------------------------- 08:10:28.345431 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 08:10:28.358329 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x bts (candidates: 1) 08:10:28.499023 tst iperf3.py: using LAC 39571 08:10:28.621668 tst iperf3.py: using RAC 46 08:10:28.743212 tst iperf3.py: using CellId 39571 08:10:28.865136 tst iperf3.py: using BVCI 39572 08:10:28.888667 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 08:10:28.900264 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 08:10:28.911497 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 08:10:28.922745 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 08:10:28.933958 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 08:10:28.945210 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 08:10:28.956405 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 08:10:28.967503 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 08:10:28.978832 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 08:10:29.277292 tst iperf3.py:8: start iperfv3 server 10.42.42.10:5003... 08:10:29.413087 run iperf3-srv_10.42.42.10: Starting iperf3-srv 08:10:29.753102 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=27035): Launched 08:10:30.035088 run iperf3-srv_10.42.42.10(pid=27036): Launched 08:10:30.234338 tst iperf3.py:8: start network... 08:10:30.370043 run osmo-hlr_10.42.42.2: Starting osmo-hlr 08:10:30.905742 run create_hlr_db(pid=27037): Launched 08:10:31.103109 bus /gobi_6: Setting Powered False 08:10:32.124140 run create_hlr_db(pid=27037): Terminated: ok {rc=0} 08:10:32.567202 run pcap-recorder_any(filters='host 10.42.42.2')(pid=27039): Launched 08:10:32.897581 run osmo-hlr_10.42.42.2(pid=27040): Launched 08:10:33.017930 run osmo-stp_10.42.42.5: Starting osmo-stp 08:10:33.590856 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=27042): Launched 08:10:33.919879 run osmo-stp_10.42.42.5(pid=27043): Launched 08:10:34.038568 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 08:10:34.611582 run pcap-recorder_any(filters='host 10.42.42.6')(pid=27045): Launched 08:10:34.728375 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 08:10:35.015476 run patchelf(pid=27046): Launched 08:10:35.207006 run osmo-stp_10.42.42.5(pid=27043): ERR: Terminated: ERROR {rc=1} [trial-2401↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=27043)] 08:10:35.347351 run osmo-stp_10.42.42.5(pid=27043): stdout: | (launched: 2022-12-14_08:10:33.757245) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 08:10:35.487962 run osmo-stp_10.42.42.5(pid=27043): stderr: | �[0;m�[38;5;43m20221214081033951 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214081033951 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214081033951 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214081033951 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214081033952 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214081033952 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214081033952 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 08:10:35.623612 run osmo-stp_10.42.42.5(pid=27043): stdout: | (launched: 2022-12-14_08:10:33.757245) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 08:10:35.757715 run osmo-stp_10.42.42.5(pid=27043): stderr: | �[0;m�[38;5;43m20221214081033951 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214081033951 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214081033951 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214081033951 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214081033952 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214081033952 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214081033952 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 08:10:35.914599 run patchelf(pid=27046): Terminating (SIGINT) 08:10:36.099345 run patchelf(pid=27046): Terminated: ok {rc=0} 08:10:36.133293 tst iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=27043): Process ended prematurely: osmo-stp_10.42.42.5(pid=27043) [trial-2401↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=27043)] [trial-2401↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8] 08:10:36.143366 tst iperf3.py:8: Test FAILED (7.8 sec) 08:10:36.206908 run osmo-hlr_10.42.42.2(pid=27040): ERR: Terminated: ERROR {rc=237} [trial-2401↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=27040)] 08:10:36.258742 run osmo-hlr_10.42.42.2(pid=27040): stdout: | (launched: 2022-12-14_08:10:32.734070) 08:10:36.311284 run osmo-hlr_10.42.42.2(pid=27040): stderr: | �[0;m�[1;31m20221214081032931 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214081032931 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214081032931 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214081032931 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214081032931 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214081032931 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214081032943 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2401/run.2022-12-14_06-57-06/gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214081032951 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214081032951 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214081032951 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 08:10:36.356055 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=27035): Terminating (SIGTERM) 08:10:36.398268 run iperf3-srv_10.42.42.10(pid=27036): Terminating (SIGTERM) 08:10:36.440336 run pcap-recorder_any(filters='host 10.42.42.2')(pid=27039): Terminating (SIGTERM) 08:10:36.482926 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=27042): Terminating (SIGTERM) 08:10:36.525047 run pcap-recorder_any(filters='host 10.42.42.6')(pid=27045): Terminating (SIGTERM) 08:10:36.534694 --- ParallelTerminationStrategy: PID 27035 died... 08:10:36.591256 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=27035): Terminated: ok {rc=0} 08:10:36.601421 --- ParallelTerminationStrategy: PID 27036 died... 08:10:36.657325 run iperf3-srv_10.42.42.10(pid=27036): Terminated {rc=256} 08:10:36.667315 --- ParallelTerminationStrategy: PID 27039 died... 08:10:36.723553 run pcap-recorder_any(filters='host 10.42.42.2')(pid=27039): Terminated: ok {rc=0} 08:10:36.734008 --- ParallelTerminationStrategy: PID 27042 died... 08:10:36.790447 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=27042): Terminated: ok {rc=0} 08:10:36.800426 --- ParallelTerminationStrategy: PID 27045 died... 08:10:36.856515 run pcap-recorder_any(filters='host 10.42.42.6')(pid=27045): Terminated: ok {rc=0} 08:10:36.943410 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module> setup_run_iperf3_test_parallel(1) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=27043): Process ended prematurely: osmo-stp_10.42.42.5(pid=27043) [trial-2401↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=27043)]