Failed
gprs:trx-lms-limenet-micro.cs_paging_gprs_active.py (from gprs_trx-lms-limenet-micro)
Stacktrace
osmo-stp_10.42.42.5(pid=25323): Process ended prematurely: osmo-stp_10.42.42.5(pid=25323) [trial-2401↪gprs:trx-lms-limenet-micro↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=25323)]
Standard Output
---------------------------------------------- trial-2401 gprs:trx-lms-limenet-micro cs_paging_gprs_active.py ---------------------------------------------- 07:53:45.656464 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 07:53:45.667719 tst gprs:trx-lms-limenet-micro: Using 1 x bts (candidates: 1) 07:53:45.810999 tst cs_paging_gprs_active.py: using LAC 39484 07:53:45.946309 tst cs_paging_gprs_active.py: using RAC 214 07:53:46.079640 tst cs_paging_gprs_active.py: using CellId 39484 07:53:46.211442 tst cs_paging_gprs_active.py: using BVCI 39485 07:53:46.238069 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 07:53:46.250788 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 07:53:46.263141 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 07:53:46.275489 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 07:53:46.288840 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 07:53:46.303261 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 07:53:46.316424 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 07:53:46.329274 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 07:53:46.342447 tst gprs:trx-lms-limenet-micro: Using 1 x modem (candidates: 4) 07:53:46.490340 tst gprs:trx-lms-limenet-micro: Using 1 x modem (candidates: 4) 07:53:46.822724 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 07:53:46.956193 run iperf3-srv_10.42.42.10: Starting iperf3-srv 07:53:47.291619 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=25313): Launched 07:53:47.561827 run iperf3-srv_10.42.42.10(pid=25314): Launched 07:53:47.751065 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 07:53:47.879634 run iperf3-srv_10.42.42.10: Starting iperf3-srv 07:53:48.201583 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=25315): Launched 07:53:48.471543 run iperf3-srv_10.42.42.10(pid=25316): Launched 07:53:48.659799 tst cs_paging_gprs_active.py:38: start network... 07:53:48.788083 run osmo-hlr_10.42.42.2: Starting osmo-hlr 07:53:49.283993 run create_hlr_db(pid=25317): Launched 07:53:49.462266 bus /sierra_2: Setting Powered False 07:53:50.483280 run create_hlr_db(pid=25317): Terminated: ok {rc=0} 07:53:50.927857 run pcap-recorder_any(filters='host 10.42.42.2')(pid=25319): Launched 07:53:51.261758 run osmo-hlr_10.42.42.2(pid=25320): Launched 07:53:51.384087 run osmo-stp_10.42.42.5: Starting osmo-stp 07:53:51.960929 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=25322): Launched 07:53:52.295600 run osmo-stp_10.42.42.5(pid=25323): Launched 07:53:52.415888 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 07:53:52.997519 run pcap-recorder_any(filters='host 10.42.42.6')(pid=25325): Launched 07:53:53.116801 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 07:53:53.410510 run patchelf(pid=25326): Launched 07:53:53.605370 run osmo-stp_10.42.42.5(pid=25323): ERR: Terminated: ERROR {rc=1} [trial-2401↪gprs:trx-lms-limenet-micro↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=25323)] 07:53:53.747433 run osmo-stp_10.42.42.5(pid=25323): stdout: | (launched: 2022-12-14_07:53:52.130164) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 07:53:53.889199 run osmo-stp_10.42.42.5(pid=25323): stderr: | �[0;m�[38;5;43m20221214075352321 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214075352321 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214075352321 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214075352322 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214075352322 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214075352322 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214075352323 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 07:53:54.026533 run osmo-stp_10.42.42.5(pid=25323): stdout: | (launched: 2022-12-14_07:53:52.130164) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 07:53:54.163146 run osmo-stp_10.42.42.5(pid=25323): stderr: | �[0;m�[38;5;43m20221214075352321 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214075352321 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214075352321 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214075352322 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214075352322 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214075352322 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214075352323 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 07:53:54.322809 run patchelf(pid=25326): Terminating (SIGINT) 07:53:54.510776 run patchelf(pid=25326): Terminated: ok {rc=0} 07:53:54.545795 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=25323): Process ended prematurely: osmo-stp_10.42.42.5(pid=25323) [trial-2401↪gprs:trx-lms-limenet-micro↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=25323)] [trial-2401↪gprs:trx-lms-limenet-micro↪cs_paging_gprs_active.py:38] 07:53:54.556021 tst cs_paging_gprs_active.py:38: Test FAILED (8.9 sec) 07:53:54.620516 run osmo-hlr_10.42.42.2(pid=25320): ERR: Terminated: ERROR {rc=237} [trial-2401↪gprs:trx-lms-limenet-micro↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=25320)] 07:53:54.672384 run osmo-hlr_10.42.42.2(pid=25320): stdout: | (launched: 2022-12-14_07:53:51.096779) 07:53:54.724826 run osmo-hlr_10.42.42.2(pid=25320): stderr: | �[0;m�[1;31m20221214075351296 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214075351296 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214075351296 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214075351296 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214075351296 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214075351296 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214075351308 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2401/run.2022-12-14_06-57-06/gprs:trx-lms-limenet-micro/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214075351317 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214075351318 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214075351318 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 07:53:54.770044 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=25313): Terminating (SIGTERM) 07:53:54.812362 run iperf3-srv_10.42.42.10(pid=25314): Terminating (SIGTERM) 07:53:54.854947 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=25315): Terminating (SIGTERM) 07:53:54.897488 run iperf3-srv_10.42.42.10(pid=25316): Terminating (SIGTERM) 07:53:54.939959 run pcap-recorder_any(filters='host 10.42.42.2')(pid=25319): Terminating (SIGTERM) 07:53:54.982487 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=25322): Terminating (SIGTERM) 07:53:55.024824 run pcap-recorder_any(filters='host 10.42.42.6')(pid=25325): Terminating (SIGTERM) 07:53:55.034855 --- ParallelTerminationStrategy: PID 25313 died... 07:53:55.092467 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=25313): Terminated: ok {rc=0} 07:53:55.102842 --- ParallelTerminationStrategy: PID 25314 died... 07:53:55.159589 run iperf3-srv_10.42.42.10(pid=25314): Terminated {rc=256} 07:53:55.169958 --- ParallelTerminationStrategy: PID 25315 died... 07:53:55.226470 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=25315): Terminated: ok {rc=0} 07:53:55.236744 --- ParallelTerminationStrategy: PID 25316 died... 07:53:55.293027 run iperf3-srv_10.42.42.10(pid=25316): Terminated {rc=256} 07:53:55.303159 --- ParallelTerminationStrategy: PID 25319 died... 07:53:55.359912 run pcap-recorder_any(filters='host 10.42.42.2')(pid=25319): Terminated: ok {rc=0} 07:53:55.370300 --- ParallelTerminationStrategy: PID 25322 died... 07:53:55.427086 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=25322): Terminated: ok {rc=0} 07:53:55.437303 --- ParallelTerminationStrategy: PID 25325 died... 07:53:55.493944 run pcap-recorder_any(filters='host 10.42.42.6')(pid=25325): Terminated: ok {rc=0} 07:53:55.582459 bus /gobi_0: Setting Powered False 07:53:56.689648 bus /gobi_0: Setting Powered False 07:53:57.797335 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=25323): Process ended prematurely: osmo-stp_10.42.42.5(pid=25323) [trial-2401↪gprs:trx-lms-limenet-micro↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=25323)]