Failed
gprs:sysmo+mod-bts0-dynts-ipa.ping_idle_ping.py (from gprs_sysmo+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=20626): Process ended prematurely: osmo-stp_10.42.42.5(pid=20626) [trial-2401↪gprs:sysmo+mod-bts0-dynts-ipa↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=20626)]
Standard Output
---------------------------------------------- trial-2401 gprs:sysmo+mod-bts0-dynts-ipa ping_idle_ping.py ---------------------------------------------- 07:05:48.195666 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 07:05:48.207075 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 07:05:48.351675 tst ping_idle_ping.py: using LAC 39230 07:05:48.473451 tst ping_idle_ping.py: using RAC 215 07:05:48.592177 tst ping_idle_ping.py: using CellId 39230 07:05:48.720479 tst ping_idle_ping.py: using BVCI 39231 07:05:48.745606 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 07:05:48.757266 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 07:05:48.768586 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 07:05:48.780094 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 07:05:48.791750 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 07:05:48.803454 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 07:05:48.815235 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 07:05:48.826830 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 07:05:49.105071 tst ping_idle_ping.py:24: start network... 07:05:49.230530 run osmo-hlr_10.42.42.2: Starting osmo-hlr 07:05:49.717589 run create_hlr_db(pid=20616): Launched 07:05:49.892447 bus /gobi_6: Setting Powered False 07:05:50.913356 run create_hlr_db(pid=20616): Terminated: ok {rc=0} 07:05:51.320670 run pcap-recorder_any(filters='host 10.42.42.2')(pid=20618): Launched 07:05:51.626438 run osmo-hlr_10.42.42.2(pid=20619): Launched 07:05:51.736368 run osmo-stp_10.42.42.5: Starting osmo-stp 07:05:52.295686 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=20625): Launched 07:05:52.626242 run osmo-stp_10.42.42.5(pid=20626): Launched 07:05:52.746307 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 07:05:53.317981 run pcap-recorder_any(filters='host 10.42.42.6')(pid=20628): Launched 07:05:53.434406 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 07:05:53.720755 run patchelf(pid=20629): Launched 07:05:53.911569 run osmo-stp_10.42.42.5(pid=20626): ERR: Terminated: ERROR {rc=1} [trial-2401↪gprs:sysmo+mod-bts0-dynts-ipa↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=20626)] 07:05:54.051294 run osmo-stp_10.42.42.5(pid=20626): stdout: | (launched: 2022-12-14_07:05:52.461906) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 07:05:54.191515 run osmo-stp_10.42.42.5(pid=20626): stderr: | �[0;m�[38;5;43m20221214070552656 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214070552656 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214070552656 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214070552656 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214070552659 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214070552659 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214070552659 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 07:05:54.326414 run osmo-stp_10.42.42.5(pid=20626): stdout: | (launched: 2022-12-14_07:05:52.461906) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 07:05:54.460045 run osmo-stp_10.42.42.5(pid=20626): stderr: | �[0;m�[38;5;43m20221214070552656 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214070552656 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214070552656 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214070552656 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214070552659 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214070552659 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214070552659 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 07:05:54.617303 run patchelf(pid=20629): Terminating (SIGINT) 07:05:54.802113 run patchelf(pid=20629): Terminated: ok {rc=0} 07:05:54.835253 tst ping_idle_ping.py:27: ERR: Error: osmo-stp_10.42.42.5(pid=20626): Process ended prematurely: osmo-stp_10.42.42.5(pid=20626) [trial-2401↪gprs:sysmo+mod-bts0-dynts-ipa↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=20626)] [trial-2401↪gprs:sysmo+mod-bts0-dynts-ipa↪ping_idle_ping.py:27] 07:05:54.844370 tst ping_idle_ping.py:27: Test FAILED (6.6 sec) 07:05:54.907716 run osmo-hlr_10.42.42.2(pid=20619): ERR: Terminated: ERROR {rc=237} [trial-2401↪gprs:sysmo+mod-bts0-dynts-ipa↪ping_idle_ping.py↪ping_idle_ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=20619)] 07:05:54.959380 run osmo-hlr_10.42.42.2(pid=20619): stdout: | (launched: 2022-12-14_07:05:51.474909) 07:05:55.011531 run osmo-hlr_10.42.42.2(pid=20619): stderr: | �[0;m�[1;31m20221214070551655 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214070551655 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214070551655 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214070551655 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214070551655 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214070551655 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214070551670 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2401/run.2022-12-14_06-57-06/gprs:sysmo+mod-bts0-dynts-ipa/ping_idle_ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214070551680 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214070551681 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214070551681 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 07:05:55.056214 run pcap-recorder_any(filters='host 10.42.42.2')(pid=20618): Terminating (SIGTERM) 07:05:55.098703 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=20625): Terminating (SIGTERM) 07:05:55.140932 run pcap-recorder_any(filters='host 10.42.42.6')(pid=20628): Terminating (SIGTERM) 07:05:55.150633 --- ParallelTerminationStrategy: PID 20618 died... 07:05:55.207083 run pcap-recorder_any(filters='host 10.42.42.2')(pid=20618): Terminated: ok {rc=0} 07:05:55.217323 --- ParallelTerminationStrategy: PID 20625 died... 07:05:55.273387 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=20625): Terminated: ok {rc=0} 07:05:55.283344 --- ParallelTerminationStrategy: PID 20628 died... 07:05:55.339540 run pcap-recorder_any(filters='host 10.42.42.6')(pid=20628): Terminated: ok {rc=0} 07:05:55.427059 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping_idle_ping.py", line 27, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=20626): Process ended prematurely: osmo-stp_10.42.42.5(pid=20626) [trial-2401↪gprs:sysmo+mod-bts0-dynts-ipa↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=20626)]