Failed
gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend.iperf3.py (from gprs_nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend)
Stacktrace
osmo-stp_10.42.42.5(pid=1920): Process ended prematurely: osmo-stp_10.42.42.5(pid=1920) [trial-2402↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1920)]
Standard Output
---------------------------------------------- trial-2402 gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend iperf3.py ---------------------------------------------- 09:38:02.235808 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 09:38:02.250215 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x bts (candidates: 1) 09:38:02.388841 tst iperf3.py: using LAC 40032 09:38:02.507668 tst iperf3.py: using RAC 252 09:38:02.630454 tst iperf3.py: using CellId 40032 09:38:02.747361 tst iperf3.py: using BVCI 40033 09:38:02.770497 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 09:38:02.782070 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 09:38:02.793420 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 09:38:02.804615 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 09:38:02.816142 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 09:38:02.827813 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 09:38:02.839330 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 09:38:02.850666 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 09:38:02.862220 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 09:38:03.138818 tst iperf3.py:8: start iperfv3 server 10.42.42.10:5003... 09:38:03.262814 run iperf3-srv_10.42.42.10: Starting iperf3-srv 09:38:03.571115 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=1912): Launched 09:38:03.828015 run iperf3-srv_10.42.42.10(pid=1913): Launched 09:38:04.009300 tst iperf3.py:8: start network... 09:38:04.133763 run osmo-hlr_10.42.42.2: Starting osmo-hlr 09:38:04.605703 run create_hlr_db(pid=1914): Launched 09:38:04.777184 bus /gobi_6: Setting Powered False 09:38:05.798845 run create_hlr_db(pid=1914): Terminated: ok {rc=0} 09:38:06.221539 run pcap-recorder_any(filters='host 10.42.42.2')(pid=1916): Launched 09:38:06.540554 run osmo-hlr_10.42.42.2(pid=1917): Launched 09:38:06.660781 run osmo-stp_10.42.42.5: Starting osmo-stp 09:38:07.215547 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=1919): Launched 09:38:07.534009 run osmo-stp_10.42.42.5(pid=1920): Launched 09:38:07.648666 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 09:38:08.205735 run pcap-recorder_any(filters='host 10.42.42.6')(pid=1922): Launched 09:38:08.319859 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 09:38:08.598575 run patchelf(pid=1923): Launched 09:38:08.785055 run osmo-stp_10.42.42.5(pid=1920): ERR: Terminated: ERROR {rc=1} [trial-2402↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1920)] 09:38:08.921225 run osmo-stp_10.42.42.5(pid=1920): stdout: | (launched: 2022-12-14_09:38:07.377506) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 09:38:09.058623 run osmo-stp_10.42.42.5(pid=1920): stderr: | �[0;m�[38;5;43m20221214093807566 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214093807566 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214093807567 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214093807567 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214093807567 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214093807567 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214093807568 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 09:38:09.191220 run osmo-stp_10.42.42.5(pid=1920): stdout: | (launched: 2022-12-14_09:38:07.377506) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 09:38:09.322775 run osmo-stp_10.42.42.5(pid=1920): stderr: | �[0;m�[38;5;43m20221214093807566 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214093807566 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214093807567 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214093807567 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214093807567 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214093807567 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214093807568 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 09:38:09.475043 run patchelf(pid=1923): Terminating (SIGINT) 09:38:09.652377 run patchelf(pid=1923): Terminated: ok {rc=0} 09:38:09.685342 tst iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=1920): Process ended prematurely: osmo-stp_10.42.42.5(pid=1920) [trial-2402↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1920)] [trial-2402↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8] 09:38:09.695271 tst iperf3.py:8: Test FAILED (7.5 sec) 09:38:09.758026 run osmo-hlr_10.42.42.2(pid=1917): ERR: Terminated: ERROR {rc=237} [trial-2402↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=1917)] 09:38:09.809571 run osmo-hlr_10.42.42.2(pid=1917): stdout: | (launched: 2022-12-14_09:38:06.383787) 09:38:09.861757 run osmo-hlr_10.42.42.2(pid=1917): stderr: | �[0;m�[1;31m20221214093806578 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214093806578 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214093806578 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214093806578 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214093806578 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214093806579 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214093806594 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2402/run.2022-12-14_08-25-21/gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214093806603 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214093806603 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214093806603 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 09:38:09.906362 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=1912): Terminating (SIGTERM) 09:38:09.949215 run iperf3-srv_10.42.42.10(pid=1913): Terminating (SIGTERM) 09:38:09.991260 run pcap-recorder_any(filters='host 10.42.42.2')(pid=1916): Terminating (SIGTERM) 09:38:10.033513 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=1919): Terminating (SIGTERM) 09:38:10.075281 run pcap-recorder_any(filters='host 10.42.42.6')(pid=1922): Terminating (SIGTERM) 09:38:10.084866 --- ParallelTerminationStrategy: PID 1912 died... 09:38:10.140585 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=1912): Terminated: ok {rc=0} 09:38:10.150677 --- ParallelTerminationStrategy: PID 1913 died... 09:38:10.206147 run iperf3-srv_10.42.42.10(pid=1913): Terminated {rc=256} 09:38:10.215992 --- ParallelTerminationStrategy: PID 1916 died... 09:38:10.271521 run pcap-recorder_any(filters='host 10.42.42.2')(pid=1916): Terminated: ok {rc=0} 09:38:10.281641 --- ParallelTerminationStrategy: PID 1919 died... 09:38:10.337091 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=1919): Terminated: ok {rc=0} 09:38:10.347117 --- ParallelTerminationStrategy: PID 1922 died... 09:38:10.402289 run pcap-recorder_any(filters='host 10.42.42.6')(pid=1922): Terminated: ok {rc=0} 09:38:10.487661 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module> setup_run_iperf3_test_parallel(1) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=1920): Process ended prematurely: osmo-stp_10.42.42.5(pid=1920) [trial-2402↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1920)]