Failed
gprs:sysmo+mod-bts0-egprs.cs_paging_gprs_active.py (from gprs_sysmo+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=4233): Process ended prematurely: osmo-stp_10.42.42.5(pid=4233) [trial-2403↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=4233)]
Standard Output
---------------------------------------------- trial-2403 gprs:sysmo+mod-bts0-egprs cs_paging_gprs_active.py ---------------------------------------------- 09:59:29.310412 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 09:59:29.321199 tst gprs:sysmo+mod-bts0-egprs: Using 1 x bts (candidates: 1) 09:59:29.446780 tst cs_paging_gprs_active.py: using LAC 40143 09:59:29.574266 tst cs_paging_gprs_active.py: using RAC 108 09:59:29.702213 tst cs_paging_gprs_active.py: using CellId 40143 09:59:29.830960 tst cs_paging_gprs_active.py: using BVCI 40144 09:59:29.856483 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 09:59:29.867948 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 09:59:29.879070 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 09:59:29.890192 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 09:59:29.901171 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 09:59:29.912202 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 09:59:29.923485 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 09:59:29.934593 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 09:59:29.945861 tst gprs:sysmo+mod-bts0-egprs: Using 1 x modem (candidates: 4) 09:59:30.064885 tst gprs:sysmo+mod-bts0-egprs: Using 1 x modem (candidates: 4) 09:59:30.360070 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 09:59:30.489131 run iperf3-srv_10.42.42.10: Starting iperf3-srv 09:59:30.813967 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=4223): Launched 09:59:31.155830 run iperf3-srv_10.42.42.10(pid=4224): Launched 09:59:31.371528 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 09:59:31.515431 run iperf3-srv_10.42.42.10: Starting iperf3-srv 09:59:31.884081 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=4225): Launched 09:59:32.190673 run iperf3-srv_10.42.42.10(pid=4226): Launched 09:59:32.380692 tst cs_paging_gprs_active.py:38: start network... 09:59:32.510360 run osmo-hlr_10.42.42.2: Starting osmo-hlr 09:59:33.000871 run create_hlr_db(pid=4227): Launched 09:59:33.179580 bus /gobi_6: Setting Powered False 09:59:34.200505 run create_hlr_db(pid=4227): Terminated: ok {rc=0} 09:59:34.644476 run pcap-recorder_any(filters='host 10.42.42.2')(pid=4229): Launched 09:59:34.978606 run osmo-hlr_10.42.42.2(pid=4230): Launched 09:59:35.103492 run osmo-stp_10.42.42.5: Starting osmo-stp 09:59:35.686073 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=4232): Launched 09:59:36.020154 run osmo-stp_10.42.42.5(pid=4233): Launched 09:59:36.140030 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 09:59:36.719909 run pcap-recorder_any(filters='host 10.42.42.6')(pid=4235): Launched 09:59:36.838753 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 09:59:37.129070 run patchelf(pid=4236): Launched 09:59:37.323693 run osmo-stp_10.42.42.5(pid=4233): ERR: Terminated: ERROR {rc=1} [trial-2403↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=4233)] 09:59:37.465032 run osmo-stp_10.42.42.5(pid=4233): stdout: | (launched: 2022-12-14_09:59:35.854827) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 09:59:37.607304 run osmo-stp_10.42.42.5(pid=4233): stderr: | �[0;m�[38;5;43m20221214095936049 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214095936049 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214095936050 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214095936050 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214095936050 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214095936050 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214095936050 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 09:59:37.743872 run osmo-stp_10.42.42.5(pid=4233): stdout: | (launched: 2022-12-14_09:59:35.854827) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 09:59:37.879820 run osmo-stp_10.42.42.5(pid=4233): stderr: | �[0;m�[38;5;43m20221214095936049 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214095936049 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214095936050 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214095936050 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214095936050 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214095936050 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214095936050 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 09:59:38.038056 run patchelf(pid=4236): Terminating (SIGINT) 09:59:38.223731 run patchelf(pid=4236): Terminated: ok {rc=0} 09:59:38.258060 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=4233): Process ended prematurely: osmo-stp_10.42.42.5(pid=4233) [trial-2403↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=4233)] [trial-2403↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py:38] 09:59:38.267977 tst cs_paging_gprs_active.py:38: Test FAILED (9.0 sec) 09:59:38.331353 run osmo-hlr_10.42.42.2(pid=4230): ERR: Terminated: ERROR {rc=237} [trial-2403↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=4230)] 09:59:38.383312 run osmo-hlr_10.42.42.2(pid=4230): stdout: | (launched: 2022-12-14_09:59:34.813472) 09:59:38.435606 run osmo-hlr_10.42.42.2(pid=4230): stderr: | �[0;m�[1;31m20221214095935015 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214095935015 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214095935015 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214095935015 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214095935015 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214095935015 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214095935026 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2403/run.2022-12-14_09-52-37/gprs:sysmo+mod-bts0-egprs/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214095935037 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214095935037 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214095935037 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 09:59:38.480501 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=4223): Terminating (SIGTERM) 09:59:38.523268 run iperf3-srv_10.42.42.10(pid=4224): Terminating (SIGTERM) 09:59:38.566190 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=4225): Terminating (SIGTERM) 09:59:38.608305 run iperf3-srv_10.42.42.10(pid=4226): Terminating (SIGTERM) 09:59:38.650976 run pcap-recorder_any(filters='host 10.42.42.2')(pid=4229): Terminating (SIGTERM) 09:59:38.692746 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=4232): Terminating (SIGTERM) 09:59:38.734832 run pcap-recorder_any(filters='host 10.42.42.6')(pid=4235): Terminating (SIGTERM) 09:59:38.744583 --- ParallelTerminationStrategy: PID 4223 died... 09:59:38.801088 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=4223): Terminated: ok {rc=0} 09:59:38.811141 --- ParallelTerminationStrategy: PID 4224 died... 09:59:38.867190 run iperf3-srv_10.42.42.10(pid=4224): Terminated {rc=256} 09:59:38.877653 --- ParallelTerminationStrategy: PID 4225 died... 09:59:38.933325 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=4225): Terminated: ok {rc=0} 09:59:38.943309 --- ParallelTerminationStrategy: PID 4226 died... 09:59:38.998932 run iperf3-srv_10.42.42.10(pid=4226): Terminated {rc=256} 09:59:39.008898 --- ParallelTerminationStrategy: PID 4229 died... 09:59:39.064608 run pcap-recorder_any(filters='host 10.42.42.2')(pid=4229): Terminated: ok {rc=0} 09:59:39.074637 --- ParallelTerminationStrategy: PID 4232 died... 09:59:39.130448 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=4232): Terminated: ok {rc=0} 09:59:39.140533 --- ParallelTerminationStrategy: PID 4235 died... 09:59:39.196443 run pcap-recorder_any(filters='host 10.42.42.6')(pid=4235): Terminated: ok {rc=0} 09:59:39.285064 bus /gobi_0: Setting Powered False 09:59:40.389627 bus /gobi_0: Setting Powered False 09:59:41.500907 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=4233): Process ended prematurely: osmo-stp_10.42.42.5(pid=4233) [trial-2403↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=4233)]