Failed
gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend.iperf3.py (from gprs_nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend)
Stacktrace
osmo-stp_10.42.42.5(pid=11534): Process ended prematurely: osmo-stp_10.42.42.5(pid=11534) [trial-2403↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11534)]
Standard Output
---------------------------------------------- trial-2403 gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend iperf3.py ---------------------------------------------- 11:05:42.155533 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 11:05:42.167575 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x bts (candidates: 1) 11:05:42.312797 tst iperf3.py: using LAC 40493 11:05:42.441063 tst iperf3.py: using RAC 203 11:05:42.567428 tst iperf3.py: using CellId 40493 11:05:42.696767 tst iperf3.py: using BVCI 40494 11:05:42.721870 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 11:05:42.733710 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 11:05:42.745420 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 11:05:42.757580 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 11:05:42.769972 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 11:05:42.782486 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 11:05:42.794954 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 11:05:42.807114 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 11:05:42.819545 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 11:05:43.103158 tst iperf3.py:8: start iperfv3 server 10.42.42.10:5003... 11:05:43.228098 run iperf3-srv_10.42.42.10: Starting iperf3-srv 11:05:43.543343 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11526): Launched 11:05:43.803856 run iperf3-srv_10.42.42.10(pid=11527): Launched 11:05:43.986225 tst iperf3.py:8: start network... 11:05:44.111265 run osmo-hlr_10.42.42.2: Starting osmo-hlr 11:05:44.587731 run create_hlr_db(pid=11528): Launched 11:05:44.761637 bus /gobi_6: Setting Powered False 11:05:45.783193 run create_hlr_db(pid=11528): Terminated: ok {rc=0} 11:05:46.237968 run pcap-recorder_any(filters='host 10.42.42.2')(pid=11530): Launched 11:05:46.612236 run osmo-hlr_10.42.42.2(pid=11531): Launched 11:05:46.759506 run osmo-stp_10.42.42.5: Starting osmo-stp 11:05:47.491307 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=11533): Launched 11:05:47.795161 run osmo-stp_10.42.42.5(pid=11534): Launched 11:05:47.907105 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 11:05:48.435686 run pcap-recorder_any(filters='host 10.42.42.6')(pid=11536): Launched 11:05:48.543661 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 11:05:48.809649 run patchelf(pid=11537): Launched 11:05:48.987362 run osmo-stp_10.42.42.5(pid=11534): ERR: Terminated: ERROR {rc=1} [trial-2403↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11534)] 11:05:49.117842 run osmo-stp_10.42.42.5(pid=11534): stdout: | (launched: 2022-12-14_11:05:47.645817) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 11:05:49.248147 run osmo-stp_10.42.42.5(pid=11534): stderr: | �[0;m�[38;5;43m20221214110547814 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214110547814 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214110547814 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214110547815 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214110547815 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214110547815 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214110547816 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 11:05:49.374067 run osmo-stp_10.42.42.5(pid=11534): stdout: | (launched: 2022-12-14_11:05:47.645817) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 11:05:49.498165 run osmo-stp_10.42.42.5(pid=11534): stderr: | �[0;m�[38;5;43m20221214110547814 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214110547814 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214110547814 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214110547815 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214110547815 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214110547815 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214110547816 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 11:05:49.643593 run patchelf(pid=11537): Terminating (SIGINT) 11:05:49.814919 run patchelf(pid=11537): Terminated: ok {rc=0} 11:05:49.846448 tst iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=11534): Process ended prematurely: osmo-stp_10.42.42.5(pid=11534) [trial-2403↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11534)] [trial-2403↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8] 11:05:49.855877 tst iperf3.py:8: Test FAILED (7.7 sec) 11:05:49.916747 run osmo-hlr_10.42.42.2(pid=11531): ERR: Terminated: ERROR {rc=237} [trial-2403↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=11531)] 11:05:49.966482 run osmo-hlr_10.42.42.2(pid=11531): stdout: | (launched: 2022-12-14_11:05:46.408284) 11:05:50.016932 run osmo-hlr_10.42.42.2(pid=11531): stderr: | �[0;m�[1;31m20221214110546799 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214110546799 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214110546799 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214110546799 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214110546799 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214110546799 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214110546819 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2403/run.2022-12-14_09-52-37/gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214110546835 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214110546835 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214110546835 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 11:05:50.059620 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11526): Terminating (SIGTERM) 11:05:50.099657 run iperf3-srv_10.42.42.10(pid=11527): Terminating (SIGTERM) 11:05:50.139743 run pcap-recorder_any(filters='host 10.42.42.2')(pid=11530): Terminating (SIGTERM) 11:05:50.180111 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=11533): Terminating (SIGTERM) 11:05:50.220127 run pcap-recorder_any(filters='host 10.42.42.6')(pid=11536): Terminating (SIGTERM) 11:05:50.229311 --- ParallelTerminationStrategy: PID 11526 died... 11:05:50.283230 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11526): Terminated: ok {rc=0} 11:05:50.292879 --- ParallelTerminationStrategy: PID 11527 died... 11:05:50.346292 run iperf3-srv_10.42.42.10(pid=11527): Terminated {rc=256} 11:05:50.355687 --- ParallelTerminationStrategy: PID 11530 died... 11:05:50.409445 run pcap-recorder_any(filters='host 10.42.42.2')(pid=11530): Terminated: ok {rc=0} 11:05:50.419068 --- ParallelTerminationStrategy: PID 11533 died... 11:05:50.472771 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=11533): Terminated: ok {rc=0} 11:05:50.482206 --- ParallelTerminationStrategy: PID 11536 died... 11:05:50.535581 run pcap-recorder_any(filters='host 10.42.42.6')(pid=11536): Terminated: ok {rc=0} 11:05:50.624868 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module> setup_run_iperf3_test_parallel(1) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=11534): Process ended prematurely: osmo-stp_10.42.42.5(pid=11534) [trial-2403↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11534)]