Failed
gprs:nanobts+band-900.cs_paging_gprs_active.py (from gprs_nanobts+band-900)
Stacktrace
osmo-stp_10.42.42.5(pid=11314): Process ended prematurely: osmo-stp_10.42.42.5(pid=11314) [trial-2403↪gprs:nanobts+band-900↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11314)]
Standard Output
---------------------------------------------- trial-2403 gprs:nanobts+band-900 cs_paging_gprs_active.py ---------------------------------------------- 11:02:28.262078 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 11:02:28.272766 tst gprs:nanobts+band-900: Using 1 x bts (candidates: 1) 11:02:28.407306 tst cs_paging_gprs_active.py: using LAC 40477 11:02:28.527700 tst cs_paging_gprs_active.py: using RAC 187 11:02:28.653279 tst cs_paging_gprs_active.py: using CellId 40477 11:02:28.780520 tst cs_paging_gprs_active.py: using BVCI 40478 11:02:28.805859 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 11:02:28.817657 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 11:02:28.828905 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 11:02:28.840236 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 11:02:28.851628 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 11:02:28.863059 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 11:02:28.874718 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 11:02:28.886157 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 11:02:28.897747 tst gprs:nanobts+band-900: Using 1 x modem (candidates: 4) 11:02:29.016738 tst gprs:nanobts+band-900: Using 1 x modem (candidates: 4) 11:02:29.306814 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 11:02:29.435719 run iperf3-srv_10.42.42.10: Starting iperf3-srv 11:02:29.758235 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11304): Launched 11:02:30.026842 run iperf3-srv_10.42.42.10(pid=11305): Launched 11:02:30.214499 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 11:02:30.342431 run iperf3-srv_10.42.42.10: Starting iperf3-srv 11:02:30.664333 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11306): Launched 11:02:30.977695 run iperf3-srv_10.42.42.10(pid=11307): Launched 11:02:31.224667 tst cs_paging_gprs_active.py:38: start network... 11:02:31.371776 run osmo-hlr_10.42.42.2: Starting osmo-hlr 11:02:31.920124 run create_hlr_db(pid=11308): Launched 11:02:32.115553 bus /sierra_2: Setting Powered False 11:02:33.120201 run create_hlr_db(pid=11308): Terminated: ok {rc=0} 11:02:33.573863 run pcap-recorder_any(filters='host 10.42.42.2')(pid=11310): Launched 11:02:33.903562 run osmo-hlr_10.42.42.2(pid=11311): Launched 11:02:34.022810 run osmo-stp_10.42.42.5: Starting osmo-stp 11:02:34.590363 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=11313): Launched 11:02:34.919199 run osmo-stp_10.42.42.5(pid=11314): Launched 11:02:35.037203 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 11:02:35.609497 run pcap-recorder_any(filters='host 10.42.42.6')(pid=11316): Launched 11:02:35.726544 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 11:02:36.013919 run patchelf(pid=11317): Launched 11:02:36.206431 run osmo-stp_10.42.42.5(pid=11314): ERR: Terminated: ERROR {rc=1} [trial-2403↪gprs:nanobts+band-900↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11314)] 11:02:36.347391 run osmo-stp_10.42.42.5(pid=11314): stdout: | (launched: 2022-12-14_11:02:34.757223) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 11:02:36.487992 run osmo-stp_10.42.42.5(pid=11314): stderr: | �[0;m�[38;5;43m20221214110234946 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214110234946 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214110234946 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214110234947 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214110234947 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214110234947 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214110234947 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 11:02:36.623507 run osmo-stp_10.42.42.5(pid=11314): stdout: | (launched: 2022-12-14_11:02:34.757223) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 11:02:36.758874 run osmo-stp_10.42.42.5(pid=11314): stderr: | �[0;m�[38;5;43m20221214110234946 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214110234946 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214110234946 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214110234947 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214110234947 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214110234947 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214110234947 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 11:02:36.916006 run patchelf(pid=11317): Terminating (SIGINT) 11:02:37.101428 run patchelf(pid=11317): Terminated: ok {rc=0} 11:02:37.135736 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=11314): Process ended prematurely: osmo-stp_10.42.42.5(pid=11314) [trial-2403↪gprs:nanobts+band-900↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11314)] [trial-2403↪gprs:nanobts+band-900↪cs_paging_gprs_active.py:38] 11:02:37.146034 tst cs_paging_gprs_active.py:38: Test FAILED (8.9 sec) 11:02:37.210303 run osmo-hlr_10.42.42.2(pid=11311): ERR: Terminated: ERROR {rc=237} [trial-2403↪gprs:nanobts+band-900↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=11311)] 11:02:37.262615 run osmo-hlr_10.42.42.2(pid=11311): stdout: | (launched: 2022-12-14_11:02:33.741308) 11:02:37.315327 run osmo-hlr_10.42.42.2(pid=11311): stderr: | �[0;m�[1;31m20221214110233936 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214110233936 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214110233936 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214110233936 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214110233936 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214110233937 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214110233948 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2403/run.2022-12-14_09-52-37/gprs:nanobts+band-900/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214110233958 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214110233959 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214110233959 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 11:02:37.360311 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11304): Terminating (SIGTERM) 11:02:37.403453 run iperf3-srv_10.42.42.10(pid=11305): Terminating (SIGTERM) 11:02:37.445715 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11306): Terminating (SIGTERM) 11:02:37.488158 run iperf3-srv_10.42.42.10(pid=11307): Terminating (SIGTERM) 11:02:37.530584 run pcap-recorder_any(filters='host 10.42.42.2')(pid=11310): Terminating (SIGTERM) 11:02:37.573016 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=11313): Terminating (SIGTERM) 11:02:37.615051 run pcap-recorder_any(filters='host 10.42.42.6')(pid=11316): Terminating (SIGTERM) 11:02:37.624748 --- ParallelTerminationStrategy: PID 11304 died... 11:02:37.681137 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11304): Terminated: ok {rc=0} 11:02:37.691598 --- ParallelTerminationStrategy: PID 11305 died... 11:02:37.747433 run iperf3-srv_10.42.42.10(pid=11305): Terminated {rc=256} 11:02:37.757936 --- ParallelTerminationStrategy: PID 11306 died... 11:02:37.813723 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11306): Terminated: ok {rc=0} 11:02:37.823831 --- ParallelTerminationStrategy: PID 11307 died... 11:02:37.879423 run iperf3-srv_10.42.42.10(pid=11307): Terminated {rc=256} 11:02:37.889637 --- ParallelTerminationStrategy: PID 11310 died... 11:02:37.945375 run pcap-recorder_any(filters='host 10.42.42.2')(pid=11310): Terminated: ok {rc=0} 11:02:37.955853 --- ParallelTerminationStrategy: PID 11313 died... 11:02:38.011683 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=11313): Terminated: ok {rc=0} 11:02:38.021902 --- ParallelTerminationStrategy: PID 11316 died... 11:02:38.077689 run pcap-recorder_any(filters='host 10.42.42.6')(pid=11316): Terminated: ok {rc=0} 11:02:38.165108 bus /gobi_0: Setting Powered False 11:02:39.272806 bus /gobi_0: Setting Powered False 11:02:40.384600 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=11314): Process ended prematurely: osmo-stp_10.42.42.5(pid=11314) [trial-2403↪gprs:nanobts+band-900↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11314)]