Failed
gprs:oc2g+mod-bts0-dynts-ipa.cs_paging_gprs_active.py (from gprs_oc2g+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=5386): Process ended prematurely: osmo-stp_10.42.42.5(pid=5386) [trial-2403↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=5386)]
Standard Output
---------------------------------------------- trial-2403 gprs:oc2g+mod-bts0-dynts-ipa cs_paging_gprs_active.py ---------------------------------------------- 10:08:24.707208 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 10:08:24.718374 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 10:08:24.868463 tst cs_paging_gprs_active.py: using LAC 40190 10:08:24.994511 tst cs_paging_gprs_active.py: using RAC 155 10:08:25.123418 tst cs_paging_gprs_active.py: using CellId 40190 10:08:25.246775 tst cs_paging_gprs_active.py: using BVCI 40191 10:08:25.270334 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 10:08:25.281177 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 10:08:25.291873 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 10:08:25.302725 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 10:08:25.313976 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 10:08:25.325138 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 10:08:25.336056 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 10:08:25.346998 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 10:08:25.358303 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 10:08:25.479326 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 10:08:25.760912 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 10:08:25.887250 run iperf3-srv_10.42.42.10: Starting iperf3-srv 10:08:26.204338 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=5376): Launched 10:08:26.466710 run iperf3-srv_10.42.42.10(pid=5377): Launched 10:08:26.651983 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 10:08:26.778175 run iperf3-srv_10.42.42.10: Starting iperf3-srv 10:08:27.094029 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=5378): Launched 10:08:27.356844 run iperf3-srv_10.42.42.10(pid=5379): Launched 10:08:27.541721 tst cs_paging_gprs_active.py:38: start network... 10:08:27.667798 run osmo-hlr_10.42.42.2: Starting osmo-hlr 10:08:28.144771 run create_hlr_db(pid=5380): Launched 10:08:28.319418 bus /gobi_6: Setting Powered False 10:08:29.340876 run create_hlr_db(pid=5380): Terminated: ok {rc=0} 10:08:29.771423 run pcap-recorder_any(filters='host 10.42.42.2')(pid=5382): Launched 10:08:30.094876 run osmo-hlr_10.42.42.2(pid=5383): Launched 10:08:30.217024 run osmo-stp_10.42.42.5: Starting osmo-stp 10:08:30.779179 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=5385): Launched 10:08:31.230431 run osmo-stp_10.42.42.5(pid=5386): Launched 10:08:31.443948 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 10:08:32.030580 run pcap-recorder_any(filters='host 10.42.42.6')(pid=5388): Launched 10:08:32.148446 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 10:08:32.432169 run patchelf(pid=5389): Launched 10:08:32.622167 run osmo-stp_10.42.42.5(pid=5386): ERR: Terminated: ERROR {rc=1} [trial-2403↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=5386)] 10:08:32.761301 run osmo-stp_10.42.42.5(pid=5386): stdout: | (launched: 2022-12-14_10:08:30.968208) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 10:08:32.900348 run osmo-stp_10.42.42.5(pid=5386): stderr: | �[0;m�[38;5;43m20221214100831266 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214100831266 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214100831266 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214100831267 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214100831267 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214100831267 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214100831267 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 10:08:33.034145 run osmo-stp_10.42.42.5(pid=5386): stdout: | (launched: 2022-12-14_10:08:30.968208) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 10:08:33.167578 run osmo-stp_10.42.42.5(pid=5386): stderr: | �[0;m�[38;5;43m20221214100831266 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214100831266 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214100831266 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214100831267 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214100831267 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214100831267 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214100831267 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 10:08:33.323037 run patchelf(pid=5389): Terminating (SIGINT) 10:08:33.505965 run patchelf(pid=5389): Terminated: ok {rc=0} 10:08:33.539576 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=5386): Process ended prematurely: osmo-stp_10.42.42.5(pid=5386) [trial-2403↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=5386)] [trial-2403↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38] 10:08:33.549585 tst cs_paging_gprs_active.py:38: Test FAILED (8.9 sec) 10:08:33.612638 run osmo-hlr_10.42.42.2(pid=5383): ERR: Terminated: ERROR {rc=237} [trial-2403↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=5383)] 10:08:33.664176 run osmo-hlr_10.42.42.2(pid=5383): stdout: | (launched: 2022-12-14_10:08:29.935680) 10:08:33.716460 run osmo-hlr_10.42.42.2(pid=5383): stderr: | �[0;m�[1;31m20221214100830132 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214100830132 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214100830132 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214100830132 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214100830132 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214100830132 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214100830144 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2403/run.2022-12-14_09-52-37/gprs:oc2g+mod-bts0-dynts-ipa/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214100830152 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214100830153 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214100830153 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 10:08:33.760759 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=5376): Terminating (SIGTERM) 10:08:33.803571 run iperf3-srv_10.42.42.10(pid=5377): Terminating (SIGTERM) 10:08:33.845399 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=5378): Terminating (SIGTERM) 10:08:33.887462 run iperf3-srv_10.42.42.10(pid=5379): Terminating (SIGTERM) 10:08:33.929884 run pcap-recorder_any(filters='host 10.42.42.2')(pid=5382): Terminating (SIGTERM) 10:08:33.971694 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=5385): Terminating (SIGTERM) 10:08:34.013951 run pcap-recorder_any(filters='host 10.42.42.6')(pid=5388): Terminating (SIGTERM) 10:08:34.023625 --- ParallelTerminationStrategy: PID 5376 died... 10:08:34.080030 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=5376): Terminated: ok {rc=0} 10:08:34.090053 --- ParallelTerminationStrategy: PID 5377 died... 10:08:34.145505 run iperf3-srv_10.42.42.10(pid=5377): Terminated {rc=256} 10:08:34.155356 --- ParallelTerminationStrategy: PID 5378 died... 10:08:34.210606 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=5378): Terminated: ok {rc=0} 10:08:34.220493 --- ParallelTerminationStrategy: PID 5379 died... 10:08:34.275806 run iperf3-srv_10.42.42.10(pid=5379): Terminated {rc=256} 10:08:34.285697 --- ParallelTerminationStrategy: PID 5382 died... 10:08:34.341046 run pcap-recorder_any(filters='host 10.42.42.2')(pid=5382): Terminated: ok {rc=0} 10:08:34.351029 --- ParallelTerminationStrategy: PID 5385 died... 10:08:34.406228 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=5385): Terminated: ok {rc=0} 10:08:34.416109 --- ParallelTerminationStrategy: PID 5388 died... 10:08:34.471332 run pcap-recorder_any(filters='host 10.42.42.6')(pid=5388): Terminated: ok {rc=0} 10:08:34.558575 bus /gobi_0: Setting Powered False 10:08:35.664769 bus /gobi_0: Setting Powered False 10:08:36.773351 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=5386): Process ended prematurely: osmo-stp_10.42.42.5(pid=5386) [trial-2403↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=5386)]