Failed
gprs:oc2g+mod-bts0-egprs.cs_paging_gprs_active.py (from gprs_oc2g+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=5317): Process ended prematurely: osmo-stp_10.42.42.5(pid=5317) [trial-2403↪gprs:oc2g+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=5317)]
Standard Output
---------------------------------------------- trial-2403 gprs:oc2g+mod-bts0-egprs cs_paging_gprs_active.py ---------------------------------------------- 10:07:24.659306 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 10:07:24.670016 tst gprs:oc2g+mod-bts0-egprs: Using 1 x bts (candidates: 1) 10:07:24.794101 tst cs_paging_gprs_active.py: using LAC 40185 10:07:24.913127 tst cs_paging_gprs_active.py: using RAC 150 10:07:25.030950 tst cs_paging_gprs_active.py: using CellId 40185 10:07:25.151692 tst cs_paging_gprs_active.py: using BVCI 40186 10:07:25.174708 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 10:07:25.185420 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 10:07:25.195791 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 10:07:25.206399 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 10:07:25.217043 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 10:07:25.228170 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 10:07:25.239481 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 10:07:25.250287 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 10:07:25.261340 tst gprs:oc2g+mod-bts0-egprs: Using 1 x modem (candidates: 4) 10:07:25.379938 tst gprs:oc2g+mod-bts0-egprs: Using 1 x modem (candidates: 4) 10:07:25.671136 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 10:07:25.805461 run iperf3-srv_10.42.42.10: Starting iperf3-srv 10:07:26.139545 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=5307): Launched 10:07:26.417289 run iperf3-srv_10.42.42.10(pid=5308): Launched 10:07:26.613213 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 10:07:26.746440 run iperf3-srv_10.42.42.10: Starting iperf3-srv 10:07:27.080699 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=5309): Launched 10:07:27.357816 run iperf3-srv_10.42.42.10(pid=5310): Launched 10:07:27.553973 tst cs_paging_gprs_active.py:38: start network... 10:07:27.687421 run osmo-hlr_10.42.42.2: Starting osmo-hlr 10:07:28.204205 run create_hlr_db(pid=5311): Launched 10:07:28.390480 bus /gobi_6: Setting Powered False 10:07:29.412024 run create_hlr_db(pid=5311): Terminated: ok {rc=0} 10:07:29.820302 run pcap-recorder_any(filters='host 10.42.42.2')(pid=5313): Launched 10:07:30.123491 run osmo-hlr_10.42.42.2(pid=5314): Launched 10:07:30.235308 run osmo-stp_10.42.42.5: Starting osmo-stp 10:07:30.761205 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=5316): Launched 10:07:31.300205 run osmo-stp_10.42.42.5(pid=5317): Launched 10:07:31.600501 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 10:07:32.207201 run pcap-recorder_any(filters='host 10.42.42.6')(pid=5319): Launched 10:07:32.317133 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 10:07:32.584027 run patchelf(pid=5320): Launched 10:07:32.761708 run osmo-stp_10.42.42.5(pid=5317): ERR: Terminated: ERROR {rc=1} [trial-2403↪gprs:oc2g+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=5317)] 10:07:32.891621 run osmo-stp_10.42.42.5(pid=5317): stdout: | (launched: 2022-12-14_10:07:30.936359) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 10:07:33.022585 run osmo-stp_10.42.42.5(pid=5317): stderr: | �[0;m�[38;5;43m20221214100731253 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214100731254 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214100731255 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214100731255 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214100731258 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214100731258 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214100731258 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 10:07:33.147553 run osmo-stp_10.42.42.5(pid=5317): stdout: | (launched: 2022-12-14_10:07:30.936359) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 10:07:33.271703 run osmo-stp_10.42.42.5(pid=5317): stderr: | �[0;m�[38;5;43m20221214100731253 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214100731254 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214100731255 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214100731255 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214100731258 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214100731258 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214100731258 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 10:07:33.416710 run patchelf(pid=5320): Terminating (SIGINT) 10:07:33.587178 run patchelf(pid=5320): Terminated: ok {rc=0} 10:07:33.618651 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=5317): Process ended prematurely: osmo-stp_10.42.42.5(pid=5317) [trial-2403↪gprs:oc2g+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=5317)] [trial-2403↪gprs:oc2g+mod-bts0-egprs↪cs_paging_gprs_active.py:38] 10:07:33.628073 tst cs_paging_gprs_active.py:38: Test FAILED (9.0 sec) 10:07:33.688425 run osmo-hlr_10.42.42.2(pid=5314): ERR: Terminated: ERROR {rc=237} [trial-2403↪gprs:oc2g+mod-bts0-egprs↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=5314)] 10:07:33.737378 run osmo-hlr_10.42.42.2(pid=5314): stdout: | (launched: 2022-12-14_10:07:29.974220) 10:07:33.787769 run osmo-hlr_10.42.42.2(pid=5314): stderr: | �[0;m�[1;31m20221214100730149 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214100730149 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214100730149 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214100730149 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214100730149 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214100730149 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214100730161 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2403/run.2022-12-14_09-52-37/gprs:oc2g+mod-bts0-egprs/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214100730169 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214100730170 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214100730170 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 10:07:33.831107 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=5307): Terminating (SIGTERM) 10:07:33.871562 run iperf3-srv_10.42.42.10(pid=5308): Terminating (SIGTERM) 10:07:33.911968 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=5309): Terminating (SIGTERM) 10:07:33.952783 run iperf3-srv_10.42.42.10(pid=5310): Terminating (SIGTERM) 10:07:33.993660 run pcap-recorder_any(filters='host 10.42.42.2')(pid=5313): Terminating (SIGTERM) 10:07:34.034220 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=5316): Terminating (SIGTERM) 10:07:34.074805 run pcap-recorder_any(filters='host 10.42.42.6')(pid=5319): Terminating (SIGTERM) 10:07:34.083911 --- ParallelTerminationStrategy: PID 5307 died... 10:07:34.138154 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=5307): Terminated: ok {rc=0} 10:07:34.147806 --- ParallelTerminationStrategy: PID 5308 died... 10:07:34.201317 run iperf3-srv_10.42.42.10(pid=5308): Terminated {rc=256} 10:07:34.210782 --- ParallelTerminationStrategy: PID 5309 died... 10:07:34.264212 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=5309): Terminated: ok {rc=0} 10:07:34.273862 --- ParallelTerminationStrategy: PID 5310 died... 10:07:34.327118 run iperf3-srv_10.42.42.10(pid=5310): Terminated {rc=256} 10:07:34.336542 --- ParallelTerminationStrategy: PID 5313 died... 10:07:34.390147 run pcap-recorder_any(filters='host 10.42.42.2')(pid=5313): Terminated: ok {rc=0} 10:07:34.399654 --- ParallelTerminationStrategy: PID 5316 died... 10:07:34.453549 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=5316): Terminated: ok {rc=0} 10:07:34.463108 --- ParallelTerminationStrategy: PID 5319 died... 10:07:34.517396 run pcap-recorder_any(filters='host 10.42.42.6')(pid=5319): Terminated: ok {rc=0} 10:07:34.606078 bus /gobi_0: Setting Powered False 10:07:35.710193 bus /gobi_0: Setting Powered False 10:07:36.822082 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=5317): Process ended prematurely: osmo-stp_10.42.42.5(pid=5317) [trial-2403↪gprs:oc2g+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=5317)]