Failed
gprs:trx-umtrx+mod-bts0-dynts-ipa.cs_paging_gprs_active.py (from gprs_trx-umtrx+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=8795): Process ended prematurely: osmo-stp_10.42.42.5(pid=8795) [trial-2403↪gprs:trx-umtrx+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8795)]
Standard Output
---------------------------------------------- trial-2403 gprs:trx-umtrx+mod-bts0-dynts-ipa cs_paging_gprs_active.py ---------------------------------------------- 10:34:12.722596 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 10:34:12.733481 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 10:34:12.892030 tst cs_paging_gprs_active.py: using LAC 40327 10:34:13.014065 tst cs_paging_gprs_active.py: using RAC 37 10:34:13.135255 tst cs_paging_gprs_active.py: using CellId 40327 10:34:13.257230 tst cs_paging_gprs_active.py: using BVCI 40328 10:34:13.280620 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 10:34:13.291444 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 10:34:13.302185 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 10:34:13.312841 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 10:34:13.324347 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 10:34:13.335433 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 10:34:13.346491 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 10:34:13.357439 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 10:34:13.368467 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 10:34:13.486434 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 10:34:13.786524 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 10:34:13.924875 run iperf3-srv_10.42.42.10: Starting iperf3-srv 10:34:14.268407 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8785): Launched 10:34:14.553857 run iperf3-srv_10.42.42.10(pid=8786): Launched 10:34:14.754903 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 10:34:14.892488 run iperf3-srv_10.42.42.10: Starting iperf3-srv 10:34:15.234500 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8787): Launched 10:34:15.518055 run iperf3-srv_10.42.42.10(pid=8788): Launched 10:34:15.720240 tst cs_paging_gprs_active.py:38: start network... 10:34:15.859943 run osmo-hlr_10.42.42.2: Starting osmo-hlr 10:34:16.518032 run create_hlr_db(pid=8789): Launched 10:34:16.713503 bus /gobi_6: Setting Powered False 10:34:17.731673 run create_hlr_db(pid=8789): Terminated: ok {rc=0} 10:34:18.148255 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8791): Launched 10:34:18.456866 run osmo-hlr_10.42.42.2(pid=8792): Launched 10:34:18.573568 run osmo-stp_10.42.42.5: Starting osmo-stp 10:34:19.110260 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8794): Launched 10:34:19.421511 run osmo-stp_10.42.42.5(pid=8795): Launched 10:34:19.532938 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 10:34:20.072439 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8797): Launched 10:34:20.182063 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 10:34:20.460584 run patchelf(pid=8798): Launched 10:34:20.643059 run osmo-stp_10.42.42.5(pid=8795): ERR: Terminated: ERROR {rc=1} [trial-2403↪gprs:trx-umtrx+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8795)] 10:34:20.775699 run osmo-stp_10.42.42.5(pid=8795): stdout: | (launched: 2022-12-14_10:34:19.266443) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 10:34:20.908760 run osmo-stp_10.42.42.5(pid=8795): stderr: | �[0;m�[38;5;43m20221214103419437 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214103419437 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214103419437 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214103419438 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214103419438 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214103419438 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214103419439 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 10:34:21.036473 run osmo-stp_10.42.42.5(pid=8795): stdout: | (launched: 2022-12-14_10:34:19.266443) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 10:34:21.163774 run osmo-stp_10.42.42.5(pid=8795): stderr: | �[0;m�[38;5;43m20221214103419437 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214103419437 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214103419437 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214103419438 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214103419438 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214103419438 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214103419439 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 10:34:21.311732 run patchelf(pid=8798): Terminating (SIGINT) 10:34:21.486371 run patchelf(pid=8798): Terminated: ok {rc=0} 10:34:21.518404 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=8795): Process ended prematurely: osmo-stp_10.42.42.5(pid=8795) [trial-2403↪gprs:trx-umtrx+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8795)] [trial-2403↪gprs:trx-umtrx+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38] 10:34:21.527873 tst cs_paging_gprs_active.py:38: Test FAILED (8.8 sec) 10:34:21.589191 run osmo-hlr_10.42.42.2(pid=8792): ERR: Terminated: ERROR {rc=237} [trial-2403↪gprs:trx-umtrx+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=8792)] 10:34:21.639054 run osmo-hlr_10.42.42.2(pid=8792): stdout: | (launched: 2022-12-14_10:34:18.304813) 10:34:21.689505 run osmo-hlr_10.42.42.2(pid=8792): stderr: | �[0;m�[1;31m20221214103418481 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214103418481 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214103418481 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214103418481 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214103418481 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214103418481 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214103418492 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2403/run.2022-12-14_09-52-37/gprs:trx-umtrx+mod-bts0-dynts-ipa/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214103418500 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214103418501 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214103418501 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 10:34:21.732402 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8785): Terminating (SIGTERM) 10:34:21.773200 run iperf3-srv_10.42.42.10(pid=8786): Terminating (SIGTERM) 10:34:21.813599 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8787): Terminating (SIGTERM) 10:34:21.853799 run iperf3-srv_10.42.42.10(pid=8788): Terminating (SIGTERM) 10:34:21.893984 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8791): Terminating (SIGTERM) 10:34:21.934161 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8794): Terminating (SIGTERM) 10:34:21.974366 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8797): Terminating (SIGTERM) 10:34:21.983611 --- ParallelTerminationStrategy: PID 8785 died... 10:34:22.038082 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8785): Terminated: ok {rc=0} 10:34:22.047738 --- ParallelTerminationStrategy: PID 8786 died... 10:34:22.101673 run iperf3-srv_10.42.42.10(pid=8786): Terminated {rc=256} 10:34:22.111373 --- ParallelTerminationStrategy: PID 8787 died... 10:34:22.165501 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8787): Terminated: ok {rc=0} 10:34:22.175195 --- ParallelTerminationStrategy: PID 8788 died... 10:34:22.229032 run iperf3-srv_10.42.42.10(pid=8788): Terminated {rc=256} 10:34:22.238658 --- ParallelTerminationStrategy: PID 8791 died... 10:34:22.292562 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8791): Terminated: ok {rc=0} 10:34:22.302241 --- ParallelTerminationStrategy: PID 8794 died... 10:34:22.356123 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8794): Terminated: ok {rc=0} 10:34:22.365878 --- ParallelTerminationStrategy: PID 8797 died... 10:34:22.419551 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8797): Terminated: ok {rc=0} 10:34:22.504227 bus /gobi_0: Setting Powered False 10:34:23.607027 bus /gobi_0: Setting Powered False 10:34:24.720016 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=8795): Process ended prematurely: osmo-stp_10.42.42.5(pid=8795) [trial-2403↪gprs:trx-umtrx+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8795)]