Failed
gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend.iperf3m4.py (from gprs_nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend)
Stacktrace
osmo-stp_10.42.42.5(pid=23151): Process ended prematurely: osmo-stp_10.42.42.5(pid=23151) [trial-2404↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3m4.py:8↪iperf3m4.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=23151)]
Standard Output
---------------------------------------------- trial-2404 gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend iperf3m4.py ---------------------------------------------- 12:38:58.954110 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 12:38:58.966130 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x bts (candidates: 1) 12:38:59.103538 tst iperf3m4.py: using LAC 40955 12:38:59.225279 tst iperf3m4.py: using RAC 155 12:38:59.340616 tst iperf3m4.py: using CellId 40955 12:38:59.458902 tst iperf3m4.py: using BVCI 40956 12:38:59.481966 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 12:38:59.493405 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 12:38:59.504805 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 12:38:59.516010 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 12:38:59.527592 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 12:38:59.539141 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 12:38:59.550990 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 12:38:59.562668 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 12:38:59.574617 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 12:38:59.696274 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 12:38:59.814504 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 12:38:59.931541 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 12:39:00.209827 tst iperf3m4.py:8: start iperfv3 server 10.42.42.10:5003... 12:39:00.334712 run iperf3-srv_10.42.42.10: Starting iperf3-srv 12:39:00.647177 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=22865): Launched 12:39:00.940758 run iperf3-srv_10.42.42.10(pid=22866): Launched 12:39:01.135463 tst iperf3m4.py:8: start iperfv3 server 10.42.42.10:5004... 12:39:01.265679 run iperf3-srv_10.42.42.10: Starting iperf3-srv 12:39:01.623869 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=22867): Launched 12:39:02.066001 run iperf3-srv_10.42.42.10(pid=22880): Launched 12:39:02.316207 tst iperf3m4.py:8: start iperfv3 server 10.42.42.10:5005... 12:39:02.477827 run iperf3-srv_10.42.42.10: Starting iperf3-srv 12:39:02.864837 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=22917): Launched 12:39:03.209692 run iperf3-srv_10.42.42.10(pid=22930): Launched 12:39:03.445983 tst iperf3m4.py:8: start iperfv3 server 10.42.42.10:5006... 12:39:03.620044 run iperf3-srv_10.42.42.10: Starting iperf3-srv 12:39:04.045778 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=23031): Launched 12:39:04.425482 run iperf3-srv_10.42.42.10(pid=23076): Launched 12:39:04.652823 tst iperf3m4.py:8: start network... 12:39:04.826222 run osmo-hlr_10.42.42.2: Starting osmo-hlr 12:39:05.367439 run create_hlr_db(pid=23143): Launched 12:39:05.545091 bus /gobi_6: Setting Powered False 12:39:06.568845 run create_hlr_db(pid=23143): Terminated: ok {rc=0} 12:39:07.001711 run pcap-recorder_any(filters='host 10.42.42.2')(pid=23146): Launched 12:39:07.432058 run osmo-hlr_10.42.42.2(pid=23148): Launched 12:39:07.662169 run osmo-stp_10.42.42.5: Starting osmo-stp 12:39:08.274214 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=23150): Launched 12:39:08.699264 run osmo-stp_10.42.42.5(pid=23151): Launched 12:39:08.907070 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 12:39:09.490487 run pcap-recorder_any(filters='host 10.42.42.6')(pid=23153): Launched 12:39:09.609952 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 12:39:09.912007 run patchelf(pid=23154): Launched 12:39:10.105137 run osmo-stp_10.42.42.5(pid=23151): ERR: Terminated: ERROR {rc=1} [trial-2404↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3m4.py:8↪iperf3m4.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=23151)] 12:39:10.249525 run osmo-stp_10.42.42.5(pid=23151): stdout: | (launched: 2022-12-14_12:39:08.431674) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 12:39:10.391937 run osmo-stp_10.42.42.5(pid=23151): stderr: | �[0;m�[38;5;43m20221214123908717 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214123908717 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214123908717 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214123908718 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214123908718 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214123908718 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214123908718 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 12:39:10.529493 run osmo-stp_10.42.42.5(pid=23151): stdout: | (launched: 2022-12-14_12:39:08.431674) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 12:39:10.665991 run osmo-stp_10.42.42.5(pid=23151): stderr: | �[0;m�[38;5;43m20221214123908717 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214123908717 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214123908717 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214123908718 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214123908718 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214123908718 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214123908718 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 12:39:10.824523 run patchelf(pid=23154): Terminating (SIGINT) 12:39:11.010286 run patchelf(pid=23154): Terminated: ok {rc=0} 12:39:11.045965 tst iperf3m4.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=23151): Process ended prematurely: osmo-stp_10.42.42.5(pid=23151) [trial-2404↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3m4.py:8↪iperf3m4.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=23151)] [trial-2404↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3m4.py:8] 12:39:11.057366 tst iperf3m4.py:8: Test FAILED (12.1 sec) 12:39:11.122912 run osmo-hlr_10.42.42.2(pid=23148): ERR: Terminated: ERROR {rc=237} [trial-2404↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3m4.py↪iperf3m4.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=23148)] 12:39:11.175836 run osmo-hlr_10.42.42.2(pid=23148): stdout: | (launched: 2022-12-14_12:39:07.167839) 12:39:11.230887 run osmo-hlr_10.42.42.2(pid=23148): stderr: | �[0;m�[1;31m20221214123907495 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214123907495 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214123907495 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214123907495 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214123907495 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214123907495 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214123907511 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2404/run.2022-12-14_11-25-45/gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend/iperf3m4.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214123907523 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214123907524 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214123907524 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 12:39:11.276649 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=22865): Terminating (SIGTERM) 12:39:11.322584 run iperf3-srv_10.42.42.10(pid=22866): Terminating (SIGTERM) 12:39:11.367987 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=22867): Terminating (SIGTERM) 12:39:11.412154 run iperf3-srv_10.42.42.10(pid=22880): Terminating (SIGTERM) 12:39:11.458523 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=22917): Terminating (SIGTERM) 12:39:11.503605 run iperf3-srv_10.42.42.10(pid=22930): Terminating (SIGTERM) 12:39:11.548923 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=23031): Terminating (SIGTERM) 12:39:11.595052 run iperf3-srv_10.42.42.10(pid=23076): Terminating (SIGTERM) 12:39:11.640638 run pcap-recorder_any(filters='host 10.42.42.2')(pid=23146): Terminating (SIGTERM) 12:39:11.684741 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=23150): Terminating (SIGTERM) 12:39:11.731809 run pcap-recorder_any(filters='host 10.42.42.6')(pid=23153): Terminating (SIGTERM) 12:39:11.742813 --- ParallelTerminationStrategy: PID 22865 died... 12:39:11.802093 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=22865): Terminated: ok {rc=0} 12:39:11.813556 --- ParallelTerminationStrategy: PID 22866 died... 12:39:11.870899 run iperf3-srv_10.42.42.10(pid=22866): Terminated {rc=256} 12:39:11.884471 --- ParallelTerminationStrategy: PID 22867 died... 12:39:11.980087 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=22867): Terminated: ok {rc=0} 12:39:11.994908 --- ParallelTerminationStrategy: PID 22880 died... 12:39:12.056394 run iperf3-srv_10.42.42.10(pid=22880): Terminated {rc=256} 12:39:12.066955 --- ParallelTerminationStrategy: PID 22917 died... 12:39:12.123756 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=22917): Terminated: ok {rc=0} 12:39:12.134369 --- ParallelTerminationStrategy: PID 22930 died... 12:39:12.191560 run iperf3-srv_10.42.42.10(pid=22930): Terminated {rc=256} 12:39:12.202457 --- ParallelTerminationStrategy: PID 23031 died... 12:39:12.259491 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=23031): Terminated: ok {rc=0} 12:39:12.270085 --- ParallelTerminationStrategy: PID 23076 died... 12:39:12.327200 run iperf3-srv_10.42.42.10(pid=23076): Terminated {rc=256} 12:39:12.337990 --- ParallelTerminationStrategy: PID 23146 died... 12:39:12.395300 run pcap-recorder_any(filters='host 10.42.42.2')(pid=23146): Terminated: ok {rc=0} 12:39:12.405910 --- ParallelTerminationStrategy: PID 23150 died... 12:39:12.463705 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=23150): Terminated: ok {rc=0} 12:39:12.474431 --- ParallelTerminationStrategy: PID 23153 died... 12:39:12.535160 run pcap-recorder_any(filters='host 10.42.42.6')(pid=23153): Terminated: ok {rc=0} 12:39:12.626203 bus /gobi_4: Setting Powered False 12:39:13.738162 bus /gobi_4: Setting Powered False 12:39:14.853379 bus /gobi_1: Setting Powered False 12:39:16.000717 bus /gobi_1: Setting Powered False 12:39:17.159302 bus /gobi_0: Setting Powered False 12:39:18.273662 bus /gobi_0: Setting Powered False 12:39:19.390440 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3m4.py", line 8, in <module> setup_run_iperf3_test_parallel(4) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=23151): Process ended prematurely: osmo-stp_10.42.42.5(pid=23151) [trial-2404↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3m4.py:8↪iperf3m4.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=23151)]