Failed
gprs:oc2g+mod-bts0-dynts-osmo.ping_idle_ping.py (from gprs_oc2g+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=17619): Process ended prematurely: osmo-stp_10.42.42.5(pid=17619) [trial-2404↪gprs:oc2g+mod-bts0-dynts-osmo↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=17619)]
Standard Output
---------------------------------------------- trial-2404 gprs:oc2g+mod-bts0-dynts-osmo ping_idle_ping.py ---------------------------------------------- 11:43:25.726138 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 11:43:25.737941 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 11:43:25.884522 tst ping_idle_ping.py: using LAC 40660 11:43:26.004189 tst ping_idle_ping.py: using RAC 115 11:43:26.124239 tst ping_idle_ping.py: using CellId 40660 11:43:26.249813 tst ping_idle_ping.py: using BVCI 40661 11:43:26.274786 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 11:43:26.286476 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 11:43:26.297946 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 11:43:26.309435 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 11:43:26.320812 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 11:43:26.332103 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 11:43:26.343512 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 11:43:26.354854 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 11:43:26.635196 tst ping_idle_ping.py:24: start network... 11:43:26.761764 run osmo-hlr_10.42.42.2: Starting osmo-hlr 11:43:27.246780 run create_hlr_db(pid=17613): Launched 11:43:27.421258 bus /gobi_6: Setting Powered False 11:43:28.442890 run create_hlr_db(pid=17613): Terminated: ok {rc=0} 11:43:28.875907 run pcap-recorder_any(filters='host 10.42.42.2')(pid=17615): Launched 11:43:29.201659 run osmo-hlr_10.42.42.2(pid=17616): Launched 11:43:29.319132 run osmo-stp_10.42.42.5: Starting osmo-stp 11:43:29.882659 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=17618): Launched 11:43:30.207738 run osmo-stp_10.42.42.5(pid=17619): Launched 11:43:30.325149 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 11:43:30.936935 run pcap-recorder_any(filters='host 10.42.42.6')(pid=17621): Launched 11:43:31.055867 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 11:43:31.380992 run patchelf(pid=17622): Launched 11:43:31.579679 run osmo-stp_10.42.42.5(pid=17619): ERR: Terminated: ERROR {rc=1} [trial-2404↪gprs:oc2g+mod-bts0-dynts-osmo↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=17619)] 11:43:31.717575 run osmo-stp_10.42.42.5(pid=17619): stdout: | (launched: 2022-12-14_11:43:30.047945) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 11:43:31.856184 run osmo-stp_10.42.42.5(pid=17619): stderr: | �[0;m�[38;5;43m20221214114330239 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214114330239 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214114330240 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214114330240 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214114330241 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214114330241 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214114330241 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 11:43:32.019599 run osmo-stp_10.42.42.5(pid=17619): stdout: | (launched: 2022-12-14_11:43:30.047945) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 11:43:32.149989 run osmo-stp_10.42.42.5(pid=17619): stderr: | �[0;m�[38;5;43m20221214114330239 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214114330239 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214114330240 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214114330240 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214114330241 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214114330241 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214114330241 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 11:43:32.298409 run patchelf(pid=17622): Terminating (SIGINT) 11:43:32.470139 run patchelf(pid=17622): Terminated: ok {rc=0} 11:43:32.501372 tst ping_idle_ping.py:27: ERR: Error: osmo-stp_10.42.42.5(pid=17619): Process ended prematurely: osmo-stp_10.42.42.5(pid=17619) [trial-2404↪gprs:oc2g+mod-bts0-dynts-osmo↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=17619)] [trial-2404↪gprs:oc2g+mod-bts0-dynts-osmo↪ping_idle_ping.py:27] 11:43:32.510382 tst ping_idle_ping.py:27: Test FAILED (6.8 sec) 11:43:32.572113 run osmo-hlr_10.42.42.2(pid=17616): ERR: Terminated: ERROR {rc=237} [trial-2404↪gprs:oc2g+mod-bts0-dynts-osmo↪ping_idle_ping.py↪ping_idle_ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=17616)] 11:43:32.622946 run osmo-hlr_10.42.42.2(pid=17616): stdout: | (launched: 2022-12-14_11:43:29.041390) 11:43:32.674377 run osmo-hlr_10.42.42.2(pid=17616): stderr: | �[0;m�[1;31m20221214114329240 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214114329240 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214114329240 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214114329240 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214114329240 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214114329240 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214114329255 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2404/run.2022-12-14_11-25-45/gprs:oc2g+mod-bts0-dynts-osmo/ping_idle_ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214114329264 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214114329265 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214114329265 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 11:43:32.718344 run pcap-recorder_any(filters='host 10.42.42.2')(pid=17615): Terminating (SIGTERM) 11:43:32.760548 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=17618): Terminating (SIGTERM) 11:43:32.801633 run pcap-recorder_any(filters='host 10.42.42.6')(pid=17621): Terminating (SIGTERM) 11:43:32.811300 --- ParallelTerminationStrategy: PID 17615 died... 11:43:32.866256 run pcap-recorder_any(filters='host 10.42.42.2')(pid=17615): Terminated: ok {rc=0} 11:43:32.875927 --- ParallelTerminationStrategy: PID 17618 died... 11:43:32.930650 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=17618): Terminated: ok {rc=0} 11:43:32.940433 --- ParallelTerminationStrategy: PID 17621 died... 11:43:32.994977 run pcap-recorder_any(filters='host 10.42.42.6')(pid=17621): Terminated: ok {rc=0} 11:43:33.084288 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping_idle_ping.py", line 27, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=17619): Process ended prematurely: osmo-stp_10.42.42.5(pid=17619) [trial-2404↪gprs:oc2g+mod-bts0-dynts-osmo↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=17619)]