Failed
gprs:sysmo+mod-bts0-dynts-ipa.cs_paging_gprs_active.py (from gprs_sysmo+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=16672): Process ended prematurely: osmo-stp_10.42.42.5(pid=16672) [trial-2404↪gprs:sysmo+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=16672)]
Standard Output
---------------------------------------------- trial-2404 gprs:sysmo+mod-bts0-dynts-ipa cs_paging_gprs_active.py ---------------------------------------------- 11:33:37.546067 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 11:33:37.557302 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 11:33:37.710047 tst cs_paging_gprs_active.py: using LAC 40609 11:33:37.839110 tst cs_paging_gprs_active.py: using RAC 64 11:33:37.969889 tst cs_paging_gprs_active.py: using CellId 40609 11:33:38.100521 tst cs_paging_gprs_active.py: using BVCI 40610 11:33:38.125817 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 11:33:38.137183 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 11:33:38.148350 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 11:33:38.159502 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 11:33:38.170630 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 11:33:38.181838 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 11:33:38.193181 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 11:33:38.204191 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 11:33:38.215561 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 11:33:38.335444 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 11:33:38.616924 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 11:33:38.744313 run iperf3-srv_10.42.42.10: Starting iperf3-srv 11:33:39.070204 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16662): Launched 11:33:39.354918 run iperf3-srv_10.42.42.10(pid=16663): Launched 11:33:39.555733 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 11:33:39.693046 run iperf3-srv_10.42.42.10: Starting iperf3-srv 11:33:40.035708 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16664): Launched 11:33:40.319234 run iperf3-srv_10.42.42.10(pid=16665): Launched 11:33:40.519746 tst cs_paging_gprs_active.py:38: start network... 11:33:40.657013 run osmo-hlr_10.42.42.2: Starting osmo-hlr 11:33:41.183151 run create_hlr_db(pid=16666): Launched 11:33:41.373166 bus /gobi_6: Setting Powered False 11:33:42.394395 run create_hlr_db(pid=16666): Terminated: ok {rc=0} 11:33:42.833544 run pcap-recorder_any(filters='host 10.42.42.2')(pid=16668): Launched 11:33:43.163832 run osmo-hlr_10.42.42.2(pid=16669): Launched 11:33:43.286930 run osmo-stp_10.42.42.5: Starting osmo-stp 11:33:43.859808 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=16671): Launched 11:33:44.188514 run osmo-stp_10.42.42.5(pid=16672): Launched 11:33:44.307281 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 11:33:44.883603 run pcap-recorder_any(filters='host 10.42.42.6')(pid=16674): Launched 11:33:45.001140 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 11:33:45.288770 run patchelf(pid=16675): Launched 11:33:45.480920 run osmo-stp_10.42.42.5(pid=16672): ERR: Terminated: ERROR {rc=1} [trial-2404↪gprs:sysmo+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=16672)] 11:33:45.622108 run osmo-stp_10.42.42.5(pid=16672): stdout: | (launched: 2022-12-14_11:33:44.027609) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 11:33:45.763374 run osmo-stp_10.42.42.5(pid=16672): stderr: | �[0;m�[38;5;43m20221214113344218 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214113344218 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214113344219 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214113344219 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214113344220 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214113344220 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214113344220 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 11:33:45.924525 run osmo-stp_10.42.42.5(pid=16672): stdout: | (launched: 2022-12-14_11:33:44.027609) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 11:33:46.055931 run osmo-stp_10.42.42.5(pid=16672): stderr: | �[0;m�[38;5;43m20221214113344218 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214113344218 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214113344219 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214113344219 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214113344220 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214113344220 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214113344220 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 11:33:46.208913 run patchelf(pid=16675): Terminating (SIGINT) 11:33:46.389812 run patchelf(pid=16675): Terminated: ok {rc=0} 11:33:46.423183 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=16672): Process ended prematurely: osmo-stp_10.42.42.5(pid=16672) [trial-2404↪gprs:sysmo+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=16672)] [trial-2404↪gprs:sysmo+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38] 11:33:46.433781 tst cs_paging_gprs_active.py:38: Test FAILED (8.9 sec) 11:33:46.498391 run osmo-hlr_10.42.42.2(pid=16669): ERR: Terminated: ERROR {rc=237} [trial-2404↪gprs:sysmo+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=16669)] 11:33:46.550993 run osmo-hlr_10.42.42.2(pid=16669): stdout: | (launched: 2022-12-14_11:33:43.001294) 11:33:46.604090 run osmo-hlr_10.42.42.2(pid=16669): stderr: | �[0;m�[1;31m20221214113343198 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214113343199 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214113343199 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214113343199 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214113343199 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214113343199 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214113343212 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2404/run.2022-12-14_11-25-45/gprs:sysmo+mod-bts0-dynts-ipa/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214113343222 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214113343223 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214113343223 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 11:33:46.649889 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16662): Terminating (SIGTERM) 11:33:46.695134 run iperf3-srv_10.42.42.10(pid=16663): Terminating (SIGTERM) 11:33:46.740262 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16664): Terminating (SIGTERM) 11:33:46.784704 run iperf3-srv_10.42.42.10(pid=16665): Terminating (SIGTERM) 11:33:46.829884 run pcap-recorder_any(filters='host 10.42.42.2')(pid=16668): Terminating (SIGTERM) 11:33:46.872348 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=16671): Terminating (SIGTERM) 11:33:46.919326 run pcap-recorder_any(filters='host 10.42.42.6')(pid=16674): Terminating (SIGTERM) 11:33:46.929879 --- ParallelTerminationStrategy: PID 16662 died... 11:33:46.988895 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16662): Terminated: ok {rc=0} 11:33:46.999450 --- ParallelTerminationStrategy: PID 16663 died... 11:33:47.056212 run iperf3-srv_10.42.42.10(pid=16663): Terminated {rc=256} 11:33:47.066802 --- ParallelTerminationStrategy: PID 16664 died... 11:33:47.124768 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16664): Terminated: ok {rc=0} 11:33:47.135156 --- ParallelTerminationStrategy: PID 16665 died... 11:33:47.191528 run iperf3-srv_10.42.42.10(pid=16665): Terminated {rc=256} 11:33:47.201407 --- ParallelTerminationStrategy: PID 16668 died... 11:33:47.256073 run pcap-recorder_any(filters='host 10.42.42.2')(pid=16668): Terminated: ok {rc=0} 11:33:47.265697 --- ParallelTerminationStrategy: PID 16671 died... 11:33:47.323383 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=16671): Terminated: ok {rc=0} 11:33:47.334032 --- ParallelTerminationStrategy: PID 16674 died... 11:33:47.389409 run pcap-recorder_any(filters='host 10.42.42.6')(pid=16674): Terminated: ok {rc=0} 11:33:47.475758 bus /gobi_0: Setting Powered False 11:33:48.579851 bus /gobi_0: Setting Powered False 11:33:49.691661 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=16672): Process ended prematurely: osmo-stp_10.42.42.5(pid=16672) [trial-2404↪gprs:sysmo+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=16672)]