Failed
gprs:sysmo+mod-bts0-egprs.cs_paging_gprs_active.py (from gprs_sysmo+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=16602): Process ended prematurely: osmo-stp_10.42.42.5(pid=16602) [trial-2404↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=16602)]
Standard Output
---------------------------------------------- trial-2404 gprs:sysmo+mod-bts0-egprs cs_paging_gprs_active.py ---------------------------------------------- 11:32:37.074830 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 11:32:37.086070 tst gprs:sysmo+mod-bts0-egprs: Using 1 x bts (candidates: 1) 11:32:37.218742 tst cs_paging_gprs_active.py: using LAC 40604 11:32:37.346551 tst cs_paging_gprs_active.py: using RAC 59 11:32:37.473635 tst cs_paging_gprs_active.py: using CellId 40604 11:32:37.595814 tst cs_paging_gprs_active.py: using BVCI 40605 11:32:37.619366 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 11:32:37.630306 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 11:32:37.641207 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 11:32:37.651960 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 11:32:37.662784 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 11:32:37.673633 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 11:32:37.684503 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 11:32:37.695317 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 11:32:37.706401 tst gprs:sysmo+mod-bts0-egprs: Using 1 x modem (candidates: 4) 11:32:37.827407 tst gprs:sysmo+mod-bts0-egprs: Using 1 x modem (candidates: 4) 11:32:38.111108 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 11:32:38.238758 run iperf3-srv_10.42.42.10: Starting iperf3-srv 11:32:38.557183 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16592): Launched 11:32:38.821332 run iperf3-srv_10.42.42.10(pid=16593): Launched 11:32:39.007785 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 11:32:39.135165 run iperf3-srv_10.42.42.10: Starting iperf3-srv 11:32:39.453943 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16594): Launched 11:32:39.719741 run iperf3-srv_10.42.42.10(pid=16595): Launched 11:32:39.906417 tst cs_paging_gprs_active.py:38: start network... 11:32:40.034006 run osmo-hlr_10.42.42.2: Starting osmo-hlr 11:32:40.518206 run create_hlr_db(pid=16596): Launched 11:32:40.694325 bus /gobi_6: Setting Powered False 11:32:41.729623 run create_hlr_db(pid=16596): Terminated: ok {rc=0} 11:32:42.170921 run pcap-recorder_any(filters='host 10.42.42.2')(pid=16598): Launched 11:32:42.502034 run osmo-hlr_10.42.42.2(pid=16599): Launched 11:32:42.624606 run osmo-stp_10.42.42.5: Starting osmo-stp 11:32:43.200049 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=16601): Launched 11:32:43.531969 run osmo-stp_10.42.42.5(pid=16602): Launched 11:32:43.652128 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 11:32:44.227991 run pcap-recorder_any(filters='host 10.42.42.6')(pid=16604): Launched 11:32:44.345422 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 11:32:44.634653 run patchelf(pid=16605): Launched 11:32:44.827214 run osmo-stp_10.42.42.5(pid=16602): ERR: Terminated: ERROR {rc=1} [trial-2404↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=16602)] 11:32:44.968058 run osmo-stp_10.42.42.5(pid=16602): stdout: | (launched: 2022-12-14_11:32:43.368052) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 11:32:45.109084 run osmo-stp_10.42.42.5(pid=16602): stderr: | �[0;m�[38;5;43m20221214113243558 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214113243559 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214113243559 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214113243559 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214113243560 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214113243560 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214113243560 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 11:32:45.245549 run osmo-stp_10.42.42.5(pid=16602): stdout: | (launched: 2022-12-14_11:32:43.368052) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 11:32:45.380766 run osmo-stp_10.42.42.5(pid=16602): stderr: | �[0;m�[38;5;43m20221214113243558 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214113243559 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214113243559 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214113243559 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214113243560 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214113243560 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214113243560 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 11:32:45.538264 run patchelf(pid=16605): Terminating (SIGINT) 11:32:45.723648 run patchelf(pid=16605): Terminated: ok {rc=0} 11:32:45.757692 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=16602): Process ended prematurely: osmo-stp_10.42.42.5(pid=16602) [trial-2404↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=16602)] [trial-2404↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py:38] 11:32:45.767652 tst cs_paging_gprs_active.py:38: Test FAILED (8.7 sec) 11:32:45.830900 run osmo-hlr_10.42.42.2(pid=16599): ERR: Terminated: ERROR {rc=237} [trial-2404↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=16599)] 11:32:45.899688 run osmo-hlr_10.42.42.2(pid=16599): stdout: | (launched: 2022-12-14_11:32:42.338786) 11:32:45.952803 run osmo-hlr_10.42.42.2(pid=16599): stderr: | �[0;m�[1;31m20221214113242532 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214113242532 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214113242532 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214113242532 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214113242532 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214113242532 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214113242544 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2404/run.2022-12-14_11-25-45/gprs:sysmo+mod-bts0-egprs/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214113242553 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214113242554 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214113242554 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 11:32:45.998838 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16592): Terminating (SIGTERM) 11:32:46.042719 run iperf3-srv_10.42.42.10(pid=16593): Terminating (SIGTERM) 11:32:46.088844 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16594): Terminating (SIGTERM) 11:32:46.132731 run iperf3-srv_10.42.42.10(pid=16595): Terminating (SIGTERM) 11:32:46.178995 run pcap-recorder_any(filters='host 10.42.42.2')(pid=16598): Terminating (SIGTERM) 11:32:46.222959 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=16601): Terminating (SIGTERM) 11:32:46.268089 run pcap-recorder_any(filters='host 10.42.42.6')(pid=16604): Terminating (SIGTERM) 11:32:46.279274 --- ParallelTerminationStrategy: PID 16592 died... 11:32:46.336775 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16592): Terminated: ok {rc=0} 11:32:46.347359 --- ParallelTerminationStrategy: PID 16593 died... 11:32:46.404113 run iperf3-srv_10.42.42.10(pid=16593): Terminated {rc=256} 11:32:46.414550 --- ParallelTerminationStrategy: PID 16594 died... 11:32:46.471331 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16594): Terminated: ok {rc=0} 11:32:46.481974 --- ParallelTerminationStrategy: PID 16595 died... 11:32:46.539191 run iperf3-srv_10.42.42.10(pid=16595): Terminated {rc=256} 11:32:46.549882 --- ParallelTerminationStrategy: PID 16598 died... 11:32:46.607395 run pcap-recorder_any(filters='host 10.42.42.2')(pid=16598): Terminated: ok {rc=0} 11:32:46.618007 --- ParallelTerminationStrategy: PID 16601 died... 11:32:46.675231 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=16601): Terminated: ok {rc=0} 11:32:46.686091 --- ParallelTerminationStrategy: PID 16604 died... 11:32:46.743229 run pcap-recorder_any(filters='host 10.42.42.6')(pid=16604): Terminated: ok {rc=0} 11:32:46.832644 bus /gobi_0: Setting Powered False 11:32:47.939852 bus /gobi_0: Setting Powered False 11:32:49.048795 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=16602): Process ended prematurely: osmo-stp_10.42.42.5(pid=16602) [trial-2404↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=16602)]