Failed
gprs:oc2g+mod-bts0-egprs.cs_paging_gprs_active.py (from gprs_oc2g+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=17426): Process ended prematurely: osmo-stp_10.42.42.5(pid=17426) [trial-2404↪gprs:oc2g+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=17426)]
Standard Output
---------------------------------------------- trial-2404 gprs:oc2g+mod-bts0-egprs cs_paging_gprs_active.py ---------------------------------------------- 11:40:33.798403 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 11:40:33.809843 tst gprs:oc2g+mod-bts0-egprs: Using 1 x bts (candidates: 1) 11:40:33.950708 tst cs_paging_gprs_active.py: using LAC 40646 11:40:34.076708 tst cs_paging_gprs_active.py: using RAC 101 11:40:34.202944 tst cs_paging_gprs_active.py: using CellId 40646 11:40:34.330344 tst cs_paging_gprs_active.py: using BVCI 40647 11:40:34.355491 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 11:40:34.366980 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 11:40:34.378210 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 11:40:34.389329 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 11:40:34.400520 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 11:40:34.411746 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 11:40:34.423340 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 11:40:34.434558 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 11:40:34.446048 tst gprs:oc2g+mod-bts0-egprs: Using 1 x modem (candidates: 4) 11:40:34.563993 tst gprs:oc2g+mod-bts0-egprs: Using 1 x modem (candidates: 4) 11:40:34.858671 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 11:40:34.994665 run iperf3-srv_10.42.42.10: Starting iperf3-srv 11:40:35.332249 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=17416): Launched 11:40:35.612556 run iperf3-srv_10.42.42.10(pid=17417): Launched 11:40:35.811056 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 11:40:35.946733 run iperf3-srv_10.42.42.10: Starting iperf3-srv 11:40:36.283158 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=17418): Launched 11:40:36.562769 run iperf3-srv_10.42.42.10(pid=17419): Launched 11:40:36.761787 tst cs_paging_gprs_active.py:38: start network... 11:40:36.897479 run osmo-hlr_10.42.42.2: Starting osmo-hlr 11:40:37.421343 run create_hlr_db(pid=17420): Launched 11:40:37.610515 bus /gobi_6: Setting Powered False 11:40:38.631063 run create_hlr_db(pid=17420): Terminated: ok {rc=0} 11:40:39.066800 run pcap-recorder_any(filters='host 10.42.42.2')(pid=17422): Launched 11:40:39.395942 run osmo-hlr_10.42.42.2(pid=17423): Launched 11:40:39.517588 run osmo-stp_10.42.42.5: Starting osmo-stp 11:40:40.090969 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=17425): Launched 11:40:40.416271 run osmo-stp_10.42.42.5(pid=17426): Launched 11:40:40.533790 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 11:40:41.102998 run pcap-recorder_any(filters='host 10.42.42.6')(pid=17428): Launched 11:40:41.219205 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 11:40:41.506451 run patchelf(pid=17429): Launched 11:40:41.697707 run osmo-stp_10.42.42.5(pid=17426): ERR: Terminated: ERROR {rc=1} [trial-2404↪gprs:oc2g+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=17426)] 11:40:41.837895 run osmo-stp_10.42.42.5(pid=17426): stdout: | (launched: 2022-12-14_11:40:40.256720) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 11:40:41.978647 run osmo-stp_10.42.42.5(pid=17426): stderr: | �[0;m�[38;5;43m20221214114040445 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214114040445 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214114040446 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214114040446 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214114040446 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214114040447 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214114040447 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 11:40:42.114079 run osmo-stp_10.42.42.5(pid=17426): stdout: | (launched: 2022-12-14_11:40:40.256720) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 11:40:42.247799 run osmo-stp_10.42.42.5(pid=17426): stderr: | �[0;m�[38;5;43m20221214114040445 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214114040445 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214114040446 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214114040446 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214114040446 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214114040447 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214114040447 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 11:40:42.403587 run patchelf(pid=17429): Terminating (SIGINT) 11:40:42.586550 run patchelf(pid=17429): Terminated: ok {rc=0} 11:40:42.620188 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=17426): Process ended prematurely: osmo-stp_10.42.42.5(pid=17426) [trial-2404↪gprs:oc2g+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=17426)] [trial-2404↪gprs:oc2g+mod-bts0-egprs↪cs_paging_gprs_active.py:38] 11:40:42.630380 tst cs_paging_gprs_active.py:38: Test FAILED (8.9 sec) 11:40:42.693842 run osmo-hlr_10.42.42.2(pid=17423): ERR: Terminated: ERROR {rc=237} [trial-2404↪gprs:oc2g+mod-bts0-egprs↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=17423)] 11:40:42.745616 run osmo-hlr_10.42.42.2(pid=17423): stdout: | (launched: 2022-12-14_11:40:39.233390) 11:40:42.798564 run osmo-hlr_10.42.42.2(pid=17423): stderr: | �[0;m�[1;31m20221214114039431 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214114039431 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214114039431 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214114039431 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214114039431 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214114039431 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214114039444 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2404/run.2022-12-14_11-25-45/gprs:oc2g+mod-bts0-egprs/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214114039452 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214114039452 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214114039453 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 11:40:42.844243 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=17416): Terminating (SIGTERM) 11:40:42.886964 run iperf3-srv_10.42.42.10(pid=17417): Terminating (SIGTERM) 11:40:42.929799 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=17418): Terminating (SIGTERM) 11:40:42.972186 run iperf3-srv_10.42.42.10(pid=17419): Terminating (SIGTERM) 11:40:43.014886 run pcap-recorder_any(filters='host 10.42.42.2')(pid=17422): Terminating (SIGTERM) 11:40:43.057489 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=17425): Terminating (SIGTERM) 11:40:43.100452 run pcap-recorder_any(filters='host 10.42.42.6')(pid=17428): Terminating (SIGTERM) 11:40:43.110323 --- ParallelTerminationStrategy: PID 17416 died... 11:40:43.167473 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=17416): Terminated: ok {rc=0} 11:40:43.177994 --- ParallelTerminationStrategy: PID 17417 died... 11:40:43.234384 run iperf3-srv_10.42.42.10(pid=17417): Terminated {rc=256} 11:40:43.244481 --- ParallelTerminationStrategy: PID 17418 died... 11:40:43.300656 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=17418): Terminated: ok {rc=0} 11:40:43.310852 --- ParallelTerminationStrategy: PID 17419 died... 11:40:43.367658 run iperf3-srv_10.42.42.10(pid=17419): Terminated {rc=256} 11:40:43.377940 --- ParallelTerminationStrategy: PID 17422 died... 11:40:43.433888 run pcap-recorder_any(filters='host 10.42.42.2')(pid=17422): Terminated: ok {rc=0} 11:40:43.444009 --- ParallelTerminationStrategy: PID 17425 died... 11:40:43.500244 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=17425): Terminated: ok {rc=0} 11:40:43.510378 --- ParallelTerminationStrategy: PID 17428 died... 11:40:43.566981 run pcap-recorder_any(filters='host 10.42.42.6')(pid=17428): Terminated: ok {rc=0} 11:40:43.655214 bus /gobi_0: Setting Powered False 11:40:44.758369 bus /gobi_0: Setting Powered False 11:40:45.872918 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=17426): Process ended prematurely: osmo-stp_10.42.42.5(pid=17426) [trial-2404↪gprs:oc2g+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=17426)]