Failed
gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo.cs_paging_gprs_active.py (from gprs_trx-lms-limenet-micro+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=21924): Process ended prematurely: osmo-stp_10.42.42.5(pid=21924) [trial-2404↪gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21924)]
Standard Output
---------------------------------------------- trial-2404 gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo cs_paging_gprs_active.py ---------------------------------------------- 12:25:22.523575 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 12:25:22.535037 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 12:25:22.693989 tst cs_paging_gprs_active.py: using LAC 40882 12:25:22.818023 tst cs_paging_gprs_active.py: using RAC 82 12:25:22.942136 tst cs_paging_gprs_active.py: using CellId 40882 12:25:23.066234 tst cs_paging_gprs_active.py: using BVCI 40883 12:25:23.090537 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 12:25:23.102125 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 12:25:23.113427 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 12:25:23.124645 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 12:25:23.136317 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 12:25:23.147727 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 12:25:23.159168 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 12:25:23.170421 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 12:25:23.182292 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 12:25:23.299046 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 12:25:23.574096 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 12:25:23.697725 run iperf3-srv_10.42.42.10: Starting iperf3-srv 12:25:24.005430 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21914): Launched 12:25:24.261486 run iperf3-srv_10.42.42.10(pid=21915): Launched 12:25:24.442478 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 12:25:24.566233 run iperf3-srv_10.42.42.10: Starting iperf3-srv 12:25:24.875587 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21916): Launched 12:25:25.132490 run iperf3-srv_10.42.42.10(pid=21917): Launched 12:25:25.313563 tst cs_paging_gprs_active.py:38: start network... 12:25:25.437315 run osmo-hlr_10.42.42.2: Starting osmo-hlr 12:25:25.906403 run create_hlr_db(pid=21918): Launched 12:25:26.076706 bus /gobi_6: Setting Powered False 12:25:27.099175 run create_hlr_db(pid=21918): Terminated: ok {rc=0} 12:25:27.525588 run pcap-recorder_any(filters='host 10.42.42.2')(pid=21920): Launched 12:25:27.845083 run osmo-hlr_10.42.42.2(pid=21921): Launched 12:25:27.962039 run osmo-stp_10.42.42.5: Starting osmo-stp 12:25:28.515711 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=21923): Launched 12:25:28.835042 run osmo-stp_10.42.42.5(pid=21924): Launched 12:25:28.950035 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 12:25:29.506998 run pcap-recorder_any(filters='host 10.42.42.6')(pid=21926): Launched 12:25:29.620447 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 12:25:29.904767 run patchelf(pid=21927): Launched 12:25:30.091475 run osmo-stp_10.42.42.5(pid=21924): ERR: Terminated: ERROR {rc=1} [trial-2404↪gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21924)] 12:25:30.228418 run osmo-stp_10.42.42.5(pid=21924): stdout: | (launched: 2022-12-14_12:25:28.678383) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 12:25:30.365657 run osmo-stp_10.42.42.5(pid=21924): stderr: | �[0;m�[38;5;43m20221214122528866 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214122528866 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214122528867 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214122528867 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214122528868 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214122528868 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214122528868 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 12:25:30.498072 run osmo-stp_10.42.42.5(pid=21924): stdout: | (launched: 2022-12-14_12:25:28.678383) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 12:25:30.628590 run osmo-stp_10.42.42.5(pid=21924): stderr: | �[0;m�[38;5;43m20221214122528866 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214122528866 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214122528867 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214122528867 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214122528868 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214122528868 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214122528868 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 12:25:30.782011 run patchelf(pid=21927): Terminating (SIGINT) 12:25:30.974851 run patchelf(pid=21927): Terminated: ok {rc=0} 12:25:31.008833 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=21924): Process ended prematurely: osmo-stp_10.42.42.5(pid=21924) [trial-2404↪gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21924)] [trial-2404↪gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38] 12:25:31.019304 tst cs_paging_gprs_active.py:38: Test FAILED (8.5 sec) 12:25:31.085077 run osmo-hlr_10.42.42.2(pid=21921): ERR: Terminated: ERROR {rc=237} [trial-2404↪gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=21921)] 12:25:31.137127 run osmo-hlr_10.42.42.2(pid=21921): stdout: | (launched: 2022-12-14_12:25:27.688560) 12:25:31.189744 run osmo-hlr_10.42.42.2(pid=21921): stderr: | �[0;m�[1;31m20221214122527883 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214122527883 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214122527883 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214122527883 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214122527883 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214122527883 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214122527896 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2404/run.2022-12-14_11-25-45/gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214122527906 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214122527906 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214122527906 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 12:25:31.234961 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21914): Terminating (SIGTERM) 12:25:31.279216 run iperf3-srv_10.42.42.10(pid=21915): Terminating (SIGTERM) 12:25:31.323256 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21916): Terminating (SIGTERM) 12:25:31.366058 run iperf3-srv_10.42.42.10(pid=21917): Terminating (SIGTERM) 12:25:31.410965 run pcap-recorder_any(filters='host 10.42.42.2')(pid=21920): Terminating (SIGTERM) 12:25:31.452812 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=21923): Terminating (SIGTERM) 12:25:31.495708 run pcap-recorder_any(filters='host 10.42.42.6')(pid=21926): Terminating (SIGTERM) 12:25:31.506403 --- ParallelTerminationStrategy: PID 21914 died... 12:25:31.562189 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21914): Terminated: ok {rc=0} 12:25:31.572490 --- ParallelTerminationStrategy: PID 21915 died... 12:25:31.628064 run iperf3-srv_10.42.42.10(pid=21915): Terminated {rc=256} 12:25:31.638385 --- ParallelTerminationStrategy: PID 21916 died... 12:25:31.693975 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21916): Terminated: ok {rc=0} 12:25:31.704196 --- ParallelTerminationStrategy: PID 21917 died... 12:25:31.759798 run iperf3-srv_10.42.42.10(pid=21917): Terminated {rc=256} 12:25:31.770202 --- ParallelTerminationStrategy: PID 21920 died... 12:25:31.825856 run pcap-recorder_any(filters='host 10.42.42.2')(pid=21920): Terminated: ok {rc=0} 12:25:31.836306 --- ParallelTerminationStrategy: PID 21923 died... 12:25:31.892393 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=21923): Terminated: ok {rc=0} 12:25:31.902833 --- ParallelTerminationStrategy: PID 21926 died... 12:25:31.958307 run pcap-recorder_any(filters='host 10.42.42.6')(pid=21926): Terminated: ok {rc=0} 12:25:32.046106 bus /gobi_0: Setting Powered False 12:25:33.150537 bus /gobi_0: Setting Powered False 12:25:34.257509 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=21924): Process ended prematurely: osmo-stp_10.42.42.5(pid=21924) [trial-2404↪gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21924)]