Failed
gprs:trx-umtrx+mod-bts0-dynts-ipa.cs_paging_gprs_active.py (from gprs_trx-umtrx+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=19588): Process ended prematurely: osmo-stp_10.42.42.5(pid=19588) [trial-2404↪gprs:trx-umtrx+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=19588)]
Standard Output
---------------------------------------------- trial-2404 gprs:trx-umtrx+mod-bts0-dynts-ipa cs_paging_gprs_active.py ---------------------------------------------- 12:07:31.433552 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 12:07:31.449168 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 12:07:31.624148 tst cs_paging_gprs_active.py: using LAC 40788 12:07:31.747186 tst cs_paging_gprs_active.py: using RAC 243 12:07:31.898596 tst cs_paging_gprs_active.py: using CellId 40788 12:07:32.032190 tst cs_paging_gprs_active.py: using BVCI 40789 12:07:32.058089 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 12:07:32.070242 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 12:07:32.082428 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 12:07:32.094552 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 12:07:32.107195 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 12:07:32.119874 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 12:07:32.132623 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 12:07:32.145241 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 12:07:32.157894 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 12:07:32.283055 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 12:07:32.563198 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 12:07:32.688882 run iperf3-srv_10.42.42.10: Starting iperf3-srv 12:07:33.000700 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=19578): Launched 12:07:33.260418 run iperf3-srv_10.42.42.10(pid=19579): Launched 12:07:33.443084 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 12:07:33.568030 run iperf3-srv_10.42.42.10: Starting iperf3-srv 12:07:33.879586 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=19580): Launched 12:07:34.138723 run iperf3-srv_10.42.42.10(pid=19581): Launched 12:07:34.321086 tst cs_paging_gprs_active.py:38: start network... 12:07:34.446351 run osmo-hlr_10.42.42.2: Starting osmo-hlr 12:07:34.917544 run create_hlr_db(pid=19582): Launched 12:07:35.089562 bus /gobi_6: Setting Powered False 12:07:36.112563 run create_hlr_db(pid=19582): Terminated: ok {rc=0} 12:07:36.540938 run pcap-recorder_any(filters='host 10.42.42.2')(pid=19584): Launched 12:07:36.862336 run osmo-hlr_10.42.42.2(pid=19585): Launched 12:07:36.979410 run osmo-stp_10.42.42.5: Starting osmo-stp 12:07:37.537658 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=19587): Launched 12:07:37.859274 run osmo-stp_10.42.42.5(pid=19588): Launched 12:07:37.975802 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 12:07:38.538286 run pcap-recorder_any(filters='host 10.42.42.6')(pid=19590): Launched 12:07:38.653640 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 12:07:38.943445 run patchelf(pid=19591): Launched 12:07:39.133905 run osmo-stp_10.42.42.5(pid=19588): ERR: Terminated: ERROR {rc=1} [trial-2404↪gprs:trx-umtrx+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=19588)] 12:07:39.273419 run osmo-stp_10.42.42.5(pid=19588): stdout: | (launched: 2022-12-14_12:07:37.701277) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 12:07:39.413431 run osmo-stp_10.42.42.5(pid=19588): stderr: | �[0;m�[38;5;43m20221214120737888 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214120737889 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214120737889 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214120737889 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214120737890 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214120737890 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214120737890 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 12:07:39.548451 run osmo-stp_10.42.42.5(pid=19588): stdout: | (launched: 2022-12-14_12:07:37.701277) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 12:07:39.683029 run osmo-stp_10.42.42.5(pid=19588): stderr: | �[0;m�[38;5;43m20221214120737888 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214120737889 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214120737889 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214120737889 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214120737890 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214120737890 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214120737890 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 12:07:39.838498 run patchelf(pid=19591): Terminating (SIGINT) 12:07:40.022323 run patchelf(pid=19591): Terminated: ok {rc=0} 12:07:40.055817 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=19588): Process ended prematurely: osmo-stp_10.42.42.5(pid=19588) [trial-2404↪gprs:trx-umtrx+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=19588)] [trial-2404↪gprs:trx-umtrx+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38] 12:07:40.065660 tst cs_paging_gprs_active.py:38: Test FAILED (8.7 sec) 12:07:40.128452 run osmo-hlr_10.42.42.2(pid=19585): ERR: Terminated: ERROR {rc=237} [trial-2404↪gprs:trx-umtrx+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=19585)] 12:07:40.179564 run osmo-hlr_10.42.42.2(pid=19585): stdout: | (launched: 2022-12-14_12:07:36.705078) 12:07:40.231413 run osmo-hlr_10.42.42.2(pid=19585): stderr: | �[0;m�[1;31m20221214120736898 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214120736898 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214120736899 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214120736899 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214120736899 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214120736899 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214120736911 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2404/run.2022-12-14_11-25-45/gprs:trx-umtrx+mod-bts0-dynts-ipa/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214120736919 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214120736920 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214120736920 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 12:07:40.275521 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=19578): Terminating (SIGTERM) 12:07:40.317750 run iperf3-srv_10.42.42.10(pid=19579): Terminating (SIGTERM) 12:07:40.359560 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=19580): Terminating (SIGTERM) 12:07:40.401613 run iperf3-srv_10.42.42.10(pid=19581): Terminating (SIGTERM) 12:07:40.443501 run pcap-recorder_any(filters='host 10.42.42.2')(pid=19584): Terminating (SIGTERM) 12:07:40.485322 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=19587): Terminating (SIGTERM) 12:07:40.527310 run pcap-recorder_any(filters='host 10.42.42.6')(pid=19590): Terminating (SIGTERM) 12:07:40.537139 --- ParallelTerminationStrategy: PID 19578 died... 12:07:40.592828 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=19578): Terminated: ok {rc=0} 12:07:40.603012 --- ParallelTerminationStrategy: PID 19579 died... 12:07:40.658424 run iperf3-srv_10.42.42.10(pid=19579): Terminated {rc=256} 12:07:40.668656 --- ParallelTerminationStrategy: PID 19580 died... 12:07:40.723675 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=19580): Terminated: ok {rc=0} 12:07:40.733708 --- ParallelTerminationStrategy: PID 19581 died... 12:07:40.788642 run iperf3-srv_10.42.42.10(pid=19581): Terminated {rc=256} 12:07:40.798776 --- ParallelTerminationStrategy: PID 19584 died... 12:07:40.854139 run pcap-recorder_any(filters='host 10.42.42.2')(pid=19584): Terminated: ok {rc=0} 12:07:40.864253 --- ParallelTerminationStrategy: PID 19587 died... 12:07:40.919466 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=19587): Terminated: ok {rc=0} 12:07:40.929956 --- ParallelTerminationStrategy: PID 19590 died... 12:07:40.985165 run pcap-recorder_any(filters='host 10.42.42.6')(pid=19590): Terminated: ok {rc=0} 12:07:41.071737 bus /gobi_0: Setting Powered False 12:07:42.177473 bus /gobi_0: Setting Powered False 12:07:43.285979 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=19588): Process ended prematurely: osmo-stp_10.42.42.5(pid=19588) [trial-2404↪gprs:trx-umtrx+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=19588)]