Failed
gprs:sysmo+mod-bts0-dynts-ipa.cs_paging_gprs_active.py (from gprs_sysmo+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=791): Process ended prematurely: osmo-stp_10.42.42.5(pid=791) [trial-2406↪gprs:sysmo+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=791)]
Standard Output
---------------------------------------------- trial-2406 gprs:sysmo+mod-bts0-dynts-ipa cs_paging_gprs_active.py ---------------------------------------------- 14:28:34.094368 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 14:28:34.105572 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 14:28:34.257620 tst cs_paging_gprs_active.py: using LAC 41531 14:28:34.385060 tst cs_paging_gprs_active.py: using RAC 221 14:28:34.512659 tst cs_paging_gprs_active.py: using CellId 41531 14:28:34.640505 tst cs_paging_gprs_active.py: using BVCI 41532 14:28:34.665339 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 14:28:34.676528 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 14:28:34.687657 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 14:28:34.698699 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 14:28:34.709704 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 14:28:34.720694 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 14:28:34.731885 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 14:28:34.742867 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 14:28:34.754121 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 14:28:34.870119 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 14:28:35.146447 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 14:28:35.272053 run iperf3-srv_10.42.42.10: Starting iperf3-srv 14:28:35.584627 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=781): Launched 14:28:35.844374 run iperf3-srv_10.42.42.10(pid=782): Launched 14:28:36.027755 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 14:28:36.152773 run iperf3-srv_10.42.42.10: Starting iperf3-srv 14:28:36.464646 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=783): Launched 14:28:36.724894 run iperf3-srv_10.42.42.10(pid=784): Launched 14:28:36.907870 tst cs_paging_gprs_active.py:38: start network... 14:28:37.033349 run osmo-hlr_10.42.42.2: Starting osmo-hlr 14:28:37.510869 run create_hlr_db(pid=785): Launched 14:28:37.684428 bus /gobi_6: Setting Powered False 14:28:38.707227 run create_hlr_db(pid=785): Terminated: ok {rc=0} 14:28:39.137973 run pcap-recorder_any(filters='host 10.42.42.2')(pid=787): Launched 14:28:39.463098 run osmo-hlr_10.42.42.2(pid=788): Launched 14:28:39.582821 run osmo-stp_10.42.42.5: Starting osmo-stp 14:28:40.145941 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=790): Launched 14:28:40.469526 run osmo-stp_10.42.42.5(pid=791): Launched 14:28:40.587740 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 14:28:41.152736 run pcap-recorder_any(filters='host 10.42.42.6')(pid=793): Launched 14:28:41.267957 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 14:28:41.551405 run patchelf(pid=794): Launched 14:28:41.740777 run osmo-stp_10.42.42.5(pid=791): ERR: Terminated: ERROR {rc=1} [trial-2406↪gprs:sysmo+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=791)] 14:28:41.879182 run osmo-stp_10.42.42.5(pid=791): stdout: | (launched: 2022-12-14_14:28:40.310669) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 14:28:42.017692 run osmo-stp_10.42.42.5(pid=791): stderr: | �[0;m�[38;5;43m20221214142840505 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214142840505 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214142840505 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214142840506 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214142840506 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214142840506 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214142840506 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 14:28:42.151378 run osmo-stp_10.42.42.5(pid=791): stdout: | (launched: 2022-12-14_14:28:40.310669) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 14:28:42.284042 run osmo-stp_10.42.42.5(pid=791): stderr: | �[0;m�[38;5;43m20221214142840505 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214142840505 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214142840505 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214142840506 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214142840506 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214142840506 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214142840506 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 14:28:42.438803 run patchelf(pid=794): Terminating (SIGINT) 14:28:42.620241 run patchelf(pid=794): Terminated: ok {rc=0} 14:28:42.653446 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=791): Process ended prematurely: osmo-stp_10.42.42.5(pid=791) [trial-2406↪gprs:sysmo+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=791)] [trial-2406↪gprs:sysmo+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38] 14:28:42.663325 tst cs_paging_gprs_active.py:38: Test FAILED (8.6 sec) 14:28:42.726447 run osmo-hlr_10.42.42.2(pid=788): ERR: Terminated: ERROR {rc=237} [trial-2406↪gprs:sysmo+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=788)] 14:28:42.777880 run osmo-hlr_10.42.42.2(pid=788): stdout: | (launched: 2022-12-14_14:28:39.303051) 14:28:42.830256 run osmo-hlr_10.42.42.2(pid=788): stderr: | �[0;m�[1;31m20221214142839501 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214142839501 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214142839501 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214142839501 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214142839501 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214142839501 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214142839514 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2406/run.2022-12-14_14-20-43/gprs:sysmo+mod-bts0-dynts-ipa/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214142839522 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214142839522 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214142839522 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 14:28:42.875014 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=781): Terminating (SIGTERM) 14:28:42.916854 run iperf3-srv_10.42.42.10(pid=782): Terminating (SIGTERM) 14:28:42.958779 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=783): Terminating (SIGTERM) 14:28:43.000536 run iperf3-srv_10.42.42.10(pid=784): Terminating (SIGTERM) 14:28:43.042573 run pcap-recorder_any(filters='host 10.42.42.2')(pid=787): Terminating (SIGTERM) 14:28:43.084450 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=790): Terminating (SIGTERM) 14:28:43.126082 run pcap-recorder_any(filters='host 10.42.42.6')(pid=793): Terminating (SIGTERM) 14:28:43.135639 --- ParallelTerminationStrategy: PID 781 died... 14:28:43.190814 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=781): Terminated: ok {rc=0} 14:28:43.200646 --- ParallelTerminationStrategy: PID 782 died... 14:28:43.255386 run iperf3-srv_10.42.42.10(pid=782): Terminated {rc=256} 14:28:43.265245 --- ParallelTerminationStrategy: PID 783 died... 14:28:43.320063 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=783): Terminated: ok {rc=0} 14:28:43.329925 --- ParallelTerminationStrategy: PID 784 died... 14:28:43.384988 run iperf3-srv_10.42.42.10(pid=784): Terminated {rc=256} 14:28:43.394820 --- ParallelTerminationStrategy: PID 787 died... 14:28:43.449720 run pcap-recorder_any(filters='host 10.42.42.2')(pid=787): Terminated: ok {rc=0} 14:28:43.459637 --- ParallelTerminationStrategy: PID 790 died... 14:28:43.514614 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=790): Terminated: ok {rc=0} 14:28:43.524447 --- ParallelTerminationStrategy: PID 793 died... 14:28:43.579312 run pcap-recorder_any(filters='host 10.42.42.6')(pid=793): Terminated: ok {rc=0} 14:28:43.666359 bus /gobi_0: Setting Powered False 14:28:44.772595 bus /gobi_0: Setting Powered False 14:28:45.892462 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=791): Process ended prematurely: osmo-stp_10.42.42.5(pid=791) [trial-2406↪gprs:sysmo+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=791)]