Failed
dynts:trx-sysmocell5000+mod-bts0-dynts67-osmo.switch_tch_pdch.py (from dynts_trx-sysmocell5000+mod-bts0-dynts67-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=3841): Process ended prematurely: osmo-stp_10.42.42.5(pid=3841) [trial-2406↪dynts:trx-sysmocell5000+mod-bts0-dynts67-osmo↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=3841)]
Standard Output
---------------------------------------------- trial-2406 dynts:trx-sysmocell5000+mod-bts0-dynts67-osmo switch_tch_pdch.py ---------------------------------------------- 14:56:13.252754 tst dynts:trx-sysmocell5000+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 14:56:13.264332 tst dynts:trx-sysmocell5000+mod-bts0-dynts67-osmo: Using 1 x bts (candidates: 1) 14:56:13.420212 tst switch_tch_pdch.py: using LAC 41677 14:56:13.537630 tst switch_tch_pdch.py: using RAC 112 14:56:13.654213 tst switch_tch_pdch.py: using CellId 41677 14:56:13.769810 tst switch_tch_pdch.py: using BVCI 41678 14:56:13.792278 tst dynts:trx-sysmocell5000+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 14:56:13.803348 tst dynts:trx-sysmocell5000+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 14:56:13.814153 tst dynts:trx-sysmocell5000+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 14:56:13.824855 tst dynts:trx-sysmocell5000+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 14:56:13.835966 tst dynts:trx-sysmocell5000+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 14:56:13.847076 tst dynts:trx-sysmocell5000+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 14:56:13.858231 tst dynts:trx-sysmocell5000+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 14:56:13.869265 tst dynts:trx-sysmocell5000+mod-bts0-dynts67-osmo: Using 1 x modem (candidates: 2) 14:56:13.990138 tst dynts:trx-sysmocell5000+mod-bts0-dynts67-osmo: Using 1 x modem (candidates: 2) 14:56:14.278474 tst switch_tch_pdch.py:51: start network... 14:56:14.411149 run osmo-hlr_10.42.42.2: Starting osmo-hlr 14:56:14.892625 run create_hlr_db(pid=3835): Launched 14:56:15.022086 bus /gobi_6: Setting Powered False 14:56:16.107689 run create_hlr_db(pid=3835): Terminated: ok {rc=0} 14:56:16.505391 run pcap-recorder_any(filters='host 10.42.42.2')(pid=3837): Launched 14:56:16.841488 run osmo-hlr_10.42.42.2(pid=3838): Launched 14:56:17.063549 run osmo-stp_10.42.42.5: Starting osmo-stp 14:56:17.659837 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=3840): Launched 14:56:17.974386 run osmo-stp_10.42.42.5(pid=3841): Launched 14:56:18.088476 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 14:56:18.614379 run pcap-recorder_any(filters='host 10.42.42.6')(pid=3843): Launched 14:56:18.726753 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 14:56:19.002191 run patchelf(pid=3844): Launched 14:56:19.187286 run osmo-stp_10.42.42.5(pid=3841): ERR: Terminated: ERROR {rc=1} [trial-2406↪dynts:trx-sysmocell5000+mod-bts0-dynts67-osmo↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=3841)] 14:56:19.322482 run osmo-stp_10.42.42.5(pid=3841): stdout: | (launched: 2022-12-14_14:56:17.820072) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 14:56:19.457314 run osmo-stp_10.42.42.5(pid=3841): stderr: | �[0;m�[38;5;43m20221214145618014 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214145618014 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214145618015 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214145618015 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214145618015 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214145618015 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214145618015 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 14:56:19.587648 run osmo-stp_10.42.42.5(pid=3841): stdout: | (launched: 2022-12-14_14:56:17.820072) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 14:56:19.717331 run osmo-stp_10.42.42.5(pid=3841): stderr: | �[0;m�[38;5;43m20221214145618014 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214145618014 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214145618015 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214145618015 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214145618015 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214145618015 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214145618015 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 14:56:19.867898 run patchelf(pid=3844): Terminating (SIGINT) 14:56:20.045510 run patchelf(pid=3844): Terminated: ok {rc=0} 14:56:20.077820 tst switch_tch_pdch.py:54: ERR: Error: osmo-stp_10.42.42.5(pid=3841): Process ended prematurely: osmo-stp_10.42.42.5(pid=3841) [trial-2406↪dynts:trx-sysmocell5000+mod-bts0-dynts67-osmo↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=3841)] [trial-2406↪dynts:trx-sysmocell5000+mod-bts0-dynts67-osmo↪switch_tch_pdch.py:54] 14:56:20.086820 tst switch_tch_pdch.py:54: Test FAILED (6.8 sec) 14:56:20.149484 run osmo-hlr_10.42.42.2(pid=3838): ERR: Terminated: ERROR {rc=237} [trial-2406↪dynts:trx-sysmocell5000+mod-bts0-dynts67-osmo↪switch_tch_pdch.py↪switch_tch_pdch.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=3838)] 14:56:20.200396 run osmo-hlr_10.42.42.2(pid=3838): stdout: | (launched: 2022-12-14_14:56:16.661873) 14:56:20.252078 run osmo-hlr_10.42.42.2(pid=3838): stderr: | �[0;m�[1;31m20221214145617072 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214145617072 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214145617072 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214145617072 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214145617073 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214145617073 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214145617099 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2406/run.2022-12-14_14-20-43/dynts:trx-sysmocell5000+mod-bts0-dynts67-osmo/switch_tch_pdch.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214145617118 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214145617118 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214145617118 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 14:56:20.297812 run pcap-recorder_any(filters='host 10.42.42.2')(pid=3837): Terminating (SIGTERM) 14:56:20.339344 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=3840): Terminating (SIGTERM) 14:56:20.380900 run pcap-recorder_any(filters='host 10.42.42.6')(pid=3843): Terminating (SIGTERM) 14:56:20.390517 --- ParallelTerminationStrategy: PID 3837 died... 14:56:20.446012 run pcap-recorder_any(filters='host 10.42.42.2')(pid=3837): Terminated: ok {rc=0} 14:56:20.455913 --- ParallelTerminationStrategy: PID 3840 died... 14:56:20.511495 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=3840): Terminated: ok {rc=0} 14:56:20.521492 --- ParallelTerminationStrategy: PID 3843 died... 14:56:20.576442 run pcap-recorder_any(filters='host 10.42.42.6')(pid=3843): Terminated: ok {rc=0} 14:56:20.662875 bus /gobi_0: Setting Powered False 14:56:21.768585 bus /gobi_0: Setting Powered False 14:56:22.878340 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/dynts/switch_tch_pdch.py", line 54, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=3841): Process ended prematurely: osmo-stp_10.42.42.5(pid=3841) [trial-2406↪dynts:trx-sysmocell5000+mod-bts0-dynts67-osmo↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=3841)]