Failed
gprs:oc2g+mod-bts0-dynts-ipa.cs_paging_gprs_active.py (from gprs_oc2g+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=1923): Process ended prematurely: osmo-stp_10.42.42.5(pid=1923) [trial-2406↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1923)]
Standard Output
---------------------------------------------- trial-2406 gprs:oc2g+mod-bts0-dynts-ipa cs_paging_gprs_active.py ---------------------------------------------- 14:36:30.147866 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 14:36:30.159297 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 14:36:30.315158 tst cs_paging_gprs_active.py: using LAC 41573 14:36:30.441068 tst cs_paging_gprs_active.py: using RAC 8 14:36:30.567308 tst cs_paging_gprs_active.py: using CellId 41573 14:36:30.692772 tst cs_paging_gprs_active.py: using BVCI 41574 14:36:30.718095 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 14:36:30.729405 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 14:36:30.740461 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 14:36:30.751636 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 14:36:30.762727 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 14:36:30.773839 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 14:36:30.785018 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 14:36:30.796106 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 14:36:30.807592 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 14:36:30.954552 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 14:36:31.280030 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 14:36:31.420640 run iperf3-srv_10.42.42.10: Starting iperf3-srv 14:36:31.777509 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=1913): Launched 14:36:32.078656 run iperf3-srv_10.42.42.10(pid=1914): Launched 14:36:32.281816 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 14:36:32.418455 run iperf3-srv_10.42.42.10: Starting iperf3-srv 14:36:32.759005 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=1915): Launched 14:36:33.041967 run iperf3-srv_10.42.42.10(pid=1916): Launched 14:36:33.244039 tst cs_paging_gprs_active.py:38: start network... 14:36:33.381195 run osmo-hlr_10.42.42.2: Starting osmo-hlr 14:36:33.907776 run create_hlr_db(pid=1917): Launched 14:36:34.097075 bus /gobi_6: Setting Powered False 14:36:35.118829 run create_hlr_db(pid=1917): Terminated: ok {rc=0} 14:36:35.553917 run pcap-recorder_any(filters='host 10.42.42.2')(pid=1919): Launched 14:36:35.882166 run osmo-hlr_10.42.42.2(pid=1920): Launched 14:36:36.003932 run osmo-stp_10.42.42.5: Starting osmo-stp 14:36:36.574482 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=1922): Launched 14:36:36.901592 run osmo-stp_10.42.42.5(pid=1923): Launched 14:36:37.020184 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 14:36:37.591256 run pcap-recorder_any(filters='host 10.42.42.6')(pid=1925): Launched 14:36:37.707989 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 14:36:37.994509 run patchelf(pid=1926): Launched 14:36:38.186953 run osmo-stp_10.42.42.5(pid=1923): ERR: Terminated: ERROR {rc=1} [trial-2406↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1923)] 14:36:38.326842 run osmo-stp_10.42.42.5(pid=1923): stdout: | (launched: 2022-12-14_14:36:36.740410) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 14:36:38.466603 run osmo-stp_10.42.42.5(pid=1923): stderr: | �[0;m�[38;5;43m20221214143636935 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214143636935 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214143636935 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214143636936 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214143636936 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214143636936 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214143636936 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 14:36:38.601690 run osmo-stp_10.42.42.5(pid=1923): stdout: | (launched: 2022-12-14_14:36:36.740410) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 14:36:38.735532 run osmo-stp_10.42.42.5(pid=1923): stderr: | �[0;m�[38;5;43m20221214143636935 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214143636935 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214143636935 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214143636936 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214143636936 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214143636936 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214143636936 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 14:36:38.891776 run patchelf(pid=1926): Terminating (SIGINT) 14:36:39.075614 run patchelf(pid=1926): Terminated: ok {rc=0} 14:36:39.109080 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=1923): Process ended prematurely: osmo-stp_10.42.42.5(pid=1923) [trial-2406↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1923)] [trial-2406↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38] 14:36:39.119275 tst cs_paging_gprs_active.py:38: Test FAILED (9.0 sec) 14:36:39.182492 run osmo-hlr_10.42.42.2(pid=1920): ERR: Terminated: ERROR {rc=237} [trial-2406↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=1920)] 14:36:39.233802 run osmo-hlr_10.42.42.2(pid=1920): stdout: | (launched: 2022-12-14_14:36:35.720601) 14:36:39.285830 run osmo-hlr_10.42.42.2(pid=1920): stderr: | �[0;m�[1;31m20221214143635922 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214143635922 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214143635922 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214143635922 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214143635922 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214143635923 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214143635935 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2406/run.2022-12-14_14-20-43/gprs:oc2g+mod-bts0-dynts-ipa/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214143635943 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214143635943 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214143635943 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 14:36:39.330473 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=1913): Terminating (SIGTERM) 14:36:39.372444 run iperf3-srv_10.42.42.10(pid=1914): Terminating (SIGTERM) 14:36:39.414409 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=1915): Terminating (SIGTERM) 14:36:39.456167 run iperf3-srv_10.42.42.10(pid=1916): Terminating (SIGTERM) 14:36:39.498198 run pcap-recorder_any(filters='host 10.42.42.2')(pid=1919): Terminating (SIGTERM) 14:36:39.540677 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=1922): Terminating (SIGTERM) 14:36:39.582614 run pcap-recorder_any(filters='host 10.42.42.6')(pid=1925): Terminating (SIGTERM) 14:36:39.592256 --- ParallelTerminationStrategy: PID 1913 died... 14:36:39.648005 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=1913): Terminated: ok {rc=0} 14:36:39.658126 --- ParallelTerminationStrategy: PID 1914 died... 14:36:39.713371 run iperf3-srv_10.42.42.10(pid=1914): Terminated {rc=256} 14:36:39.723327 --- ParallelTerminationStrategy: PID 1915 died... 14:36:39.778548 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=1915): Terminated: ok {rc=0} 14:36:39.788509 --- ParallelTerminationStrategy: PID 1916 died... 14:36:39.844006 run iperf3-srv_10.42.42.10(pid=1916): Terminated {rc=256} 14:36:39.854013 --- ParallelTerminationStrategy: PID 1919 died... 14:36:39.909106 run pcap-recorder_any(filters='host 10.42.42.2')(pid=1919): Terminated: ok {rc=0} 14:36:39.918932 --- ParallelTerminationStrategy: PID 1922 died... 14:36:39.974186 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=1922): Terminated: ok {rc=0} 14:36:39.984163 --- ParallelTerminationStrategy: PID 1925 died... 14:36:40.039637 run pcap-recorder_any(filters='host 10.42.42.6')(pid=1925): Terminated: ok {rc=0} 14:36:40.126207 bus /gobi_0: Setting Powered False 14:36:41.232688 bus /gobi_0: Setting Powered False 14:36:42.340588 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=1923): Process ended prematurely: osmo-stp_10.42.42.5(pid=1923) [trial-2406↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1923)]