Failed
gprs:sysmo+mod-bts0-dynts-ipa.ping_idle_ping.py (from gprs_sysmo+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=848): Process ended prematurely: osmo-stp_10.42.42.5(pid=848) [trial-2406↪gprs:sysmo+mod-bts0-dynts-ipa↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=848)]
Standard Output
---------------------------------------------- trial-2406 gprs:sysmo+mod-bts0-dynts-ipa ping_idle_ping.py ---------------------------------------------- 14:29:24.671671 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 14:29:24.683569 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 14:29:24.826997 tst ping_idle_ping.py: using LAC 41535 14:29:24.943322 tst ping_idle_ping.py: using RAC 225 14:29:25.060781 tst ping_idle_ping.py: using CellId 41535 14:29:25.177154 tst ping_idle_ping.py: using BVCI 41536 14:29:25.199505 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 14:29:25.210364 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 14:29:25.220783 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 14:29:25.231342 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 14:29:25.241976 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 14:29:25.252725 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 14:29:25.263648 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 14:29:25.275542 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 14:29:25.551750 tst ping_idle_ping.py:24: start network... 14:29:25.674705 run osmo-hlr_10.42.42.2: Starting osmo-hlr 14:29:26.141984 run create_hlr_db(pid=841): Launched 14:29:26.312512 bus /gobi_6: Setting Powered False 14:29:27.334138 run create_hlr_db(pid=841): Terminated: ok {rc=0} 14:29:27.759812 run pcap-recorder_any(filters='host 10.42.42.2')(pid=844): Launched 14:29:28.078786 run osmo-hlr_10.42.42.2(pid=845): Launched 14:29:28.198552 run osmo-stp_10.42.42.5: Starting osmo-stp 14:29:28.752043 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=847): Launched 14:29:29.070185 run osmo-stp_10.42.42.5(pid=848): Launched 14:29:29.184569 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 14:29:29.740534 run pcap-recorder_any(filters='host 10.42.42.6')(pid=850): Launched 14:29:29.854068 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 14:29:30.131274 run patchelf(pid=851): Launched 14:29:30.318124 run osmo-stp_10.42.42.5(pid=848): ERR: Terminated: ERROR {rc=1} [trial-2406↪gprs:sysmo+mod-bts0-dynts-ipa↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=848)] 14:29:30.454242 run osmo-stp_10.42.42.5(pid=848): stdout: | (launched: 2022-12-14_14:29:28.914098) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 14:29:30.590466 run osmo-stp_10.42.42.5(pid=848): stderr: | �[0;m�[38;5;43m20221214142929105 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214142929105 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214142929105 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214142929105 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214142929108 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214142929108 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214142929108 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 14:29:30.722225 run osmo-stp_10.42.42.5(pid=848): stdout: | (launched: 2022-12-14_14:29:28.914098) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 14:29:30.853539 run osmo-stp_10.42.42.5(pid=848): stderr: | �[0;m�[38;5;43m20221214142929105 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214142929105 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214142929105 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214142929105 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214142929108 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214142929108 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214142929108 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 14:29:31.011123 run patchelf(pid=851): Terminating (SIGINT) 14:29:31.192071 run patchelf(pid=851): Terminated: ok {rc=0} 14:29:31.225889 tst ping_idle_ping.py:27: ERR: Error: osmo-stp_10.42.42.5(pid=848): Process ended prematurely: osmo-stp_10.42.42.5(pid=848) [trial-2406↪gprs:sysmo+mod-bts0-dynts-ipa↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=848)] [trial-2406↪gprs:sysmo+mod-bts0-dynts-ipa↪ping_idle_ping.py:27] 14:29:31.236067 tst ping_idle_ping.py:27: Test FAILED (6.6 sec) 14:29:31.300168 run osmo-hlr_10.42.42.2(pid=845): ERR: Terminated: ERROR {rc=237} [trial-2406↪gprs:sysmo+mod-bts0-dynts-ipa↪ping_idle_ping.py↪ping_idle_ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=845)] 14:29:31.351923 run osmo-hlr_10.42.42.2(pid=845): stdout: | (launched: 2022-12-14_14:29:27.922308) 14:29:31.404875 run osmo-hlr_10.42.42.2(pid=845): stderr: | �[0;m�[1;31m20221214142928121 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214142928121 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214142928121 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214142928121 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214142928121 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214142928121 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214142928134 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2406/run.2022-12-14_14-20-43/gprs:sysmo+mod-bts0-dynts-ipa/ping_idle_ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214142928142 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214142928142 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214142928142 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 14:29:31.449883 run pcap-recorder_any(filters='host 10.42.42.2')(pid=844): Terminating (SIGTERM) 14:29:31.492207 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=847): Terminating (SIGTERM) 14:29:31.534570 run pcap-recorder_any(filters='host 10.42.42.6')(pid=850): Terminating (SIGTERM) 14:29:31.544612 --- ParallelTerminationStrategy: PID 844 died... 14:29:31.601102 run pcap-recorder_any(filters='host 10.42.42.2')(pid=844): Terminated: ok {rc=0} 14:29:31.611525 --- ParallelTerminationStrategy: PID 847 died... 14:29:31.669102 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=847): Terminated: ok {rc=0} 14:29:31.679989 --- ParallelTerminationStrategy: PID 850 died... 14:29:31.738680 run pcap-recorder_any(filters='host 10.42.42.6')(pid=850): Terminated: ok {rc=0} 14:29:31.830955 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping_idle_ping.py", line 27, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=848): Process ended prematurely: osmo-stp_10.42.42.5(pid=848) [trial-2406↪gprs:sysmo+mod-bts0-dynts-ipa↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=848)]