
----------------------------------------------
trial-2395 gprs:nanobts+band-900 ping_idle_ping.py
----------------------------------------------
22:54:51.078709 tst            gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9)
22:54:51.090394 tst            gprs:nanobts+band-900: Using 1 x bts (candidates: 1)
22:54:51.233758 tst                ping_idle_ping.py: using LAC 36793
22:54:51.359335 tst                ping_idle_ping.py: using RAC 73
22:54:51.484646 tst                ping_idle_ping.py: using CellId 36793
22:54:51.612134 tst                ping_idle_ping.py: using BVCI 36794
22:54:51.636585 tst            gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9)
22:54:51.647883 tst            gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9)
22:54:51.658897 tst            gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9)
22:54:51.669942 tst            gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9)
22:54:51.681631 tst            gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9)
22:54:51.693387 tst            gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9)
22:54:51.705372 tst            gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9)
22:54:51.717247 tst            gprs:nanobts+band-900: Using 1 x modem (candidates: 4)
22:54:52.011500 tst             ping_idle_ping.py:24: start network...
22:54:52.145240 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
22:54:52.650681 run         create_hlr_db(pid=10524): Launched
22:54:52.836923 bus                          /gobi_6: Setting Powered False
22:54:53.857528 run         create_hlr_db(pid=10524): Terminated: ok {rc=0}
22:54:54.258495 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10526): Launched
22:54:54.558184 run   osmo-hlr_10.42.42.2(pid=10527): Launched
22:54:54.669374 run              osmo-stp_10.42.42.5: Starting osmo-stp
22:54:55.187191 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10529): Launched
22:54:55.486893 run   osmo-stp_10.42.42.5(pid=10530): Launched
22:54:55.597099 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
22:54:56.118345 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10532): Launched
22:54:56.224387 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
22:54:56.485210 run              patchelf(pid=10533): Launched
22:54:56.660449 run   osmo-stp_10.42.42.5(pid=10530): ERR: Terminated: ERROR {rc=1}  [trial-2395↪gprs:nanobts+band-900↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10530)]
22:54:56.788409 run   osmo-stp_10.42.42.5(pid=10530): stdout: 
| (launched: 2022-12-13_22:54:55.339507)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
22:54:56.917269 run   osmo-stp_10.42.42.5(pid=10530): stderr: 
| [0;m[38;5;43m20221213225455510 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221213225455510 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221213225455511 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221213225455511 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221213225455511 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221213225455511 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221213225455512 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
22:54:57.040709 run   osmo-stp_10.42.42.5(pid=10530): stdout: 
| (launched: 2022-12-13_22:54:55.339507)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
22:54:57.163468 run   osmo-stp_10.42.42.5(pid=10530): stderr: 
| [0;m[38;5;43m20221213225455510 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221213225455510 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221213225455511 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221213225455511 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221213225455511 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221213225455511 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221213225455512 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
22:54:57.306189 run              patchelf(pid=10533): Terminating (SIGINT)
22:54:57.473172 run              patchelf(pid=10533): Terminated: ok {rc=0}
22:54:57.503656 tst             ping_idle_ping.py:27: ERR: Error: osmo-stp_10.42.42.5(pid=10530): Process ended prematurely: osmo-stp_10.42.42.5(pid=10530) [trial-2395↪gprs:nanobts+band-900↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10530)]  [trial-2395↪gprs:nanobts+band-900↪ping_idle_ping.py:27]
22:54:57.512290 tst             ping_idle_ping.py:27: Test FAILED (6.4 sec)
22:54:57.572369 run   osmo-hlr_10.42.42.2(pid=10527): ERR: Terminated: ERROR {rc=237}  [trial-2395↪gprs:nanobts+band-900↪ping_idle_ping.py↪ping_idle_ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=10527)]
22:54:57.621103 run   osmo-hlr_10.42.42.2(pid=10527): stdout: 
| (launched: 2022-12-13_22:54:54.409873) 
22:54:57.671152 run   osmo-hlr_10.42.42.2(pid=10527): stderr: 
| [0;m[1;31m20221213225454586 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| [0;m[1;31m20221213225454586 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| [0;m[1;31m20221213225454586 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| [0;m[1;31m20221213225454586 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| [0;m[1;31m20221213225454586 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| [0;m[1;31m20221213225454586 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| [0;m[1;31m20221213225454598 [1;33mDDB[0;m[1;31m [1;33mNOTICE[0;m[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2395/run.2022-12-13_21-44-31/gprs:nanobts+band-900/ping_idle_ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| [0;m20221213225454608 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221213225454608 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221213225454608 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
22:54:57.713532 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10526): Terminating (SIGTERM)
22:54:57.753536 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10529): Terminating (SIGTERM)
22:54:57.793832 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10532): Terminating (SIGTERM)
22:54:57.803370 ---      ParallelTerminationStrategy: PID 10526 died...
22:54:57.857355 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10526): Terminated: ok {rc=0}
22:54:57.867243 ---      ParallelTerminationStrategy: PID 10529 died...
22:54:57.920507 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10529): Terminated: ok {rc=0}
22:54:57.930168 ---      ParallelTerminationStrategy: PID 10532 died...
22:54:57.988096 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10532): Terminated: ok {rc=0}
22:54:58.076238 bus                          /gobi_6: Setting Powered False
