
----------------------------------------------
trial-2401 dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo switch_tch_pdch.py
----------------------------------------------
07:58:02.005163 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8)
07:58:02.021781 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo: Using 1 x bts (candidates: 1)
07:58:02.190678 tst               switch_tch_pdch.py: using LAC 39505
07:58:02.312929 tst               switch_tch_pdch.py: using RAC 235
07:58:02.431816 tst               switch_tch_pdch.py: using CellId 39505
07:58:02.551140 tst               switch_tch_pdch.py: using BVCI 39506
07:58:02.574259 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8)
07:58:02.585724 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8)
07:58:02.597193 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8)
07:58:02.608358 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8)
07:58:02.619367 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8)
07:58:02.630411 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8)
07:58:02.641517 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8)
07:58:02.652429 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo: Using 1 x modem (candidates: 2)
07:58:02.774127 tst dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo: Using 1 x modem (candidates: 2)
07:58:03.071515 tst            switch_tch_pdch.py:51: start network...
07:58:03.207311 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
07:58:03.693130 run         create_hlr_db(pid=25876): Launched
07:58:03.825971 bus                          /gobi_6: Setting Powered False
07:58:04.902392 run         create_hlr_db(pid=25876): Terminated: ok {rc=0}
07:58:05.286620 run pcap-recorder_any(filters='host 10.42.42.2')(pid=25878): Launched
07:58:05.594206 run   osmo-hlr_10.42.42.2(pid=25879): Launched
07:58:05.714958 run              osmo-stp_10.42.42.5: Starting osmo-stp
07:58:06.226156 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=25881): Launched
07:58:06.529862 run   osmo-stp_10.42.42.5(pid=25882): Launched
07:58:06.639732 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
07:58:07.142876 run pcap-recorder_any(filters='host 10.42.42.6')(pid=25884): Launched
07:58:07.250056 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
07:58:07.516005 run              patchelf(pid=25885): Launched
07:58:07.694124 run   osmo-stp_10.42.42.5(pid=25882): ERR: Terminated: ERROR {rc=1}  [trial-2401↪dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=25882)]
07:58:07.823603 run   osmo-stp_10.42.42.5(pid=25882): stdout: 
| (launched: 2022-12-14_07:58:06.379723)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
07:58:07.953190 run   osmo-stp_10.42.42.5(pid=25882): stderr: 
| [0;m[38;5;43m20221214075806552 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221214075806552 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221214075806552 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221214075806553 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221214075806553 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221214075806553 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221214075806553 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
07:58:08.077746 run   osmo-stp_10.42.42.5(pid=25882): stdout: 
| (launched: 2022-12-14_07:58:06.379723)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
07:58:08.200894 run   osmo-stp_10.42.42.5(pid=25882): stderr: 
| [0;m[38;5;43m20221214075806552 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221214075806552 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221214075806552 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221214075806553 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221214075806553 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221214075806553 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221214075806553 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
07:58:08.345988 run              patchelf(pid=25885): Terminating (SIGINT)
07:58:08.517167 run              patchelf(pid=25885): Terminated: ok {rc=0}
07:58:08.548350 tst            switch_tch_pdch.py:54: ERR: Error: osmo-stp_10.42.42.5(pid=25882): Process ended prematurely: osmo-stp_10.42.42.5(pid=25882) [trial-2401↪dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=25882)]  [trial-2401↪dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo↪switch_tch_pdch.py:54]
07:58:08.557116 tst            switch_tch_pdch.py:54: Test FAILED (6.5 sec)
07:58:08.617055 run   osmo-hlr_10.42.42.2(pid=25879): ERR: Terminated: ERROR {rc=237}  [trial-2401↪dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo↪switch_tch_pdch.py↪switch_tch_pdch.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=25879)]
07:58:08.665990 run   osmo-hlr_10.42.42.2(pid=25879): stdout: 
| (launched: 2022-12-14_07:58:05.441952) 
07:58:08.715733 run   osmo-hlr_10.42.42.2(pid=25879): stderr: 
| [0;m[1;31m20221214075805621 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| [0;m[1;31m20221214075805621 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| [0;m[1;31m20221214075805621 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| [0;m[1;31m20221214075805621 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| [0;m[1;31m20221214075805621 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| [0;m[1;31m20221214075805621 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| [0;m[1;31m20221214075805634 [1;33mDDB[0;m[1;31m [1;33mNOTICE[0;m[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2401/run.2022-12-14_06-57-06/dynts:trx-lms-limenet-micro+mod-bts0-dynts67-osmo/switch_tch_pdch.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| [0;m20221214075805644 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221214075805645 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221214075805645 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
07:58:08.758168 run pcap-recorder_any(filters='host 10.42.42.2')(pid=25878): Terminating (SIGTERM)
07:58:08.798280 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=25881): Terminating (SIGTERM)
07:58:08.838277 run pcap-recorder_any(filters='host 10.42.42.6')(pid=25884): Terminating (SIGTERM)
07:58:08.847580 ---      ParallelTerminationStrategy: PID 25878 died...
07:58:08.901167 run pcap-recorder_any(filters='host 10.42.42.2')(pid=25878): Terminated: ok {rc=0}
07:58:08.910892 ---      ParallelTerminationStrategy: PID 25881 died...
07:58:08.964112 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=25881): Terminated: ok {rc=0}
07:58:08.973823 ---      ParallelTerminationStrategy: PID 25884 died...
07:58:09.026668 run pcap-recorder_any(filters='host 10.42.42.6')(pid=25884): Terminated: ok {rc=0}
07:58:09.115468 bus                          /gobi_0: Setting Powered False
07:58:10.220356 bus                          /gobi_0: Setting Powered False
07:58:11.332985 bus                          /gobi_6: Setting Powered False
