
----------------------------------------------
trial-2401 gprs:nanobts+band-1900+mod-bts0-egprs ping_idle_ping.py
----------------------------------------------
08:02:51.950864 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
08:02:51.962970 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x bts (candidates: 1)
08:02:52.099118 tst                ping_idle_ping.py: using LAC 39531
08:02:52.224009 tst                ping_idle_ping.py: using RAC 6
08:02:52.349720 tst                ping_idle_ping.py: using CellId 39531
08:02:52.475882 tst                ping_idle_ping.py: using BVCI 39532
08:02:52.499946 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
08:02:52.511482 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
08:02:52.522722 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
08:02:52.533880 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
08:02:52.545965 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
08:02:52.557860 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
08:02:52.569918 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
08:02:52.581945 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x modem (candidates: 4)
08:02:52.856281 tst             ping_idle_ping.py:24: start network...
08:02:52.977607 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
08:02:53.458028 run         create_hlr_db(pid=26211): Launched
08:02:53.628564 bus                          /gobi_6: Setting Powered False
08:02:54.649582 run         create_hlr_db(pid=26211): Terminated: ok {rc=0}
08:02:55.045418 run pcap-recorder_any(filters='host 10.42.42.2')(pid=26213): Launched
08:02:55.341524 run   osmo-hlr_10.42.42.2(pid=26214): Launched
08:02:55.449417 run              osmo-stp_10.42.42.5: Starting osmo-stp
08:02:55.961049 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=26216): Launched
08:02:56.257206 run   osmo-stp_10.42.42.5(pid=26217): Launched
08:02:56.363009 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
08:02:56.880184 run pcap-recorder_any(filters='host 10.42.42.6')(pid=26219): Launched
08:02:56.983663 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
08:02:57.239596 run              patchelf(pid=26220): Launched
08:02:57.411509 run   osmo-stp_10.42.42.5(pid=26217): ERR: Terminated: ERROR {rc=1}  [trial-2401↪gprs:nanobts+band-1900+mod-bts0-egprs↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26217)]
08:02:57.537573 run   osmo-stp_10.42.42.5(pid=26217): stdout: 
| (launched: 2022-12-14_08:02:56.111132)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
08:02:57.663808 run   osmo-stp_10.42.42.5(pid=26217): stderr: 
| [0;m[38;5;43m20221214080256278 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221214080256278 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221214080256279 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221214080256279 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221214080256280 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221214080256280 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221214080256280 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
08:02:57.784798 run   osmo-stp_10.42.42.5(pid=26217): stdout: 
| (launched: 2022-12-14_08:02:56.111132)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
08:02:57.904000 run   osmo-stp_10.42.42.5(pid=26217): stderr: 
| [0;m[38;5;43m20221214080256278 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| [0;m[38;5;43m20221214080256278 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| [0;m[38;5;43m20221214080256279 [1;32mDLSS7[0;m[38;5;43m [1;32mINFO[0;m[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| [0;m20221214080256279 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221214080256280 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221214080256280 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221214080256280 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
08:02:58.045053 run              patchelf(pid=26220): Terminating (SIGINT)
08:02:58.210970 run              patchelf(pid=26220): Terminated: ok {rc=0}
08:02:58.241779 tst             ping_idle_ping.py:27: ERR: Error: osmo-stp_10.42.42.5(pid=26217): Process ended prematurely: osmo-stp_10.42.42.5(pid=26217) [trial-2401↪gprs:nanobts+band-1900+mod-bts0-egprs↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26217)]  [trial-2401↪gprs:nanobts+band-1900+mod-bts0-egprs↪ping_idle_ping.py:27]
08:02:58.250259 tst             ping_idle_ping.py:27: Test FAILED (6.3 sec)
08:02:58.308670 run   osmo-hlr_10.42.42.2(pid=26214): ERR: Terminated: ERROR {rc=237}  [trial-2401↪gprs:nanobts+band-1900+mod-bts0-egprs↪ping_idle_ping.py↪ping_idle_ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=26214)]
08:02:58.356355 run   osmo-hlr_10.42.42.2(pid=26214): stdout: 
| (launched: 2022-12-14_08:02:55.195101) 
08:02:58.404858 run   osmo-hlr_10.42.42.2(pid=26214): stderr: 
| [0;m[1;31m20221214080255369 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| [0;m[1;31m20221214080255369 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| [0;m[1;31m20221214080255369 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| [0;m[1;31m20221214080255369 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| [0;m[1;31m20221214080255369 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| [0;m[1;31m20221214080255369 [1;34mDDB[0;m[1;31m [1;34mDEBUG[0;m[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| [0;m[1;31m20221214080255381 [1;33mDDB[0;m[1;31m [1;33mNOTICE[0;m[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2401/run.2022-12-14_06-57-06/gprs:nanobts+band-1900+mod-bts0-egprs/ping_idle_ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| [0;m20221214080255390 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221214080255390 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221214080255390 [1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
08:02:58.446369 run pcap-recorder_any(filters='host 10.42.42.2')(pid=26213): Terminating (SIGTERM)
08:02:58.485577 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=26216): Terminating (SIGTERM)
08:02:58.525111 run pcap-recorder_any(filters='host 10.42.42.6')(pid=26219): Terminating (SIGTERM)
08:02:58.534297 ---      ParallelTerminationStrategy: PID 26213 died...
08:02:58.586754 run pcap-recorder_any(filters='host 10.42.42.2')(pid=26213): Terminated: ok {rc=0}
08:02:58.596273 ---      ParallelTerminationStrategy: PID 26216 died...
08:02:58.648268 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=26216): Terminated: ok {rc=0}
08:02:58.657816 ---      ParallelTerminationStrategy: PID 26219 died...
08:02:58.709640 run pcap-recorder_any(filters='host 10.42.42.6')(pid=26219): Terminated: ok {rc=0}
08:02:58.796216 bus                          /gobi_6: Setting Powered False
