Skip to content
[Jenkins]Jenkins
log insign up

Failed

gprs:sysmo.ping.py (from gprs_sysmo)

Failing for the past 23 builds (Since #2331 )
Took 7 sec.

Stacktrace

osmo-stp_10.42.42.5(pid=10706): Process ended prematurely: osmo-stp_10.42.42.5(pid=10706) [trial-2353↪gprs:sysmo↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10706)]

Standard Output

----------------------------------------------
trial-2353 gprs:sysmo ping.py
----------------------------------------------
02:14:33.452630 tst                       gprs:sysmo: Using 1 x ip_address (candidates: 9)
02:14:33.464642 tst                       gprs:sysmo: Using 1 x bts (candidates: 1)
02:14:33.596881 tst                          ping.py: using LAC 18360
02:14:33.717478 tst                          ping.py: using RAC 255
02:14:33.835931 tst                          ping.py: using CellId 18360
02:14:33.956155 tst                          ping.py: using BVCI 18361
02:14:33.979674 tst                       gprs:sysmo: Using 1 x ip_address (candidates: 9)
02:14:33.990601 tst                       gprs:sysmo: Using 1 x ip_address (candidates: 9)
02:14:34.001233 tst                       gprs:sysmo: Using 1 x ip_address (candidates: 9)
02:14:34.011711 tst                       gprs:sysmo: Using 1 x ip_address (candidates: 9)
02:14:34.022165 tst                       gprs:sysmo: Using 1 x ip_address (candidates: 9)
02:14:34.032591 tst                       gprs:sysmo: Using 1 x ip_address (candidates: 9)
02:14:34.043323 tst                       gprs:sysmo: Using 1 x ip_address (candidates: 9)
02:14:34.053951 tst                       gprs:sysmo: Using 1 x modem (candidates: 4)
02:14:34.331704 tst                       ping.py:19: start network...
02:14:34.458128 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
02:14:34.949925 run         create_hlr_db(pid=10700): Launched
02:14:35.125242 bus                          /gobi_6: Setting Powered False
02:14:36.146380 run         create_hlr_db(pid=10700): Terminated: ok {rc=0}
02:14:36.584909 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10702): Launched
02:14:36.915486 run   osmo-hlr_10.42.42.2(pid=10703): Launched
02:14:37.037752 run              osmo-stp_10.42.42.5: Starting osmo-stp
02:14:37.611018 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10705): Launched
02:14:37.941260 run   osmo-stp_10.42.42.5(pid=10706): Launched
02:14:38.060760 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
02:14:38.632647 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10708): Launched
02:14:38.749822 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
02:14:39.039543 run              patchelf(pid=10709): Launched
02:14:39.231071 run   osmo-stp_10.42.42.5(pid=10706): ERR: Terminated: ERROR {rc=1}  [trial-2353↪gprs:sysmo↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10706)]
02:14:39.371461 run   osmo-stp_10.42.42.5(pid=10706): stdout: 
| (launched: 2022-12-09_02:14:37.777093)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
02:14:39.511733 run   osmo-stp_10.42.42.5(pid=10706): stderr: 
| �[0;m�[38;5;43m20221209021437970 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221209021437970 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221209021437971 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221209021437971 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221209021437973 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221209021437974 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221209021437974 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
02:14:39.647463 run   osmo-stp_10.42.42.5(pid=10706): stdout: 
| (launched: 2022-12-09_02:14:37.777093)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
02:14:39.781973 run   osmo-stp_10.42.42.5(pid=10706): stderr: 
| �[0;m�[38;5;43m20221209021437970 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221209021437970 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221209021437971 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221209021437971 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221209021437973 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221209021437974 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221209021437974 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
02:14:39.938244 run              patchelf(pid=10709): Terminating (SIGINT)
02:14:40.121056 run              patchelf(pid=10709): Terminated: ok {rc=0}
02:14:40.153981 tst                       ping.py:22: ERR: Error: osmo-stp_10.42.42.5(pid=10706): Process ended prematurely: osmo-stp_10.42.42.5(pid=10706) [trial-2353↪gprs:sysmo↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10706)]  [trial-2353↪gprs:sysmo↪ping.py:22]
02:14:40.163114 tst                       ping.py:22: Test FAILED (6.7 sec)
02:14:40.227292 run   osmo-hlr_10.42.42.2(pid=10703): ERR: Terminated: ERROR {rc=237}  [trial-2353↪gprs:sysmo↪ping.py↪ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=10703)]
02:14:40.279038 run   osmo-hlr_10.42.42.2(pid=10703): stdout: 
| (launched: 2022-12-09_02:14:36.751677) 
02:14:40.331425 run   osmo-hlr_10.42.42.2(pid=10703): stderr: 
| �[0;m�[1;31m20221209021436955 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| �[0;m�[1;31m20221209021436956 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| �[0;m�[1;31m20221209021436956 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| �[0;m�[1;31m20221209021436956 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| �[0;m�[1;31m20221209021436956 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| �[0;m�[1;31m20221209021436956 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| �[0;m�[1;31m20221209021436968 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2353/run.2022-12-09_02-07-59/gprs:sysmo/ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| �[0;m20221209021436976 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221209021436976 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221209021436977 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
02:14:40.375765 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10702): Terminating (SIGTERM)
02:14:40.418331 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10705): Terminating (SIGTERM)
02:14:40.461056 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10708): Terminating (SIGTERM)
02:14:40.470931 ---      ParallelTerminationStrategy: PID 10702 died...
02:14:40.527672 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10702): Terminated: ok {rc=0}
02:14:40.537839 ---      ParallelTerminationStrategy: PID 10705 died...
02:14:40.594422 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10705): Terminated: ok {rc=0}
02:14:40.604767 ---      ParallelTerminationStrategy: PID 10708 died...
02:14:40.661241 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10708): Terminated: ok {rc=0}
02:14:40.748162 bus                          /gobi_6: Setting Powered False

Standard Error

Traceback (most recent call last):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run
    self.path)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file
    spec.loader.exec_module( importlib.util.module_from_spec(spec) )
  File "<frozen importlib._bootstrap_external>", line 728, in exec_module
  File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping.py", line 22, in <module>
    ggsn.start()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start
    util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf'))
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath
    proc.launch_sync()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync
    raise e
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync
    self.wait()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait
    MainLoop.wait(self.terminated, timeout=timeout)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait
    if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise
    self.poll(may_block=True)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll
    self.deferred_handling.handle_queue()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue
    handler(*args, **kwargs)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll
    raise log_module.Error('Process ended prematurely: %s' % proc.name())
osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=10706): Process ended prematurely: osmo-stp_10.42.42.5(pid=10706) [trial-2353↪gprs:sysmo↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10706)]