Skip to content
[Jenkins]Jenkins
log insign up

Failed

gprs:sysmo.ping.py (from gprs_sysmo)

Failing for the past 36 builds (Since #2331 )
Took 7 sec.

Stacktrace

osmo-stp_10.42.42.5(pid=28724): Process ended prematurely: osmo-stp_10.42.42.5(pid=28724) [trial-2366↪gprs:sysmo↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28724)]

Standard Output

----------------------------------------------
trial-2366 gprs:sysmo ping.py
----------------------------------------------
23:18:07.719599 tst                       gprs:sysmo: Using 1 x ip_address (candidates: 9)
23:18:07.731226 tst                       gprs:sysmo: Using 1 x bts (candidates: 1)
23:18:07.857767 tst                          ping.py: using LAC 24353
23:18:07.979837 tst                          ping.py: using RAC 128
23:18:08.103367 tst                          ping.py: using CellId 24353
23:18:08.225502 tst                          ping.py: using BVCI 24354
23:18:08.249533 tst                       gprs:sysmo: Using 1 x ip_address (candidates: 9)
23:18:08.260416 tst                       gprs:sysmo: Using 1 x ip_address (candidates: 9)
23:18:08.271257 tst                       gprs:sysmo: Using 1 x ip_address (candidates: 9)
23:18:08.282224 tst                       gprs:sysmo: Using 1 x ip_address (candidates: 9)
23:18:08.293080 tst                       gprs:sysmo: Using 1 x ip_address (candidates: 9)
23:18:08.303865 tst                       gprs:sysmo: Using 1 x ip_address (candidates: 9)
23:18:08.314962 tst                       gprs:sysmo: Using 1 x ip_address (candidates: 9)
23:18:08.326011 tst                       gprs:sysmo: Using 1 x modem (candidates: 4)
23:18:08.593553 tst                       ping.py:19: start network...
23:18:08.714295 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
23:18:09.181726 run         create_hlr_db(pid=28718): Launched
23:18:09.349216 bus                          /gobi_6: Setting Powered False
23:18:10.372115 run         create_hlr_db(pid=28718): Terminated: ok {rc=0}
23:18:10.759295 run pcap-recorder_any(filters='host 10.42.42.2')(pid=28720): Launched
23:18:11.049836 run   osmo-hlr_10.42.42.2(pid=28721): Launched
23:18:11.163071 run              osmo-stp_10.42.42.5: Starting osmo-stp
23:18:11.675194 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=28723): Launched
23:18:11.963637 run   osmo-stp_10.42.42.5(pid=28724): Launched
23:18:12.070178 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
23:18:12.575582 run pcap-recorder_any(filters='host 10.42.42.6')(pid=28726): Launched
23:18:12.679441 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
23:18:12.933095 run              patchelf(pid=28727): Launched
23:18:13.103947 run   osmo-stp_10.42.42.5(pid=28724): ERR: Terminated: ERROR {rc=1}  [trial-2366↪gprs:sysmo↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28724)]
23:18:13.228475 run   osmo-stp_10.42.42.5(pid=28724): stdout: 
| (launched: 2022-12-09_23:18:11.822030)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
23:18:13.353416 run   osmo-stp_10.42.42.5(pid=28724): stderr: 
| �[0;m�[38;5;43m20221209231811992 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221209231811992 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221209231811993 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221209231811993 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221209231811995 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221209231811995 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221209231811995 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
23:18:13.473926 run   osmo-stp_10.42.42.5(pid=28724): stdout: 
| (launched: 2022-12-09_23:18:11.822030)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
23:18:13.593487 run   osmo-stp_10.42.42.5(pid=28724): stderr: 
| �[0;m�[38;5;43m20221209231811992 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221209231811992 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221209231811993 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221209231811993 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221209231811995 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221209231811995 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221209231811995 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
23:18:13.732042 run              patchelf(pid=28727): Terminating (SIGINT)
23:18:13.895233 run              patchelf(pid=28727): Terminated: ok {rc=0}
23:18:13.925160 tst                       ping.py:22: ERR: Error: osmo-stp_10.42.42.5(pid=28724): Process ended prematurely: osmo-stp_10.42.42.5(pid=28724) [trial-2366↪gprs:sysmo↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28724)]  [trial-2366↪gprs:sysmo↪ping.py:22]
23:18:13.933570 tst                       ping.py:22: Test FAILED (6.2 sec)
23:18:13.992401 run   osmo-hlr_10.42.42.2(pid=28721): ERR: Terminated: ERROR {rc=237}  [trial-2366↪gprs:sysmo↪ping.py↪ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=28721)]
23:18:14.040887 run   osmo-hlr_10.42.42.2(pid=28721): stdout: 
| (launched: 2022-12-09_23:18:10.907652) 
23:18:14.090195 run   osmo-hlr_10.42.42.2(pid=28721): stderr: 
| �[0;m�[1;31m20221209231811081 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| �[0;m�[1;31m20221209231811081 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| �[0;m�[1;31m20221209231811081 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| �[0;m�[1;31m20221209231811081 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| �[0;m�[1;31m20221209231811081 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| �[0;m�[1;31m20221209231811081 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| �[0;m�[1;31m20221209231811094 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2366/run.2022-12-09_23-11-33/gprs:sysmo/ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| �[0;m20221209231811102 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221209231811102 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221209231811102 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
23:18:14.131738 run pcap-recorder_any(filters='host 10.42.42.2')(pid=28720): Terminating (SIGTERM)
23:18:14.171305 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=28723): Terminating (SIGTERM)
23:18:14.210873 run pcap-recorder_any(filters='host 10.42.42.6')(pid=28726): Terminating (SIGTERM)
23:18:14.220148 ---      ParallelTerminationStrategy: PID 28720 died...
23:18:14.273158 run pcap-recorder_any(filters='host 10.42.42.2')(pid=28720): Terminated: ok {rc=0}
23:18:14.282866 ---      ParallelTerminationStrategy: PID 28723 died...
23:18:14.335860 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=28723): Terminated: ok {rc=0}
23:18:14.345636 ---      ParallelTerminationStrategy: PID 28726 died...
23:18:14.398556 run pcap-recorder_any(filters='host 10.42.42.6')(pid=28726): Terminated: ok {rc=0}
23:18:14.485913 bus                          /gobi_6: Setting Powered False

Standard Error

Traceback (most recent call last):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run
    self.path)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file
    spec.loader.exec_module( importlib.util.module_from_spec(spec) )
  File "<frozen importlib._bootstrap_external>", line 728, in exec_module
  File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping.py", line 22, in <module>
    ggsn.start()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start
    util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf'))
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath
    proc.launch_sync()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync
    raise e
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync
    self.wait()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait
    MainLoop.wait(self.terminated, timeout=timeout)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait
    if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise
    self.poll(may_block=True)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll
    self.deferred_handling.handle_queue()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue
    handler(*args, **kwargs)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll
    raise log_module.Error('Process ended prematurely: %s' % proc.name())
osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=28724): Process ended prematurely: osmo-stp_10.42.42.5(pid=28724) [trial-2366↪gprs:sysmo↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28724)]