Skip to content
[Jenkins]Jenkins
log insign up

Failed

gprs:sysmo.ping.py (from gprs_sysmo)

Failing for the past 50 builds (Since #2331 )
Took 7 sec.

Stacktrace

osmo-stp_10.42.42.5(pid=8826): Process ended prematurely: osmo-stp_10.42.42.5(pid=8826) [trial-2380↪gprs:sysmo↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8826)]

Standard Output

----------------------------------------------
trial-2380 gprs:sysmo ping.py
----------------------------------------------
17:48:00.167791 tst                       gprs:sysmo: Using 1 x ip_address (candidates: 9)
17:48:00.179262 tst                       gprs:sysmo: Using 1 x bts (candidates: 1)
17:48:00.304224 tst                          ping.py: using LAC 30460
17:48:00.422475 tst                          ping.py: using RAC 115
17:48:00.552874 tst                          ping.py: using CellId 30460
17:48:00.679077 tst                          ping.py: using BVCI 30461
17:48:00.704346 tst                       gprs:sysmo: Using 1 x ip_address (candidates: 9)
17:48:00.715406 tst                       gprs:sysmo: Using 1 x ip_address (candidates: 9)
17:48:00.726934 tst                       gprs:sysmo: Using 1 x ip_address (candidates: 9)
17:48:00.738745 tst                       gprs:sysmo: Using 1 x ip_address (candidates: 9)
17:48:00.750790 tst                       gprs:sysmo: Using 1 x ip_address (candidates: 9)
17:48:00.762440 tst                       gprs:sysmo: Using 1 x ip_address (candidates: 9)
17:48:00.774306 tst                       gprs:sysmo: Using 1 x ip_address (candidates: 9)
17:48:00.786144 tst                       gprs:sysmo: Using 1 x modem (candidates: 4)
17:48:01.103095 tst                       ping.py:19: start network...
17:48:01.240150 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
17:48:01.800747 run          create_hlr_db(pid=8820): Launched
17:48:02.006564 bus                          /gobi_6: Setting Powered False
17:48:03.014979 run          create_hlr_db(pid=8820): Terminated: ok {rc=0}
17:48:03.427575 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8822): Launched
17:48:03.731152 run    osmo-hlr_10.42.42.2(pid=8823): Launched
17:48:03.846814 run              osmo-stp_10.42.42.5: Starting osmo-stp
17:48:04.378760 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8825): Launched
17:48:04.681497 run    osmo-stp_10.42.42.5(pid=8826): Launched
17:48:04.792607 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
17:48:05.318661 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8828): Launched
17:48:05.426172 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
17:48:05.690387 run               patchelf(pid=8829): Launched
17:48:05.867487 run    osmo-stp_10.42.42.5(pid=8826): ERR: Terminated: ERROR {rc=1}  [trial-2380↪gprs:sysmo↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8826)]
17:48:05.997477 run    osmo-stp_10.42.42.5(pid=8826): stdout: 
| (launched: 2022-12-12_17:48:04.531145)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
17:48:06.126984 run    osmo-stp_10.42.42.5(pid=8826): stderr: 
| �[0;m�[38;5;43m20221212174804699 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221212174804699 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221212174804699 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221212174804700 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221212174804700 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221212174804700 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221212174804700 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
17:48:06.252170 run    osmo-stp_10.42.42.5(pid=8826): stdout: 
| (launched: 2022-12-12_17:48:04.531145)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
17:48:06.376345 run    osmo-stp_10.42.42.5(pid=8826): stderr: 
| �[0;m�[38;5;43m20221212174804699 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221212174804699 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221212174804699 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221212174804700 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221212174804700 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221212174804700 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221212174804700 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
17:48:06.520586 run               patchelf(pid=8829): Terminating (SIGINT)
17:48:06.690116 run               patchelf(pid=8829): Terminated: ok {rc=0}
17:48:06.720985 tst                       ping.py:22: ERR: Error: osmo-stp_10.42.42.5(pid=8826): Process ended prematurely: osmo-stp_10.42.42.5(pid=8826) [trial-2380↪gprs:sysmo↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8826)]  [trial-2380↪gprs:sysmo↪ping.py:22]
17:48:06.729849 tst                       ping.py:22: Test FAILED (6.6 sec)
17:48:06.791686 run    osmo-hlr_10.42.42.2(pid=8823): ERR: Terminated: ERROR {rc=237}  [trial-2380↪gprs:sysmo↪ping.py↪ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=8823)]
17:48:06.842089 run    osmo-hlr_10.42.42.2(pid=8823): stdout: 
| (launched: 2022-12-12_17:48:03.580720) 
17:48:06.892863 run    osmo-hlr_10.42.42.2(pid=8823): stderr: 
| �[0;m�[1;31m20221212174803756 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| �[0;m�[1;31m20221212174803756 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| �[0;m�[1;31m20221212174803756 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| �[0;m�[1;31m20221212174803756 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| �[0;m�[1;31m20221212174803756 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| �[0;m�[1;31m20221212174803756 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| �[0;m�[1;31m20221212174803768 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2380/run.2022-12-12_17-41-28/gprs:sysmo/ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| �[0;m20221212174803777 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221212174803777 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221212174803777 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
17:48:06.935876 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8822): Terminating (SIGTERM)
17:48:06.977022 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8825): Terminating (SIGTERM)
17:48:07.018098 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8828): Terminating (SIGTERM)
17:48:07.028112 ---      ParallelTerminationStrategy: PID 8822 died...
17:48:07.082458 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8822): Terminated: ok {rc=0}
17:48:07.092698 ---      ParallelTerminationStrategy: PID 8825 died...
17:48:07.146969 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8825): Terminated: ok {rc=0}
17:48:07.157379 ---      ParallelTerminationStrategy: PID 8828 died...
17:48:07.211361 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8828): Terminated: ok {rc=0}
17:48:07.301428 bus                          /gobi_6: Setting Powered False

Standard Error

Traceback (most recent call last):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run
    self.path)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file
    spec.loader.exec_module( importlib.util.module_from_spec(spec) )
  File "<frozen importlib._bootstrap_external>", line 728, in exec_module
  File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping.py", line 22, in <module>
    ggsn.start()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start
    util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf'))
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath
    proc.launch_sync()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync
    raise e
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync
    self.wait()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait
    MainLoop.wait(self.terminated, timeout=timeout)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait
    if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise
    self.poll(may_block=True)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll
    self.deferred_handling.handle_queue()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue
    handler(*args, **kwargs)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll
    raise log_module.Error('Process ended prematurely: %s' % proc.name())
osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=8826): Process ended prematurely: osmo-stp_10.42.42.5(pid=8826) [trial-2380↪gprs:sysmo↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8826)]