Skip to content
[Jenkins]Jenkins
log insign up

Failed

gprs:sysmo.ping.py (from gprs_sysmo)

Failing for the past 51 builds (Since #2331 )
Took 7 sec.

Stacktrace

osmo-stp_10.42.42.5(pid=17934): Process ended prematurely: osmo-stp_10.42.42.5(pid=17934) [trial-2381↪gprs:sysmo↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=17934)]

Standard Output

----------------------------------------------
trial-2381 gprs:sysmo ping.py
----------------------------------------------
19:15:39.623442 tst                       gprs:sysmo: Using 1 x ip_address (candidates: 9)
19:15:39.635289 tst                       gprs:sysmo: Using 1 x bts (candidates: 1)
19:15:39.762340 tst                          ping.py: using LAC 30921
19:15:39.882039 tst                          ping.py: using RAC 66
19:15:40.004146 tst                          ping.py: using CellId 30921
19:15:40.126293 tst                          ping.py: using BVCI 30922
19:15:40.149554 tst                       gprs:sysmo: Using 1 x ip_address (candidates: 9)
19:15:40.160401 tst                       gprs:sysmo: Using 1 x ip_address (candidates: 9)
19:15:40.171242 tst                       gprs:sysmo: Using 1 x ip_address (candidates: 9)
19:15:40.182321 tst                       gprs:sysmo: Using 1 x ip_address (candidates: 9)
19:15:40.193710 tst                       gprs:sysmo: Using 1 x ip_address (candidates: 9)
19:15:40.204828 tst                       gprs:sysmo: Using 1 x ip_address (candidates: 9)
19:15:40.216192 tst                       gprs:sysmo: Using 1 x ip_address (candidates: 9)
19:15:40.227572 tst                       gprs:sysmo: Using 1 x modem (candidates: 4)
19:15:40.523025 tst                       ping.py:19: start network...
19:15:40.659617 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
19:15:41.175389 run         create_hlr_db(pid=17928): Launched
19:15:41.365257 bus                          /gobi_6: Setting Powered False
19:15:42.385674 run         create_hlr_db(pid=17928): Terminated: ok {rc=0}
19:15:42.798670 run pcap-recorder_any(filters='host 10.42.42.2')(pid=17930): Launched
19:15:43.103290 run   osmo-hlr_10.42.42.2(pid=17931): Launched
19:15:43.214151 run              osmo-stp_10.42.42.5: Starting osmo-stp
19:15:43.743582 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=17933): Launched
19:15:44.048897 run   osmo-stp_10.42.42.5(pid=17934): Launched
19:15:44.158438 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
19:15:44.687791 run pcap-recorder_any(filters='host 10.42.42.6')(pid=17936): Launched
19:15:44.795476 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
19:15:45.067562 run              patchelf(pid=17937): Launched
19:15:45.246207 run   osmo-stp_10.42.42.5(pid=17934): ERR: Terminated: ERROR {rc=1}  [trial-2381↪gprs:sysmo↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=17934)]
19:15:45.376216 run   osmo-stp_10.42.42.5(pid=17934): stdout: 
| (launched: 2022-12-12_19:15:43.896685)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
19:15:45.506548 run   osmo-stp_10.42.42.5(pid=17934): stderr: 
| �[0;m�[38;5;43m20221212191544065 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221212191544065 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221212191544066 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221212191544066 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221212191544067 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221212191544067 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221212191544067 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
19:15:45.632407 run   osmo-stp_10.42.42.5(pid=17934): stdout: 
| (launched: 2022-12-12_19:15:43.896685)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
19:15:45.756199 run   osmo-stp_10.42.42.5(pid=17934): stderr: 
| �[0;m�[38;5;43m20221212191544065 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221212191544065 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221212191544066 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221212191544066 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221212191544067 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221212191544067 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221212191544067 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
19:15:45.913457 run              patchelf(pid=17937): Terminating (SIGINT)
19:15:46.085878 run              patchelf(pid=17937): Terminated: ok {rc=0}
19:15:46.118120 tst                       ping.py:22: ERR: Error: osmo-stp_10.42.42.5(pid=17934): Process ended prematurely: osmo-stp_10.42.42.5(pid=17934) [trial-2381↪gprs:sysmo↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=17934)]  [trial-2381↪gprs:sysmo↪ping.py:22]
19:15:46.127710 tst                       ping.py:22: Test FAILED (6.5 sec)
19:15:46.189653 run   osmo-hlr_10.42.42.2(pid=17931): ERR: Terminated: ERROR {rc=237}  [trial-2381↪gprs:sysmo↪ping.py↪ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=17931)]
19:15:46.240345 run   osmo-hlr_10.42.42.2(pid=17931): stdout: 
| (launched: 2022-12-12_19:15:42.952119) 
19:15:46.291975 run   osmo-hlr_10.42.42.2(pid=17931): stderr: 
| �[0;m�[1;31m20221212191543127 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| �[0;m�[1;31m20221212191543127 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| �[0;m�[1;31m20221212191543127 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| �[0;m�[1;31m20221212191543127 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| �[0;m�[1;31m20221212191543127 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| �[0;m�[1;31m20221212191543127 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| �[0;m�[1;31m20221212191543139 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2381/run.2022-12-12_19-09-05/gprs:sysmo/ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| �[0;m20221212191543148 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221212191543148 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221212191543148 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
19:15:46.335830 run pcap-recorder_any(filters='host 10.42.42.2')(pid=17930): Terminating (SIGTERM)
19:15:46.377276 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=17933): Terminating (SIGTERM)
19:15:46.418419 run pcap-recorder_any(filters='host 10.42.42.6')(pid=17936): Terminating (SIGTERM)
19:15:46.427878 ---      ParallelTerminationStrategy: PID 17930 died...
19:15:46.483207 run pcap-recorder_any(filters='host 10.42.42.2')(pid=17930): Terminated: ok {rc=0}
19:15:46.493444 ---      ParallelTerminationStrategy: PID 17933 died...
19:15:46.548564 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=17933): Terminated: ok {rc=0}
19:15:46.558921 ---      ParallelTerminationStrategy: PID 17936 died...
19:15:46.615613 run pcap-recorder_any(filters='host 10.42.42.6')(pid=17936): Terminated: ok {rc=0}
19:15:46.703164 bus                          /gobi_6: Setting Powered False

Standard Error

Traceback (most recent call last):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run
    self.path)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file
    spec.loader.exec_module( importlib.util.module_from_spec(spec) )
  File "<frozen importlib._bootstrap_external>", line 728, in exec_module
  File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping.py", line 22, in <module>
    ggsn.start()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start
    util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf'))
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath
    proc.launch_sync()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync
    raise e
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync
    self.wait()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait
    MainLoop.wait(self.terminated, timeout=timeout)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait
    if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise
    self.poll(may_block=True)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll
    self.deferred_handling.handle_queue()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue
    handler(*args, **kwargs)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll
    raise log_module.Error('Process ended prematurely: %s' % proc.name())
osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=17934): Process ended prematurely: osmo-stp_10.42.42.5(pid=17934) [trial-2381↪gprs:sysmo↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=17934)]