Skip to content
[Jenkins]Jenkins
log insign up

Failed

gprs:trx-lms-limenet-micro.ping.py (from gprs_trx-lms-limenet-micro)

Failing for the past 243 builds (Since #2139 )
Took 7 sec.

Stacktrace

osmo-stp_10.42.42.5(pid=22289): Process ended prematurely: osmo-stp_10.42.42.5(pid=22289) [trial-2381↪gprs:trx-lms-limenet-micro↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=22289)]

Standard Output

----------------------------------------------
trial-2381 gprs:trx-lms-limenet-micro ping.py
----------------------------------------------
20:06:04.796335 tst       gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9)
20:06:04.807805 tst       gprs:trx-lms-limenet-micro: Using 1 x bts (candidates: 1)
20:06:04.937430 tst                          ping.py: using LAC 31189
20:06:05.059623 tst                          ping.py: using RAC 79
20:06:05.181936 tst                          ping.py: using CellId 31189
20:06:05.305079 tst                          ping.py: using BVCI 31190
20:06:05.328940 tst       gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9)
20:06:05.340315 tst       gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9)
20:06:05.351585 tst       gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9)
20:06:05.363041 tst       gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9)
20:06:05.374714 tst       gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9)
20:06:05.386163 tst       gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9)
20:06:05.397807 tst       gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9)
20:06:05.409145 tst       gprs:trx-lms-limenet-micro: Using 1 x modem (candidates: 4)
20:06:05.677554 tst                       ping.py:19: start network...
20:06:05.797405 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
20:06:06.263274 run         create_hlr_db(pid=22283): Launched
20:06:06.430864 bus                          /gobi_6: Setting Powered False
20:06:07.452465 run         create_hlr_db(pid=22283): Terminated: ok {rc=0}
20:06:07.840693 run pcap-recorder_any(filters='host 10.42.42.2')(pid=22285): Launched
20:06:08.131678 run   osmo-hlr_10.42.42.2(pid=22286): Launched
20:06:08.237499 run              osmo-stp_10.42.42.5: Starting osmo-stp
20:06:08.744794 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=22288): Launched
20:06:09.036351 run   osmo-stp_10.42.42.5(pid=22289): Launched
20:06:09.141459 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
20:06:09.648759 run pcap-recorder_any(filters='host 10.42.42.6')(pid=22291): Launched
20:06:09.752120 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
20:06:10.007443 run              patchelf(pid=22292): Launched
20:06:10.177581 run   osmo-stp_10.42.42.5(pid=22289): ERR: Terminated: ERROR {rc=1}  [trial-2381↪gprs:trx-lms-limenet-micro↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=22289)]
20:06:10.302653 run   osmo-stp_10.42.42.5(pid=22289): stdout: 
| (launched: 2022-12-12_20:06:08.891781)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
20:06:10.427454 run   osmo-stp_10.42.42.5(pid=22289): stderr: 
| �[0;m�[38;5;43m20221212200609059 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221212200609059 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221212200609059 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221212200609060 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221212200609060 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221212200609060 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221212200609060 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
20:06:10.547872 run   osmo-stp_10.42.42.5(pid=22289): stdout: 
| (launched: 2022-12-12_20:06:08.891781)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
20:06:10.667876 run   osmo-stp_10.42.42.5(pid=22289): stderr: 
| �[0;m�[38;5;43m20221212200609059 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221212200609059 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221212200609059 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221212200609060 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221212200609060 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221212200609060 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221212200609060 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
20:06:10.806925 run              patchelf(pid=22292): Terminating (SIGINT)
20:06:10.969928 run              patchelf(pid=22292): Terminated: ok {rc=0}
20:06:11.000064 tst                       ping.py:22: ERR: Error: osmo-stp_10.42.42.5(pid=22289): Process ended prematurely: osmo-stp_10.42.42.5(pid=22289) [trial-2381↪gprs:trx-lms-limenet-micro↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=22289)]  [trial-2381↪gprs:trx-lms-limenet-micro↪ping.py:22]
20:06:11.008572 tst                       ping.py:22: Test FAILED (6.2 sec)
20:06:11.068269 run   osmo-hlr_10.42.42.2(pid=22286): ERR: Terminated: ERROR {rc=237}  [trial-2381↪gprs:trx-lms-limenet-micro↪ping.py↪ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=22286)]
20:06:11.116978 run   osmo-hlr_10.42.42.2(pid=22286): stdout: 
| (launched: 2022-12-12_20:06:07.987673) 
20:06:11.166462 run   osmo-hlr_10.42.42.2(pid=22286): stderr: 
| �[0;m�[1;31m20221212200608160 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| �[0;m�[1;31m20221212200608160 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| �[0;m�[1;31m20221212200608161 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| �[0;m�[1;31m20221212200608161 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| �[0;m�[1;31m20221212200608161 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| �[0;m�[1;31m20221212200608161 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| �[0;m�[1;31m20221212200608176 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2381/run.2022-12-12_19-09-05/gprs:trx-lms-limenet-micro/ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| �[0;m20221212200608186 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221212200608186 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221212200608186 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
20:06:11.208181 run pcap-recorder_any(filters='host 10.42.42.2')(pid=22285): Terminating (SIGTERM)
20:06:11.247861 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=22288): Terminating (SIGTERM)
20:06:11.288472 run pcap-recorder_any(filters='host 10.42.42.6')(pid=22291): Terminating (SIGTERM)
20:06:11.297603 ---      ParallelTerminationStrategy: PID 22285 died...
20:06:11.350344 run pcap-recorder_any(filters='host 10.42.42.2')(pid=22285): Terminated: ok {rc=0}
20:06:11.359737 ---      ParallelTerminationStrategy: PID 22288 died...
20:06:11.412283 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=22288): Terminated: ok {rc=0}
20:06:11.421738 ---      ParallelTerminationStrategy: PID 22291 died...
20:06:11.474285 run pcap-recorder_any(filters='host 10.42.42.6')(pid=22291): Terminated: ok {rc=0}
20:06:11.557069 bus                          /gobi_6: Setting Powered False

Standard Error

Traceback (most recent call last):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run
    self.path)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file
    spec.loader.exec_module( importlib.util.module_from_spec(spec) )
  File "<frozen importlib._bootstrap_external>", line 728, in exec_module
  File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping.py", line 22, in <module>
    ggsn.start()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start
    util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf'))
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath
    proc.launch_sync()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync
    raise e
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync
    self.wait()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait
    MainLoop.wait(self.terminated, timeout=timeout)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait
    if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise
    self.poll(may_block=True)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll
    self.deferred_handling.handle_queue()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue
    handler(*args, **kwargs)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll
    raise log_module.Error('Process ended prematurely: %s' % proc.name())
osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=22289): Process ended prematurely: osmo-stp_10.42.42.5(pid=22289) [trial-2381↪gprs:trx-lms-limenet-micro↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=22289)]