Skip to content
[Jenkins]Jenkins
log insign up

Failed

gprs:trx-lms-limenet-micro.ping.py (from gprs_trx-lms-limenet-micro)

Failing for the past 246 builds (Since #2139 )
Took 7 sec.

Stacktrace

osmo-stp_10.42.42.5(pid=15375): Process ended prematurely: osmo-stp_10.42.42.5(pid=15375) [trial-2384↪gprs:trx-lms-limenet-micro↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=15375)]

Standard Output

----------------------------------------------
trial-2384 gprs:trx-lms-limenet-micro ping.py
----------------------------------------------
01:07:12.507810 tst       gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9)
01:07:12.519453 tst       gprs:trx-lms-limenet-micro: Using 1 x bts (candidates: 1)
01:07:12.654037 tst                          ping.py: using LAC 32572
01:07:12.769228 tst                          ping.py: using RAC 187
01:07:12.884777 tst                          ping.py: using CellId 32572
01:07:12.999699 tst                          ping.py: using BVCI 32573
01:07:13.022356 tst       gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9)
01:07:13.033127 tst       gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9)
01:07:13.043574 tst       gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9)
01:07:13.054164 tst       gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9)
01:07:13.064624 tst       gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9)
01:07:13.076340 tst       gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9)
01:07:13.087151 tst       gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9)
01:07:13.097991 tst       gprs:trx-lms-limenet-micro: Using 1 x modem (candidates: 4)
01:07:13.367144 tst                       ping.py:19: start network...
01:07:13.489087 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
01:07:13.963059 run         create_hlr_db(pid=15369): Launched
01:07:14.133661 bus                          /gobi_6: Setting Powered False
01:07:15.154048 run         create_hlr_db(pid=15369): Terminated: ok {rc=0}
01:07:15.577674 run pcap-recorder_any(filters='host 10.42.42.2')(pid=15371): Launched
01:07:15.943937 run   osmo-hlr_10.42.42.2(pid=15372): Launched
01:07:16.120543 run              osmo-stp_10.42.42.5: Starting osmo-stp
01:07:16.771370 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=15374): Launched
01:07:17.116338 run   osmo-stp_10.42.42.5(pid=15375): Launched
01:07:17.234705 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
01:07:17.879824 run pcap-recorder_any(filters='host 10.42.42.6')(pid=15377): Launched
01:07:17.985970 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
01:07:18.245791 run              patchelf(pid=15378): Launched
01:07:18.419179 run   osmo-stp_10.42.42.5(pid=15375): ERR: Terminated: ERROR {rc=1}  [trial-2384↪gprs:trx-lms-limenet-micro↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=15375)]
01:07:18.546080 run   osmo-stp_10.42.42.5(pid=15375): stdout: 
| (launched: 2022-12-13_01:07:16.935519)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
01:07:18.673115 run   osmo-stp_10.42.42.5(pid=15375): stderr: 
| �[0;m�[38;5;43m20221213010717268 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221213010717268 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221213010717268 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221213010717269 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221213010717269 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221213010717269 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221213010717270 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
01:07:18.795559 run   osmo-stp_10.42.42.5(pid=15375): stdout: 
| (launched: 2022-12-13_01:07:16.935519)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
01:07:18.916902 run   osmo-stp_10.42.42.5(pid=15375): stderr: 
| �[0;m�[38;5;43m20221213010717268 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221213010717268 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221213010717268 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221213010717269 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221213010717269 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221213010717269 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221213010717270 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
01:07:19.058726 run              patchelf(pid=15378): Terminating (SIGINT)
01:07:19.226363 run              patchelf(pid=15378): Terminated: ok {rc=0}
01:07:19.256712 tst                       ping.py:22: ERR: Error: osmo-stp_10.42.42.5(pid=15375): Process ended prematurely: osmo-stp_10.42.42.5(pid=15375) [trial-2384↪gprs:trx-lms-limenet-micro↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=15375)]  [trial-2384↪gprs:trx-lms-limenet-micro↪ping.py:22]
01:07:19.265161 tst                       ping.py:22: Test FAILED (6.7 sec)
01:07:19.324213 run   osmo-hlr_10.42.42.2(pid=15372): ERR: Terminated: ERROR {rc=237}  [trial-2384↪gprs:trx-lms-limenet-micro↪ping.py↪ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=15372)]
01:07:19.373058 run   osmo-hlr_10.42.42.2(pid=15372): stdout: 
| (launched: 2022-12-13_01:07:15.739363) 
01:07:19.422980 run   osmo-hlr_10.42.42.2(pid=15372): stderr: 
| �[0;m�[1;31m20221213010716061 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| �[0;m�[1;31m20221213010716061 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| �[0;m�[1;31m20221213010716061 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| �[0;m�[1;31m20221213010716061 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| �[0;m�[1;31m20221213010716061 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| �[0;m�[1;31m20221213010716061 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| �[0;m�[1;31m20221213010716082 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2384/run.2022-12-13_00-09-58/gprs:trx-lms-limenet-micro/ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| �[0;m20221213010716109 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221213010716109 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221213010716109 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
01:07:19.464935 run pcap-recorder_any(filters='host 10.42.42.2')(pid=15371): Terminating (SIGTERM)
01:07:19.504391 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=15374): Terminating (SIGTERM)
01:07:19.543843 run pcap-recorder_any(filters='host 10.42.42.6')(pid=15377): Terminating (SIGTERM)
01:07:19.553041 ---      ParallelTerminationStrategy: PID 15371 died...
01:07:19.606095 run pcap-recorder_any(filters='host 10.42.42.2')(pid=15371): Terminated: ok {rc=0}
01:07:19.615615 ---      ParallelTerminationStrategy: PID 15374 died...
01:07:19.668278 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=15374): Terminated: ok {rc=0}
01:07:19.677859 ---      ParallelTerminationStrategy: PID 15377 died...
01:07:19.730568 run pcap-recorder_any(filters='host 10.42.42.6')(pid=15377): Terminated: ok {rc=0}
01:07:19.813636 bus                          /gobi_6: Setting Powered False

Standard Error

Traceback (most recent call last):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run
    self.path)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file
    spec.loader.exec_module( importlib.util.module_from_spec(spec) )
  File "<frozen importlib._bootstrap_external>", line 728, in exec_module
  File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping.py", line 22, in <module>
    ggsn.start()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start
    util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf'))
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath
    proc.launch_sync()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync
    raise e
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync
    self.wait()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait
    MainLoop.wait(self.terminated, timeout=timeout)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait
    if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise
    self.poll(may_block=True)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll
    self.deferred_handling.handle_queue()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue
    handler(*args, **kwargs)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll
    raise log_module.Error('Process ended prematurely: %s' % proc.name())
osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=15375): Process ended prematurely: osmo-stp_10.42.42.5(pid=15375) [trial-2384↪gprs:trx-lms-limenet-micro↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=15375)]