Skip to content
[Jenkins]Jenkins
log insign up

Failed

gprs:trx-b200.iperf3.py (from gprs_trx-b200)

Failing for the past 71 builds (Since #2318 )
Took 8 sec.

Stacktrace

osmo-stp_10.42.42.5(pid=8914): Process ended prematurely: osmo-stp_10.42.42.5(pid=8914) [trial-2388↪gprs:trx-b200↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8914)]

Standard Output

----------------------------------------------
trial-2388 gprs:trx-b200 iperf3.py
----------------------------------------------
10:27:52.928546 tst                    gprs:trx-b200: Using 1 x ip_address (candidates: 9)
10:27:52.940486 tst                    gprs:trx-b200: Using 1 x bts (candidates: 1)
10:27:53.091803 tst                        iperf3.py: using LAC 33312
10:27:53.224146 tst                        iperf3.py: using RAC 162
10:27:53.356771 tst                        iperf3.py: using CellId 33312
10:27:53.489112 tst                        iperf3.py: using BVCI 33313
10:27:53.514670 tst                    gprs:trx-b200: Using 1 x ip_address (candidates: 9)
10:27:53.526233 tst                    gprs:trx-b200: Using 1 x ip_address (candidates: 9)
10:27:53.537284 tst                    gprs:trx-b200: Using 1 x ip_address (candidates: 9)
10:27:53.548270 tst                    gprs:trx-b200: Using 1 x ip_address (candidates: 9)
10:27:53.559513 tst                    gprs:trx-b200: Using 1 x ip_address (candidates: 9)
10:27:53.570734 tst                    gprs:trx-b200: Using 1 x ip_address (candidates: 9)
10:27:53.582615 tst                    gprs:trx-b200: Using 1 x ip_address (candidates: 9)
10:27:53.593789 tst                    gprs:trx-b200: Using 1 x ip_address (candidates: 9)
10:27:53.605305 tst                    gprs:trx-b200: Using 1 x modem (candidates: 4)
10:27:53.908279 tst                      iperf3.py:8: start iperfv3 server 10.42.42.10:5003...
10:27:54.048779 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
10:27:54.396620 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8906): Launched
10:27:54.685858 run iperf3-srv_10.42.42.10(pid=8907): Launched
10:27:54.890027 tst                      iperf3.py:8: start network...
10:27:55.029772 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
10:27:55.557777 run          create_hlr_db(pid=8908): Launched
10:27:55.750786 bus                          /gobi_6: Setting Powered False
10:27:56.771716 run          create_hlr_db(pid=8908): Terminated: ok {rc=0}
10:27:57.192939 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8910): Launched
10:27:57.508446 run    osmo-hlr_10.42.42.2(pid=8911): Launched
10:27:57.623891 run              osmo-stp_10.42.42.5: Starting osmo-stp
10:27:58.169254 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8913): Launched
10:27:58.484282 run    osmo-stp_10.42.42.5(pid=8914): Launched
10:27:58.599201 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
10:27:59.145124 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8916): Launched
10:27:59.255934 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
10:27:59.529452 run               patchelf(pid=8917): Launched
10:27:59.711237 run    osmo-stp_10.42.42.5(pid=8914): ERR: Terminated: ERROR {rc=1}  [trial-2388↪gprs:trx-b200↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8914)]
10:27:59.844223 run    osmo-stp_10.42.42.5(pid=8914): stdout: 
| (launched: 2022-12-13_10:27:58.327955)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
10:27:59.977533 run    osmo-stp_10.42.42.5(pid=8914): stderr: 
| �[0;m�[38;5;43m20221213102758499 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221213102758499 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221213102758499 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221213102758500 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221213102758500 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221213102758500 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221213102758501 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
10:28:00.105914 run    osmo-stp_10.42.42.5(pid=8914): stdout: 
| (launched: 2022-12-13_10:27:58.327955)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
10:28:00.232932 run    osmo-stp_10.42.42.5(pid=8914): stderr: 
| �[0;m�[38;5;43m20221213102758499 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221213102758499 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221213102758499 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221213102758500 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221213102758500 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221213102758500 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221213102758501 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
10:28:00.381757 run               patchelf(pid=8917): Terminating (SIGINT)
10:28:00.557605 run               patchelf(pid=8917): Terminated: ok {rc=0}
10:28:00.589898 tst                      iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=8914): Process ended prematurely: osmo-stp_10.42.42.5(pid=8914) [trial-2388↪gprs:trx-b200↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8914)]  [trial-2388↪gprs:trx-b200↪iperf3.py:8]
10:28:00.598980 tst                      iperf3.py:8: Test FAILED (7.7 sec)
10:28:00.659546 run    osmo-hlr_10.42.42.2(pid=8911): ERR: Terminated: ERROR {rc=237}  [trial-2388↪gprs:trx-b200↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=8911)]
10:28:00.708931 run    osmo-hlr_10.42.42.2(pid=8911): stdout: 
| (launched: 2022-12-13_10:27:57.351317) 
10:28:00.759354 run    osmo-hlr_10.42.42.2(pid=8911): stderr: 
| �[0;m�[1;31m20221213102757530 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| �[0;m�[1;31m20221213102757530 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| �[0;m�[1;31m20221213102757530 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| �[0;m�[1;31m20221213102757530 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| �[0;m�[1;31m20221213102757530 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| �[0;m�[1;31m20221213102757530 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| �[0;m�[1;31m20221213102757542 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2388/run.2022-12-13_10-04-59/gprs:trx-b200/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| �[0;m20221213102757551 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221213102757551 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221213102757551 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
10:28:00.801765 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8906): Terminating (SIGTERM)
10:28:00.841707 run iperf3-srv_10.42.42.10(pid=8907): Terminating (SIGTERM)
10:28:00.884339 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8910): Terminating (SIGTERM)
10:28:00.926959 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8913): Terminating (SIGTERM)
10:28:00.975060 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8916): Terminating (SIGTERM)
10:28:00.984802 ---      ParallelTerminationStrategy: PID 8906 died...
10:28:01.041006 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8906): Terminated: ok {rc=0}
10:28:01.051488 ---      ParallelTerminationStrategy: PID 8907 died...
10:28:01.106738 run iperf3-srv_10.42.42.10(pid=8907): Terminated {rc=256}
10:28:01.116781 ---      ParallelTerminationStrategy: PID 8910 died...
10:28:01.171068 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8910): Terminated: ok {rc=0}
10:28:01.181156 ---      ParallelTerminationStrategy: PID 8913 died...
10:28:01.235547 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8913): Terminated: ok {rc=0}
10:28:01.245679 ---      ParallelTerminationStrategy: PID 8916 died...
10:28:01.300268 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8916): Terminated: ok {rc=0}
10:28:01.386538 bus                          /gobi_6: Setting Powered False

Standard Error

Traceback (most recent call last):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run
    self.path)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file
    spec.loader.exec_module( importlib.util.module_from_spec(spec) )
  File "<frozen importlib._bootstrap_external>", line 728, in exec_module
  File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module>
    setup_run_iperf3_test_parallel(1)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel
    ggsn.start()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start
    util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf'))
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath
    proc.launch_sync()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync
    raise e
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync
    self.wait()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait
    MainLoop.wait(self.terminated, timeout=timeout)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait
    if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise
    self.poll(may_block=True)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll
    self.deferred_handling.handle_queue()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue
    handler(*args, **kwargs)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll
    raise log_module.Error('Process ended prematurely: %s' % proc.name())
osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=8914): Process ended prematurely: osmo-stp_10.42.42.5(pid=8914) [trial-2388↪gprs:trx-b200↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8914)]