Skip to content
[Jenkins]Jenkins
log insign up

Failed

gprs:trx-lms-limenet-micro.ping.py (from gprs_trx-lms-limenet-micro)

Failing for the past 252 builds (Since #2139 )
Took 7 sec.

Stacktrace

osmo-stp_10.42.42.5(pid=29026): Process ended prematurely: osmo-stp_10.42.42.5(pid=29026) [trial-2390↪gprs:trx-lms-limenet-micro↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=29026)]

Standard Output

----------------------------------------------
trial-2390 gprs:trx-lms-limenet-micro ping.py
----------------------------------------------
13:58:20.555965 tst       gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9)
13:58:20.568789 tst       gprs:trx-lms-limenet-micro: Using 1 x bts (candidates: 1)
13:58:20.701130 tst                          ping.py: using LAC 34416
13:58:20.818951 tst                          ping.py: using RAC 246
13:58:20.935310 tst                          ping.py: using CellId 34416
13:58:21.067178 tst                          ping.py: using BVCI 34417
13:58:21.091498 tst       gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9)
13:58:21.102935 tst       gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9)
13:58:21.114051 tst       gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9)
13:58:21.125352 tst       gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9)
13:58:21.136693 tst       gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9)
13:58:21.147995 tst       gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9)
13:58:21.159575 tst       gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9)
13:58:21.170857 tst       gprs:trx-lms-limenet-micro: Using 1 x modem (candidates: 4)
13:58:21.442391 tst                       ping.py:19: start network...
13:58:21.563934 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
13:58:22.034081 run         create_hlr_db(pid=29020): Launched
13:58:22.203704 bus                          /gobi_6: Setting Powered False
13:58:23.235600 run         create_hlr_db(pid=29020): Terminated: ok {rc=0}
13:58:23.657058 run pcap-recorder_any(filters='host 10.42.42.2')(pid=29022): Launched
13:58:23.973247 run   osmo-hlr_10.42.42.2(pid=29023): Launched
13:58:24.089887 run              osmo-stp_10.42.42.5: Starting osmo-stp
13:58:24.642347 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=29025): Launched
13:58:24.959394 run   osmo-stp_10.42.42.5(pid=29026): Launched
13:58:25.073812 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
13:58:25.624560 run pcap-recorder_any(filters='host 10.42.42.6')(pid=29028): Launched
13:58:25.737585 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
13:58:26.000545 run              patchelf(pid=29029): Launched
13:58:26.172306 run   osmo-stp_10.42.42.5(pid=29026): ERR: Terminated: ERROR {rc=1}  [trial-2390↪gprs:trx-lms-limenet-micro↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=29026)]
13:58:26.298085 run   osmo-stp_10.42.42.5(pid=29026): stdout: 
| (launched: 2022-12-13_13:58:24.802230)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
13:58:26.423988 run   osmo-stp_10.42.42.5(pid=29026): stderr: 
| �[0;m�[38;5;43m20221213135824991 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221213135824991 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221213135824991 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221213135824992 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221213135824992 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221213135824992 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221213135824992 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
13:58:26.545289 run   osmo-stp_10.42.42.5(pid=29026): stdout: 
| (launched: 2022-12-13_13:58:24.802230)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
13:58:26.666077 run   osmo-stp_10.42.42.5(pid=29026): stderr: 
| �[0;m�[38;5;43m20221213135824991 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221213135824991 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221213135824991 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221213135824992 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221213135824992 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221213135824992 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221213135824992 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
13:58:26.806119 run              patchelf(pid=29029): Terminating (SIGINT)
13:58:26.971526 run              patchelf(pid=29029): Terminated: ok {rc=0}
13:58:27.001873 tst                       ping.py:22: ERR: Error: osmo-stp_10.42.42.5(pid=29026): Process ended prematurely: osmo-stp_10.42.42.5(pid=29026) [trial-2390↪gprs:trx-lms-limenet-micro↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=29026)]  [trial-2390↪gprs:trx-lms-limenet-micro↪ping.py:22]
13:58:27.010540 tst                       ping.py:22: Test FAILED (6.4 sec)
13:58:27.069012 run   osmo-hlr_10.42.42.2(pid=29023): ERR: Terminated: ERROR {rc=237}  [trial-2390↪gprs:trx-lms-limenet-micro↪ping.py↪ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=29023)]
13:58:27.117161 run   osmo-hlr_10.42.42.2(pid=29023): stdout: 
| (launched: 2022-12-13_13:58:23.817905) 
13:58:27.165708 run   osmo-hlr_10.42.42.2(pid=29023): stderr: 
| �[0;m�[1;31m20221213135824012 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| �[0;m�[1;31m20221213135824012 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| �[0;m�[1;31m20221213135824012 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| �[0;m�[1;31m20221213135824012 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| �[0;m�[1;31m20221213135824012 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| �[0;m�[1;31m20221213135824012 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| �[0;m�[1;31m20221213135824024 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2390/run.2022-12-13_13-01-08/gprs:trx-lms-limenet-micro/ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| �[0;m20221213135824032 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221213135824032 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221213135824032 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
13:58:27.207914 run pcap-recorder_any(filters='host 10.42.42.2')(pid=29022): Terminating (SIGTERM)
13:58:27.247245 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=29025): Terminating (SIGTERM)
13:58:27.286521 run pcap-recorder_any(filters='host 10.42.42.6')(pid=29028): Terminating (SIGTERM)
13:58:27.295635 ---      ParallelTerminationStrategy: PID 29022 died...
13:58:27.348389 run pcap-recorder_any(filters='host 10.42.42.2')(pid=29022): Terminated: ok {rc=0}
13:58:27.357942 ---      ParallelTerminationStrategy: PID 29025 died...
13:58:27.410209 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=29025): Terminated: ok {rc=0}
13:58:27.419635 ---      ParallelTerminationStrategy: PID 29028 died...
13:58:27.471801 run pcap-recorder_any(filters='host 10.42.42.6')(pid=29028): Terminated: ok {rc=0}
13:58:27.558404 bus                          /gobi_6: Setting Powered False

Standard Error

Traceback (most recent call last):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run
    self.path)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file
    spec.loader.exec_module( importlib.util.module_from_spec(spec) )
  File "<frozen importlib._bootstrap_external>", line 728, in exec_module
  File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping.py", line 22, in <module>
    ggsn.start()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start
    util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf'))
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath
    proc.launch_sync()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync
    raise e
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync
    self.wait()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait
    MainLoop.wait(self.terminated, timeout=timeout)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait
    if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise
    self.poll(may_block=True)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll
    self.deferred_handling.handle_queue()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue
    handler(*args, **kwargs)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll
    raise log_module.Error('Process ended prematurely: %s' % proc.name())
osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=29026): Process ended prematurely: osmo-stp_10.42.42.5(pid=29026) [trial-2390↪gprs:trx-lms-limenet-micro↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=29026)]