Skip to content
[Jenkins]Jenkins
log insign up

Failed

gprs:sysmo.ping.py (from gprs_sysmo)

Failing for the past 63 builds (Since #2331 )
Took 7 sec.

Stacktrace

osmo-stp_10.42.42.5(pid=18734): Process ended prematurely: osmo-stp_10.42.42.5(pid=18734) [trial-2393↪gprs:sysmo↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18734)]

Standard Output

----------------------------------------------
trial-2393 gprs:sysmo ping.py
----------------------------------------------
18:45:08.008180 tst                       gprs:sysmo: Using 1 x ip_address (candidates: 9)
18:45:08.019561 tst                       gprs:sysmo: Using 1 x bts (candidates: 1)
18:45:08.153004 tst                          ping.py: using LAC 35531
18:45:08.278524 tst                          ping.py: using RAC 86
18:45:08.405369 tst                          ping.py: using CellId 35531
18:45:08.530786 tst                          ping.py: using BVCI 35532
18:45:08.555351 tst                       gprs:sysmo: Using 1 x ip_address (candidates: 9)
18:45:08.566621 tst                       gprs:sysmo: Using 1 x ip_address (candidates: 9)
18:45:08.577623 tst                       gprs:sysmo: Using 1 x ip_address (candidates: 9)
18:45:08.588550 tst                       gprs:sysmo: Using 1 x ip_address (candidates: 9)
18:45:08.599645 tst                       gprs:sysmo: Using 1 x ip_address (candidates: 9)
18:45:08.610803 tst                       gprs:sysmo: Using 1 x ip_address (candidates: 9)
18:45:08.622162 tst                       gprs:sysmo: Using 1 x ip_address (candidates: 9)
18:45:08.633490 tst                       gprs:sysmo: Using 1 x modem (candidates: 4)
18:45:08.909903 tst                       ping.py:19: start network...
18:45:09.034830 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
18:45:09.515845 run         create_hlr_db(pid=18728): Launched
18:45:09.688118 bus                          /gobi_6: Setting Powered False
18:45:10.709306 run         create_hlr_db(pid=18728): Terminated: ok {rc=0}
18:45:11.136934 run pcap-recorder_any(filters='host 10.42.42.2')(pid=18730): Launched
18:45:11.460242 run   osmo-hlr_10.42.42.2(pid=18731): Launched
18:45:11.574193 run              osmo-stp_10.42.42.5: Starting osmo-stp
18:45:12.094214 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=18733): Launched
18:45:12.392216 run   osmo-stp_10.42.42.5(pid=18734): Launched
18:45:12.499129 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
18:45:13.019484 run pcap-recorder_any(filters='host 10.42.42.6')(pid=18736): Launched
18:45:13.126108 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
18:45:13.386720 run              patchelf(pid=18737): Launched
18:45:13.562345 run   osmo-stp_10.42.42.5(pid=18734): ERR: Terminated: ERROR {rc=1}  [trial-2393↪gprs:sysmo↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18734)]
18:45:13.690517 run   osmo-stp_10.42.42.5(pid=18734): stdout: 
| (launched: 2022-12-13_18:45:12.245702)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
18:45:13.819168 run   osmo-stp_10.42.42.5(pid=18734): stderr: 
| �[0;m�[38;5;43m20221213184512415 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221213184512415 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221213184512415 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221213184512416 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221213184512416 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221213184512416 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221213184512416 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
18:45:13.943411 run   osmo-stp_10.42.42.5(pid=18734): stdout: 
| (launched: 2022-12-13_18:45:12.245702)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
18:45:14.066274 run   osmo-stp_10.42.42.5(pid=18734): stderr: 
| �[0;m�[38;5;43m20221213184512415 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221213184512415 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221213184512415 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221213184512416 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221213184512416 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221213184512416 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221213184512416 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
18:45:14.208862 run              patchelf(pid=18737): Terminating (SIGINT)
18:45:14.376349 run              patchelf(pid=18737): Terminated: ok {rc=0}
18:45:14.406707 tst                       ping.py:22: ERR: Error: osmo-stp_10.42.42.5(pid=18734): Process ended prematurely: osmo-stp_10.42.42.5(pid=18734) [trial-2393↪gprs:sysmo↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18734)]  [trial-2393↪gprs:sysmo↪ping.py:22]
18:45:14.415362 tst                       ping.py:22: Test FAILED (6.4 sec)
18:45:14.475205 run   osmo-hlr_10.42.42.2(pid=18731): ERR: Terminated: ERROR {rc=237}  [trial-2393↪gprs:sysmo↪ping.py↪ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=18731)]
18:45:14.524088 run   osmo-hlr_10.42.42.2(pid=18731): stdout: 
| (launched: 2022-12-13_18:45:11.302470) 
18:45:14.573953 run   osmo-hlr_10.42.42.2(pid=18731): stderr: 
| �[0;m�[1;31m20221213184511499 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| �[0;m�[1;31m20221213184511499 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| �[0;m�[1;31m20221213184511499 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| �[0;m�[1;31m20221213184511499 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| �[0;m�[1;31m20221213184511499 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| �[0;m�[1;31m20221213184511499 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| �[0;m�[1;31m20221213184511511 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2393/run.2022-12-13_18-38-33/gprs:sysmo/ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| �[0;m20221213184511519 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221213184511520 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221213184511520 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
18:45:14.615976 run pcap-recorder_any(filters='host 10.42.42.2')(pid=18730): Terminating (SIGTERM)
18:45:14.655701 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=18733): Terminating (SIGTERM)
18:45:14.695279 run pcap-recorder_any(filters='host 10.42.42.6')(pid=18736): Terminating (SIGTERM)
18:45:14.704200 ---      ParallelTerminationStrategy: PID 18730 died...
18:45:14.757526 run pcap-recorder_any(filters='host 10.42.42.2')(pid=18730): Terminated: ok {rc=0}
18:45:14.767265 ---      ParallelTerminationStrategy: PID 18733 died...
18:45:14.820924 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=18733): Terminated: ok {rc=0}
18:45:14.830578 ---      ParallelTerminationStrategy: PID 18736 died...
18:45:14.884000 run pcap-recorder_any(filters='host 10.42.42.6')(pid=18736): Terminated: ok {rc=0}
18:45:14.972636 bus                          /gobi_6: Setting Powered False

Standard Error

Traceback (most recent call last):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run
    self.path)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file
    spec.loader.exec_module( importlib.util.module_from_spec(spec) )
  File "<frozen importlib._bootstrap_external>", line 728, in exec_module
  File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping.py", line 22, in <module>
    ggsn.start()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start
    util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf'))
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath
    proc.launch_sync()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync
    raise e
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync
    self.wait()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait
    MainLoop.wait(self.terminated, timeout=timeout)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait
    if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise
    self.poll(may_block=True)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll
    self.deferred_handling.handle_queue()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue
    handler(*args, **kwargs)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll
    raise log_module.Error('Process ended prematurely: %s' % proc.name())
osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=18734): Process ended prematurely: osmo-stp_10.42.42.5(pid=18734) [trial-2393↪gprs:sysmo↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18734)]