Skip to content
[Jenkins]Jenkins
log insign up

Failed

gprs:trx-lms-limenet-micro.ping.py (from gprs_trx-lms-limenet-micro)

Failing for the past 255 builds (Since #2139 )
Took 7 sec.

Stacktrace

osmo-stp_10.42.42.5(pid=23084): Process ended prematurely: osmo-stp_10.42.42.5(pid=23084) [trial-2393↪gprs:trx-lms-limenet-micro↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=23084)]

Standard Output

----------------------------------------------
trial-2393 gprs:trx-lms-limenet-micro ping.py
----------------------------------------------
19:35:40.871579 tst       gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9)
19:35:40.883454 tst       gprs:trx-lms-limenet-micro: Using 1 x bts (candidates: 1)
19:35:41.013939 tst                          ping.py: using LAC 35799
19:35:41.129312 tst                          ping.py: using RAC 99
19:35:41.243477 tst                          ping.py: using CellId 35799
19:35:41.357585 tst                          ping.py: using BVCI 35800
19:35:41.379724 tst       gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9)
19:35:41.390701 tst       gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9)
19:35:41.401449 tst       gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9)
19:35:41.412110 tst       gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9)
19:35:41.423140 tst       gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9)
19:35:41.434055 tst       gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9)
19:35:41.445157 tst       gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9)
19:35:41.455654 tst       gprs:trx-lms-limenet-micro: Using 1 x modem (candidates: 4)
19:35:41.727199 tst                       ping.py:19: start network...
19:35:41.847960 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
19:35:42.313723 run         create_hlr_db(pid=23078): Launched
19:35:42.480586 bus                          /gobi_6: Setting Powered False
19:35:43.513821 run         create_hlr_db(pid=23078): Terminated: ok {rc=0}
19:35:43.905658 run pcap-recorder_any(filters='host 10.42.42.2')(pid=23080): Launched
19:35:44.196675 run   osmo-hlr_10.42.42.2(pid=23081): Launched
19:35:44.309874 run              osmo-stp_10.42.42.5: Starting osmo-stp
19:35:44.824687 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=23083): Launched
19:35:45.113914 run   osmo-stp_10.42.42.5(pid=23084): Launched
19:35:45.217978 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
19:35:45.725223 run pcap-recorder_any(filters='host 10.42.42.6')(pid=23086): Launched
19:35:45.829318 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
19:35:46.127126 run              patchelf(pid=23087): Launched
19:35:46.300273 run   osmo-stp_10.42.42.5(pid=23084): ERR: Terminated: ERROR {rc=1}  [trial-2393↪gprs:trx-lms-limenet-micro↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=23084)]
19:35:46.427970 run   osmo-stp_10.42.42.5(pid=23084): stdout: 
| (launched: 2022-12-13_19:35:44.972018)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
19:35:46.555394 run   osmo-stp_10.42.42.5(pid=23084): stderr: 
| �[0;m�[38;5;43m20221213193545137 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221213193545137 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221213193545138 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221213193545138 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221213193545138 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221213193545139 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221213193545139 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
19:35:46.678389 run   osmo-stp_10.42.42.5(pid=23084): stdout: 
| (launched: 2022-12-13_19:35:44.972018)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
19:35:46.800899 run   osmo-stp_10.42.42.5(pid=23084): stderr: 
| �[0;m�[38;5;43m20221213193545137 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221213193545137 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221213193545138 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221213193545138 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221213193545138 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221213193545139 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221213193545139 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
19:35:46.942776 run              patchelf(pid=23087): Terminating (SIGINT)
19:35:47.109183 run              patchelf(pid=23087): Terminated: ok {rc=0}
19:35:47.140109 tst                       ping.py:22: ERR: Error: osmo-stp_10.42.42.5(pid=23084): Process ended prematurely: osmo-stp_10.42.42.5(pid=23084) [trial-2393↪gprs:trx-lms-limenet-micro↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=23084)]  [trial-2393↪gprs:trx-lms-limenet-micro↪ping.py:22]
19:35:47.149282 tst                       ping.py:22: Test FAILED (6.3 sec)
19:35:47.208766 run   osmo-hlr_10.42.42.2(pid=23081): ERR: Terminated: ERROR {rc=237}  [trial-2393↪gprs:trx-lms-limenet-micro↪ping.py↪ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=23081)]
19:35:47.257576 run   osmo-hlr_10.42.42.2(pid=23081): stdout: 
| (launched: 2022-12-13_19:35:44.054491) 
19:35:47.306893 run   osmo-hlr_10.42.42.2(pid=23081): stderr: 
| �[0;m�[1;31m20221213193544225 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| �[0;m�[1;31m20221213193544225 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| �[0;m�[1;31m20221213193544225 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| �[0;m�[1;31m20221213193544225 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| �[0;m�[1;31m20221213193544225 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| �[0;m�[1;31m20221213193544225 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| �[0;m�[1;31m20221213193544237 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2393/run.2022-12-13_18-38-33/gprs:trx-lms-limenet-micro/ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| �[0;m20221213193544248 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221213193544249 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221213193544249 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
19:35:47.349275 run pcap-recorder_any(filters='host 10.42.42.2')(pid=23080): Terminating (SIGTERM)
19:35:47.389069 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=23083): Terminating (SIGTERM)
19:35:47.428599 run pcap-recorder_any(filters='host 10.42.42.6')(pid=23086): Terminating (SIGTERM)
19:35:47.437808 ---      ParallelTerminationStrategy: PID 23080 died...
19:35:47.490896 run pcap-recorder_any(filters='host 10.42.42.2')(pid=23080): Terminated: ok {rc=0}
19:35:47.500460 ---      ParallelTerminationStrategy: PID 23083 died...
19:35:47.553142 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=23083): Terminated: ok {rc=0}
19:35:47.562687 ---      ParallelTerminationStrategy: PID 23086 died...
19:35:47.615203 run pcap-recorder_any(filters='host 10.42.42.6')(pid=23086): Terminated: ok {rc=0}
19:35:47.701993 bus                          /gobi_6: Setting Powered False

Standard Error

Traceback (most recent call last):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run
    self.path)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file
    spec.loader.exec_module( importlib.util.module_from_spec(spec) )
  File "<frozen importlib._bootstrap_external>", line 728, in exec_module
  File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping.py", line 22, in <module>
    ggsn.start()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start
    util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf'))
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath
    proc.launch_sync()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync
    raise e
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync
    self.wait()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait
    MainLoop.wait(self.terminated, timeout=timeout)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait
    if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise
    self.poll(may_block=True)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll
    self.deferred_handling.handle_queue()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue
    handler(*args, **kwargs)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll
    raise log_module.Error('Process ended prematurely: %s' % proc.name())
osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=23084): Process ended prematurely: osmo-stp_10.42.42.5(pid=23084) [trial-2393↪gprs:trx-lms-limenet-micro↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=23084)]