!
! OpenBSC (0.9.11.308-62d46) configuration saved from vty
!!
password foo
!
line vty
 no login
!
log stderr
 logging color 1
 logging print category-hex 0
 logging print category 1
 logging timestamp 0
 logging print file basename last
 logging print level 1
 logging level lmi info
 logging level linp info
 logging level nm debug
 logging level rsl debug
 logging level llapd notice
network
 network country code 901
 mobile network code 70
 neci 0
 paging any use tch 0
 handover 0
 handover window rxlev averaging 10
 handover window rxqual averaging 1
 handover window rxlev neighbor averaging 10
 handover power budget interval 6
 handover power budget hysteresis 3
 handover maximum distance 9999
 timer t3101 10
 timer t3105 40
 timer t3109 4
 timer t3113 60
 pcu-socket /tmp/pcu_bts
 bts 0
  type rbs2000
  band GSM900
  om2000 version-limit oml gen 12 rev 10
  cell_identity 0
  location_area_code 0x0001
  training_sequence_code 7
  base_station_id_code 63
  ms max power 15
  cell reselection hysteresis 4
  rxlev access min 0
  channel allocator mode set-all descending
  rach tx integer 9
  rach max transmission 7
  oml e1 line 0 timeslot 1 sub-slot full
  oml e1 tei 62
  neighbor-list mode automatic
  gprs mode egprs
  gprs routing area 0
  gprs network-control-order nc0
  gprs cell bvci 2
  gprs nsei 101
  gprs nsvc 0 nsvci 101
  gprs nsvc 0 local udp port 23100
  gprs nsvc 0 remote udp port 23000
  gprs nsvc 0 remote ip 127.0.0.1
  is-connection-list add 4 712 36
  trx 0
   rf_locked 0
   arfcn 123
   nominal power 44
   max_power_red 0
   rsl e1 line 0 timeslot 1 sub-slot full
   rsl e1 tei 0
   timeslot 0
    phys_chan_config CCCH+SDCCH4
    hopping enabled 0
    e1 line 0 timeslot 1 sub-slot full
   timeslot 1
    phys_chan_config TCH/F
    hopping enabled 0
    e1 line 0 timeslot 3 sub-slot full
   timeslot 2
    phys_chan_config TCH/F
    hopping enabled 0
    e1 line 0 timeslot 4 sub-slot full
   timeslot 3
    phys_chan_config TCH/F
    hopping enabled 0
    e1 line 0 timeslot 5 sub-slot full
   timeslot 4
    phys_chan_config TCH/F_TCH/H_SDCCH8_PDCH
    hopping enabled 0
    e1 line 0 timeslot 6 sub-slot full
   timeslot 5
    phys_chan_config TCH/F
    hopping enabled 0
    e1 line 0 timeslot 7 sub-slot full
   timeslot 6
    phys_chan_config TCH/F
    hopping enabled 0
    e1 line 0 timeslot 8 sub-slot full
   timeslot 7
    phys_chan_config TCH/F
    hopping enabled 0
    e1 line 0 timeslot 9 sub-slot full
e1_input
 e1_line 0 driver dahdi
 e1_line 0 port 2