! osmo-bsc configuration example with 4 TRX
log stderr
 logging color 1
 logging print category-hex 0
 logging print category 1
 logging timestamp 0
 logging print file basename last
 logging print level 1

e1_input
 e1_line 0 driver ipa
network
 network country code 1
 mobile network code 1
 encryption a5 0
 neci 1
 paging any use tch 0
 mgw 0
  remote-ip 127.0.0.1
  remote-port 2427
  local-port 2727
 bts 0
  type osmo-bts
  band DCS1800
  cell_identity 6969
  location_area_code 0x0001
  base_station_id_code 63
  ms max power 15
  cell reselection hysteresis 4
  rxlev access min 0
  radio-link-timeout 32
  channel allocator mode set-all ascending
  rach tx integer 9
  rach max transmission 7
  channel-description attach 1
  channel-description bs-pa-mfrms 5
  channel-description bs-ag-blks-res 1
  early-classmark-sending forbidden
  ipa unit-id 6969 0
  oml ipa stream-id 255 line 0
  codec-support fr hr amr
  gprs mode none
  trx 0
   rf_locked 0
   arfcn 871
   nominal power 23
   ! to use full TRX power, set max_power_red 0
   max_power_red 20
   rsl e1 tei 0
   timeslot 0
    phys_chan_config CCCH
    hopping enabled 0
   timeslot 1
    phys_chan_config SDCCH8+CBCH
    hopping enabled 0
   timeslot 2
    phys_chan_config DYNAMIC/OSMOCOM
    hopping enabled 0
   timeslot 3
    phys_chan_config DYNAMIC/OSMOCOM
    hopping enabled 0
   timeslot 4
    phys_chan_config DYNAMIC/OSMOCOM
    hopping enabled 0
   timeslot 5
    phys_chan_config DYNAMIC/OSMOCOM
    hopping enabled 0
   timeslot 6
    phys_chan_config DYNAMIC/OSMOCOM
    hopping enabled 0
   timeslot 7
    phys_chan_config DYNAMIC/OSMOCOM
    hopping enabled 0
  trx 1
   rf_locked 0
   arfcn 873
   nominal power 23
   ! to use full TRX power, set max_power_red 0
   max_power_red 20
   rsl e1 tei 1
   timeslot 0
    phys_chan_config DYNAMIC/OSMOCOM
    hopping enabled 0
   timeslot 1
    phys_chan_config DYNAMIC/OSMOCOM
    hopping enabled 0
   timeslot 2
    phys_chan_config DYNAMIC/OSMOCOM
    hopping enabled 0
   timeslot 3
    phys_chan_config DYNAMIC/OSMOCOM
    hopping enabled 0
   timeslot 4
    phys_chan_config DYNAMIC/OSMOCOM
    hopping enabled 0
   timeslot 5
    phys_chan_config DYNAMIC/OSMOCOM
    hopping enabled 0
   timeslot 6
    phys_chan_config DYNAMIC/OSMOCOM
    hopping enabled 0
   timeslot 7
    phys_chan_config DYNAMIC/OSMOCOM
    hopping enabled 0
  trx 2
   rf_locked 0
   arfcn 875
   nominal power 23
   ! to use full TRX power, set max_power_red 0
   max_power_red 20
   rsl e1 tei 2
   timeslot 0
    phys_chan_config DYNAMIC/OSMOCOM
    hopping enabled 0
   timeslot 1
    phys_chan_config DYNAMIC/OSMOCOM
    hopping enabled 0
   timeslot 2
    phys_chan_config DYNAMIC/OSMOCOM
    hopping enabled 0
   timeslot 3
    phys_chan_config DYNAMIC/OSMOCOM
    hopping enabled 0
   timeslot 4
    phys_chan_config DYNAMIC/OSMOCOM
    hopping enabled 0
   timeslot 5
    phys_chan_config DYNAMIC/OSMOCOM
    hopping enabled 0
   timeslot 6
    phys_chan_config DYNAMIC/OSMOCOM
    hopping enabled 0
   timeslot 7
    phys_chan_config DYNAMIC/OSMOCOM
    hopping enabled 0
  trx 3
   rf_locked 0
   arfcn 877
   nominal power 23
   ! to use full TRX power, set max_power_red 0
   max_power_red 20
   rsl e1 tei 3
   timeslot 0
    phys_chan_config DYNAMIC/OSMOCOM
    hopping enabled 0
   timeslot 1
    phys_chan_config DYNAMIC/OSMOCOM
    hopping enabled 0
   timeslot 2
    phys_chan_config DYNAMIC/OSMOCOM
    hopping enabled 0
   timeslot 3
    phys_chan_config DYNAMIC/OSMOCOM
    hopping enabled 0
   timeslot 4
    phys_chan_config DYNAMIC/OSMOCOM
    hopping enabled 0
   timeslot 5
    phys_chan_config DYNAMIC/OSMOCOM
    hopping enabled 0
   timeslot 6
    phys_chan_config DYNAMIC/OSMOCOM
    hopping enabled 0
   timeslot 7
    phys_chan_config DYNAMIC/OSMOCOM
    hopping enabled 0
msc 0
 ! Do not allow emergency calls unless you can route
 ! them to the local emergency services
 allow-emergency deny
bsc
 mid-call-timeout 0